HP 3000 Manuals HP 3000 Manuals
(S/R) (Continued)
------------------------------------------------------------
2510 MESSAGE STMGT COULD NOT REMAP FILE TO NEW ACCESS RIGHTS.
(S/R 2510)
CAUSE Store internal error.
ACTION Call your Hewlett-Packard Support Representative.
-------------------------------------------------------------
2511 MESSAGE STMGT WAS UNABLE TO CLOSE FILE CORRECTLY. VOLUME
MANAGEMENT FAILED TO DECREMENT FILE OPEN COUNT
(FOCT). (S/R 2511)
CAUSE System internal error.
ACTION Call your Hewlett-Packard Support Representative.
-------------------------------------------------------------
2512 MESSAGE STMGT WAS UNABLE TO CLOSE ROOT DIRECTORY NODE.
(S/R 2512)
CAUSE System internal error.
ACTION Call your Hewlett-Packard Support Representative.
-------------------------------------------------------------
2513 MESSAGE STMGT WAS UNABLE TO CLOSE ACCOUNT DIRECTORY NODE.
(S/R 2513)
CAUSE System internal error.
ACTION Call your Hewlett-Packard Support Representative.
-------------------------------------------------------------
2514 MESSAGE STMGT WAS UNABLE TO CLOSE GROUP DIRECTORY NODE.
(S/R 2514)
CAUSE System internal error.
ACTION Call your Hewlett-Packard Support Representative.
-------------------------------------------------------------
2515 MESSAGE STMGT RETURNED BAD STATUS FROM SUBSYSTEM !, ERROR
!. (S/R 2515)
CAUSE System internal error.
ACTION Call your Hewlett-Packard Support Representative.
-------------------------------------------------------------
2516 MESSAGE STMGT WAS UNABLE TO ACCESS GLOBAL UNIQUE FILE
DESCRIPTOR (GUFD) OF FILE. (S/R 2516)
CAUSE System internal error.
ACTION Call your Hewlett-Packard Support Representative.
-------------------------------------------------------------
2601 MESSAGE GENFPARSE RETURNED UNKNOWN ERROR (S/R 2601)
CAUSE GENFPARSE returned an unknown error to
STORE/RESTORE (SUBSYS = FILE SYSTEM).
ACTION File a service request with Hewlett-Packard.
-------------------------------------------------------------
2602 MESSAGE GENFPARSE RETURNED STATUS FROM SUBSYSTEM !, ERROR
! (S/R 2602)
CAUSE GENFPARSE returned an unknown error to
STORE/RESTORE (SUBSYS = UNKNOWN).
ACTION File a service request with Hewlett-Packard.
-------------------------------------------------------------
2603 MESSAGE INVALID CHARACTER FOUND IN THE FILESET SPECIFIED
(S/R 2603)
CAUSE An invalid character was detected in the specified
fileset.
ACTION Correct the fileset name.
-------------------------------------------------------------
2604 MESSAGE THE FILE SET PATH SPECIFIED IS TOO LONG (S/R
2604)
CAUSE The specified file set path combined with the
current working directory exceeds the maximum
allowed path length.
ACTION Copy the file into a shorter length directory and
then store.
-------------------------------------------------------------
2605 MESSAGE THE FILE SET USES MALFORMED CHARACTER CLASS (S/R
2605)
CAUSE The file set uses malformed character class.
ACTION Correct the fileset name.
-------------------------------------------------------------
2608 MESSAGE A FILE NAME IN SPECIFIED PATH BEGINS WITH A "-"
(S/R 2608)
CAUSE A file name in specified path begins with a "-".
ACTION Correct the fileset name.
-------------------------------------------------------------
2609 MESSAGE A FILE SET SPECIFIED BEGINS WITH A "//" (S/R
2609)
CAUSE A file set specified begins with a "//".
ACTION Correct the fileset name.
-------------------------------------------------------------
2610 MESSAGE A NEGATIVE FILE SET CONTAINS ".." (S/R 2610)
CAUSE A negative HFS file set containing ".." was found
following an MPE file set.
ACTION Either make the right hand side MPE syntax or make
the left hand side HFS syntax.
-------------------------------------------------------------
2611 MESSAGE A NEGATIVE HFS FILE SET FOUND AFTER MPE FILESET.
IF THE LEFT HAND SIDE OF THE "fileset1 - fileset2"
IS AN MPE SET THEN THE RIGHT HAND SIDE MUST BE AN
MPE FILESET. NOTE THAT AN UNQUALIFIED FILESET IS
ALSO CONSIDERED AN HFS SET IF CURRENT WORKING
DIRECTORY IS NOT A GROUP. (S/R 2611)
CAUSE A negative HFS file set was found following an MPE
file set.
