HP 3000 Manuals HP 3000 Manuals
(S/R) (Continued)
------------------------------------------------------------
1030 MESSAGE EXPECTED AN ACCOUNT NAME PART TO FOLLOW
'fname[/lockword].gname,', NOT A ",", ";" OR END OF
DATA. SYNTAX
'fname[/lockword][.gname[.aname]]' (S/R 1030)
CAUSE You did not type a valid account after the group
name.
ACTION Check the syntax and retype the command.
-------------------------------------------------------------
1031 MESSAGE A FILESET NAME PART MUST START WITH A-Z OR ANY
WILDCARD THAT SPECIFIES A SUBSET OF A-Z ('?', '@',
OR A CHARACTER SET). THE REST OF THE CHARACTERS
MUST BE ALPHANUMERIC OR WILDCARDS. SYNTAX
'fname[/lockword][.gname[.aname]]' (S/R 1031)
CAUSE You probably mistyped the file name.
ACTION Retype the command.
-------------------------------------------------------------
1032 MESSAGE EXPECTED A FILE NAME PART NOT A ".". A "." IS
USED TO SEPARATE PARTS OF A FILENAME. SYNTAX
'fname[/lockword][.gname[.aname]]' (S/R 1032)
CAUSE You did not type the file name correctly.
ACTION Check the syntax and retype the command.
-------------------------------------------------------------
1033 MESSAGE EXPECTED A GROUP NAME PART TO FOLLOW
'fname[/lockword].' NOT A ".". A "." IS USED TO
SEPARATE PARTS OF A FILENAME. SYNTAX
'fname[/lockword][.gname[.aname]]' (S/R 1033)
CAUSE You did not type the group name correctly.
ACTION Retype the command with a valid group name.
-------------------------------------------------------------
1034 MESSAGE EXPECTED AN ACCOUNT NAME PART TO FOLLOW
'fname[/lockword].gname', NOT A ".". A "." IS USED
TO SEPARATE PARTS OF A FILENAME. SYNTAX
'fname[/lockword][.gname[.aname]]' (S/R 1034)
CAUSE You did not type the account name correctly.
ACTION Retype the command with a valid account name.
-------------------------------------------------------------
1035 MESSAGE INVALID CHARACTER IN FILESET NAME PART. A
FILESET NAME PART MUST START WITH A-Z OR ANY
WILDCARD THAT SPECIFIES A SUBSET OF A-Z ('?', '@',
OR A CHARACTER SET). THE REST OF THE CHARACTERS
MUST BE ALPHANUMERIC OR WILDCARDS. SYNTAX
'fname[/lockword][.gname[.aname]]' (S/R 1035)
CAUSE You probably mistyped the name of the file set.
ACTION Retype the command.
-------------------------------------------------------------
1036 MESSAGE USER EXCEEDED MAXIMUM INDIRECT FILE NESTING
LEVEL. (S/R 1036)
CAUSE Same as the message content.
ACTION Reduce the indirect file nesting level.
-------------------------------------------------------------
1037 MESSAGE STORE/RESTORE WAS UNABLE TO OPEN INDIRECT FILE.
(S/R 1037)
CAUSE Various problems an causes.
ACTION Call your Hewlett-Packard Support Representative.
-------------------------------------------------------------
1038 MESSAGE INDIRECT FILE RECORD SIZE IS INVALID. IT MUST BE
BETWEEN 8 AND 1024 BYTES. (S/R 1038)
CAUSE Same as the message content.
ACTION Rebuild the indirect file.
-------------------------------------------------------------
1039 MESSAGE STORE/RESTORE COULD NOT OBTAIN READ ACCESS TO
INDIRECT FILE. (S/R 1039)
CAUSE Various problems and causes.
ACTION Call your Hewlett-Packard Support Representative.
-------------------------------------------------------------
1040 MESSAGE STORE/RESTORE ENCOUNTERED ERROR REWINDING
INDIRECT FILE. (S/R 1040)
CAUSE Various problems and causes.
ACTION Call your Hewlett-Packard Support Representative.
-------------------------------------------------------------
1041 MESSAGE STORE/RESTORE ENCOUNTERED ERROR READING INDIRECT
FILE. (S/R 1041)
CAUSE Various problems and causes.
ACTION Call your Hewlett-Packard Support Representative.