ACTION Either make the right hand side MPE syntax or make
the left hand side HFS syntax.
-------------------------------------------------------------
2612 MESSAGE THE HFS DOMAIN FILESET IS NOT ALLOWED WITH THE
RENAME OPTION (S/R 2612)
CAUSE An attempt was made to use an HFS domain file set
with the RENAME option.
ACTION Remove the RENAME option.
-------------------------------------------------------------
2613 MESSAGE A NAME COMPONENT IN THE PATH SPECIFIED EXCEEDS
THE MAXIMUM ALLOWED NAME LENGTH (S/R 2613)
CAUSE A HFS syntax filename component was too long.
ACTION Check the spelling and syntax of your input and
retype the STORE command.
-------------------------------------------------------------
2651 MESSAGE HFS FILE SCANNER ERROR SUBSYSTEM !, ERROR ! (S/R
2651)
CAUSE An unknown error was retured from the HFS scanner.
ACTION File a service request with Hewlett-Packard.
-------------------------------------------------------------
2652 MESSAGE ! NOT STORED: PATH DOES NOT EXIST
CAUSE The specified path does not exist.
ACTION Check the path name and retry.
-------------------------------------------------------------
2651 MESSAGE HFS FILE SCANNER ERROR SUBSYSTEM !, ERROR ! (S/R
2651)
CAUSE An unknown error was retured from the HFS scanner.
ACTION File a service request with Hewlett-Packard.
-------------------------------------------------------------
2652 MESSAGE ! NOT STORED: PATH DOES NOT EXIST
CAUSE The specified path does not exist.
ACTION Check the path name and retry.
-------------------------------------------------------------
2653 MESSAGE ! NOT STORED: SPECIFIED DIRECTORY TOO DEEP
CAUSE The specified directory is too many levels deep.
ACTION Copy the files into a shallower level directory and
then store.
-------------------------------------------------------------
2654 MESSAGE ! NOT STORED: UNKNOWN SCAN ERROR
CAUSE An unknown error was retured from the HFS scanner.
ACTION File a service request with Hewlett-Packard.
-------------------------------------------------------------
2655 MESSAGE ! NOT STORED: SECURITY VIOLATION
CAUSE A security violation was encountered.
ACTION Request that your system manager store the file.
-------------------------------------------------------------
2656 MESSAGE ! NOT STORED: NO TRAVERSE ACCESS
CAUSE The operation requires that the user have Traverse
Directory (TD) access.
ACTION Request your system manager to store the file.
-------------------------------------------------------------
2657 MESSAGE ! NOT STORED: EXCLUSIVE OPEN VIOLATION
CAUSE An exclusive file open violation occurred.
ACTION Wait for the file to be closed, then store.
-------------------------------------------------------------
2658 MESSAGE ! NOT CONSIDERED: PATH NAME TOO LONG
CAUSE The specified path name is too long
ACTION Copy the file into a shorter length directory and
then store.
-------------------------------------------------------------
2660 MESSAGE ! NOT STORED: SCANNER FAILED TO HPFOPEN NODE
CAUSE The scanner failed to HPFOPEN the node.
ACTION File a service request with Hewlett-Packard.
-------------------------------------------------------------
2661 MESSAGE ! NOT STORED: PATH NAME TOO LONG
CAUSE The specified path name is too long.
ACTION Copy the file into a shorter length directory and
then store.
-------------------------------------------------------------
2662 MESSAGE ! SKIPPED: TRANSPORT TO MPE/XL INFORMATION FILE
CAUSE The file HFSMAP._HFSGROUP._HFSACCT was not
restored.
ACTION Information only.
-------------------------------------------------------------
2663 MESSAGE ! NOT STORED: PATH NAME CONTAINED TOO MANY
SYMBOLIC LINKS POSSIBLE CIRCULAR DEFINITION I.E.
LINKA -> LINKB, LINKB -> LINKA
CAUSE The maximum number of symbolic link traversals was
exceeded. This could indicate a circular
definition.
ACTION Check the syntax of the input file set and reissue
the store command.
-------------------------------------------------------------
2701 MESSAGE THE UNDERBAR CHARACTER IS NOT ALLOWED WITH MPE
SYNTAX CFILE NAME (S/R 2701)
CAUSE The underbar character (_) was specified as part of
the file name in an MPE syntax entry.
ACTION Remove the underbar character or use HFS syntax.
-------------------------------------------------------------
2702 MESSAGE THE UNDERBAR CHARACTER IS NOT ALLOWED WITH MPE
SYNTAX GROUP NAME (S/R 2702)
CAUSE The underbar character (_) was specified as part of
the group name in an MPE syntax entry.
ACTION Remove the underbar character or use HFS syntax.
-------------------------------------------------------------
2703 MESSAGE THE UNDERBAR CHARACTER IS NOT ALLOWED WITH MPE
SYNTAX ACCOUNT NAME (S/R 2703)
CAUSE The underbar character (_) was specified as part of
the account name in an MPE syntax entry.
ACTION Remove the underbar character or use HFS syntax.
-------------------------------------------------------------
2704 MESSAGE STORE/RESTORE FAILED TO GET CURRENT WORKING
DIRECTORY FROM HIERARCHIAL DIRECTORY SUBSYSTEM.
LOGON GROUP ASSUMED AS THE CURRENT WORKING
DIRECTORY (S/R 2704)
CAUSE STORE/RESTORE failed to get the current working
directory from the hierarchial directory subsystem.
ACTION File a service request with Hewlett-Packard.
-------------------------------------------------------------
2705 MESSAGE ! NOT RESTORED: COULD NOT CREATE PATH
CAUSE The file was not stored because the path could not
be created.
ACTION Check to ensure that you have create directory
capabilities.
-------------------------------------------------------------
2706 MESSAGE FAILED TO CREATE TRANSPORT MAPPING FILE (S/R
2706)
CAUSE The transport mapping file was not created due to
the lack of available disk space.
ACTION Check for available disk space. If that is not a
problem, then file a service request with
Hewlett-Packard.
-------------------------------------------------------------
2707 MESSAGE RESTORE FAILED TO LINK IN THE OBJECT, ENCOUNTERED
ERROR ! FROM HPDIR SUBSYSTEM (S/R 2707)
CAUSE RESTORE failed to link in the object.
ACTION File a service request with Hewlett-Packard.
-------------------------------------------------------------
2708 MESSAGE ! NOT RESTORED: CREATE=PATH OPTION NEEDED
CAUSE The file was not restored because the CREATE=PATH
option is needed to create the missing portions of
the file path.
ACTION Specify the CREATE=PATH option.
-------------------------------------------------------------
2709 MESSAGE STORE/RESTORE ENCOUNTERED PASCAL LIBRARY ERROR !,
AT CODE OFFSET ! (S/R 2709)
CAUSE A Pascal Library error was encountered.
ACTION File a service request with Hewlett-Packard.
-------------------------------------------------------------
2710 MESSAGE ! NOT STORED: ACD TRANSLATION ERROR (S/R 2710)
CAUSE An ACD translation error was encountered.
ACTION File a service request with Hewlett-Packard.
-------------------------------------------------------------
2711 MESSAGE ! NOT RESTORED: PATH IS NOT A DIRECTORY (S/R
2711)
CAUSE The specified path is not a directory.
ACTION Remove the existing file conflicting with the
incoming path and retry.
-------------------------------------------------------------
2712 MESSAGE RESTORE ENCOUNTERED ERROR ! FROM SUBSYS ! WHILE
CREATING USER/GROUP DATABASE. THE PXUTIL.PUB.SYS
UTILITY SHOULD BE RUN BY THE SYSTEM MANAGER TO
RECREATE THE DATABASES.
CAUSE An error was encountered while creating the
User/Group Database.
ACTION The system manager should run the PXUTIL.PUB.SYS
utility to recreate the databases. Also you should
file a service request with Hewlett-Packard.
-------------------------------------------------------------
2713 MESSAGE THE BACKWARD TRANSPORT NAMES GENERATED FOR
HIERARCHIAL DOMAIN FILES WRAPPED AROUND. RESTORING
THIS MEDIA ON MPE XL 4.0 AND BEFORE MAY NOT RESTORE
ALL OF THE HFS DOMAIN FILES. (S/R 2713)
CAUSE The backward transport names generated for
hierarchial domain files wrapped around.
ACTION Do not use this media for backward migration to
pre-HFS systems.
-------------------------------------------------------------
2714 MESSAGE ! NOT RESTORED: ERROR WAS ENCOUNTERED RESTORING
ACD/OWNER OF THIS DIRECTORY. (S/R 2714)
CAUSE An error was encountered restoring the ACD/Owner of
this directory.
ACTION Check capabilities to alter the existing directory.
If the capabilities are appropriate, then file a
service request with Hewlett-Packard.
-------------------------------------------------------------
2715 MESSAGE THE UDERBAR CHARACTER IS NOT ALLOWED WITH MPE
SYNTAX LOCKWORD. (S/R 2715)
CAUSE An attempt was made to use the underbar character
(_) as part of the lockword.
ACTION Remove the underbar character from the lockword.
-------------------------------------------------------------
2716 MESSAGE ! NOT RESTORED: SECURITY VIOLATION. FAILED TO
RESET OWNER OF THIS DIRECTORY ON DISK (S/R 2716)
CAUSE A security violation was encountered while
attempting to reset the owner of the directory.
ACTION Check capabilities to alter the existing directory.
If the capabilities are appropriate, then file a
service request with Hewlett-Packard.
-------------------------------------------------------------
2717 MESSAGE ! NOT RESTORED: SECURITY VIOLATION. FAILED TO
RESET ACD OF THIS DIRECTORY ON DISK (S/R 2717)
CAUSE A security violation was encountered while
attempting to reset the ACD of the directory.
ACTION Check capabilities to alter the existing directory.
If the capabilities are appropriate, then file a
service request with Hewlett-Packard.
-------------------------------------------------------------
2718 MESSAGE ! WILL BE RESTORED WITH ORIGINAL CREATOR.
SECURITY VIOLATION WHILE ATTEMPTING TO ALTER
CREATOR
CAUSE The UID for this file could not be altered.
ACTION Check capabilities to alter the creator. If the
capabilities are appropriate, then file a service
request with Hewlett-Packard.
-------------------------------------------------------------
2719 MESSAGE NAME BUFFER OVERFLOWED WHILE TRYNIG TO DISPLAY A
FILE MESSAGE. (S/R 2719).
CAUSE The HFS syntax name is too long to be displayed.
ACTION None - the name of this file will not be displayed.
-------------------------------------------------------------
2720 MESSAGE ! NOT RESTORED: SYSTEM RESTRICTION ON SAVE FILE
CAUSE The file could not be restored because of
implementation. Possiblities include trying to
save "." or ".." to the directory.
ACTION Contact your HP representative.
-------------------------------------------------------------
2732 MESSAGE 'NODECOMPRESS' CANNOT BE USED WITH THE 'LISTDIR'
OPTION (S/R 2732)
CAUSE The NODECOMPRESS and LISTDIR options cannot be used
together.
ACTION Remove one of the two options and retype the
command.
-------------------------------------------------------------
2733 MESSAGE WARNING: 'NODECOMPRESS' OPTION REDUNDANTLY
SPECIFIED (S/R 2733)
CAUSE The NODECOMPRESS option was entered more than once.
ACTION Information only.
-------------------------------------------------------------
2734 MESSAGE VSTORE WAS UNABLE TO ALLOCATE SUFFICIENT MEMORY
RESOURCES TO CARRY OUT DECOMPRESSION VALIDATION
(S/R 2734)
CAUSE Due to memory pressure, VSTORE failed to allocate
necessary memory.
ACTION Attempt to free up some memory on the system and
reissue the command.
-------------------------------------------------------------
2744 MESSAGE WARNING: 'STATISTICS' OPTION HAS BEEN REDUNDANTLY
SPECIFIED (S/R 2744)
CAUSE The STATISTICS option was specified more than once.
ACTION Information only.
-------------------------------------------------------------
2745 MESSAGE 'STATISTICS' OPTION CANNOT BE USED WITH
'TRANSPORT' TO MPEv. (S/R 2745)
CAUSE The STATISTICS option cannot be used when creating
MPEv media.
ACTION Remove one of the options and re-run the command.
-------------------------------------------------------------
2801 MESSAGE ! DATABASE NOT STORED: ERROR RETRIEVING FILE LIST
OF IMAGE DATABASE
CAUSE STORE cannot store the specified IMAGE database
because it could not determine what files were in
the database.
ACTION Make sure that the root file of your database is
not corrupted. You can also specify the ;PARTIALDB
option to force STORE to store all available
database files.
-------------------------------------------------------------
2802 MESSAGE ! DATABASE NOT STORED: ERROR RETRIEVING FILE LIST
OF ALLBASE DATABASE
CAUSE STORE cannot store the specified ALLBASE database
because it could not determine what files were in
the database.
ACTION Make sure that the root file of your database is
not corrupted. You can also specify the ;PARTIALDB
option to force STORE to store all available
database files.
-------------------------------------------------------------
2807 MESSAGE ! NOT STORED: FILE IS PART OF AN IMAGE DATABASE
AND ROOT IS NOT SPECIFIED.
CAUSE Your fileset list includes files which belong to an
image database whose root file is not specified.
ACTION Specify the root file name in the fileset list or
use ;PARTIALDB option to force STORE to store all
available database files.
-------------------------------------------------------------
2808 MESSAGE ! NOT STORED: FILE IS PART OF AN ALLBASE DB
ENVIRONMENT AND DBCON IS NOT SPECIFIED.
CAUSE Your fileset list includes files which belong to a
ALLBASE database whose DBCON file is not specified
in the fileset.
ACTION Include the DBCON file in your fileset list or use
;PARTIALDB option to force STORE to store all
available database files.
-------------------------------------------------------------