-------------------------------------------------------------
1042 MESSAGE STORE/RESTORE WAS UNABLE TO CLOSE INDIRECT FILE
(S/R 1042)
CAUSE Various problems and causes.
ACTION Call your support representative.
-------------------------------------------------------------
1043 MESSAGE ! NOT STORED: FILE NOT FOUND IN DIRECTORY
CAUSE The file does not exist on the system.
ACTION Specify another file.
-------------------------------------------------------------
1044 MESSAGE ! NOT STORED: DIRECTORY NODE IN PATH SUFFERED MAP
IN FAILURE. NODE PROBABLY HAS EXTENTS ON UNMOUNTED
VOLUME
CAUSE Various problems and causes.
ACTION Call your support representative.
-------------------------------------------------------------
1045 MESSAGE ! NOT STORED: VOLUMESET SPECIFIED IN DIRECTORY
PATH DOES NOT EXIST ON THIS SYSTEM
CAUSE Same as the message content.
ACTION Specify another volumeset.
-------------------------------------------------------------
1046 MESSAGE ! NOT STORED: SPECIFIED ACCOUNT DOES NOT EXIST
CAUSE Same as the message content.
ACTION Specify another account.
-------------------------------------------------------------
1047 MESSAGE ! NOT STORED: SPECIFIED GROUP DOES NOT EXIST
CAUSE Same as the message content.
ACTION Specify another group.
-------------------------------------------------------------
1048 MESSAGE ! NOT STORED: SPECIFIED FILE DOES NOT EXIST
CAUSE Same as the message content.
ACTION Specify another file.
-------------------------------------------------------------
1049 MESSAGE ! NOT STORED: ACCOUNT DOES NOT EXIST ON VOLUMESET
SPECIFIED IN DIRECTORY PATH
CAUSE Same as the message content.
ACTION Specify another account.
-------------------------------------------------------------
1050 MESSAGE ! NOT STORED: GROUP DOES NOT EXIST ON VOLUMESET
SPECIFIED IN DIRECTORY PATH
CAUSE Same as the message content.
ACTION Specify another group.
-------------------------------------------------------------
1051 MESSAGE ! NOT STORED: ERROR IN DIRECTORY SEARCH (FIND)
ROUTINE.
CAUSE Various problems and causes.
ACTION Call your support representative.
-------------------------------------------------------------
1052 MESSAGE CATASTROPHIC DIRECTORY ERROR. ROOT NODE OPEN
FAILURE. (S/R 1052)
CAUSE Various problems and causes.
ACTION Call your Hewlett-Packard Support Representative.
-------------------------------------------------------------
1053 MESSAGE ! SEARCH PATH ENCOUNTERED A DIRECTORY NODE THAT
SUFFERED MAP IN FAILURE. SOME FILES WILL NOT BE
STORED. NODE PROBABLY HAS EXTENTS ON UNMOUNTED
VOLUME. (S/R 1053)
CAUSE Various problems and causes.
ACTION Call your Hewlett-Packard Support Representative.
-------------------------------------------------------------
1054 MESSAGE ! SEARCH PATH ENCOUNTERED A DIRECTORY NODE THAT
SUFFERED INTERNAL ACCESS ERROR. SOME FILES WILL NOT
BE STORED. (S/R 1054)
CAUSE Various problems and causes.
ACTION Call your Hewlett-Packard Support Representative.
-------------------------------------------------------------
1055 MESSAGE ! NOT STORED: NO MATCHING FILES FOUND
CAUSE The files do not exist on the system.
ACTION Specify other files.
-------------------------------------------------------------
1056 MESSAGE ! NOT RESTORED: FILE NOT FOUND ON MEDIA
CAUSE The files do not exist on the tape.
ACTION Specify other files.
-------------------------------------------------------------
1057 MESSAGE ! NOT RESTORED: NO MATCHING FILES FOUND ON MEDIA
CAUSE The files do not exist on the tape.
ACTION Specify other files.
-------------------------------------------------------------
1059 MESSAGE SPECIFIED DATA BASE ROOT FILE NAME IS TOO LONG.
IT MUST BE SIX CHARACTERS OR LESS TO BE A VALID
ROOT FILE NAME. (S/R 1059)
CAUSE You specified a data base root file name that was
more than six characters.
ACTION Enter a data base root file name that has six
characters or less.
-------------------------------------------------------------
1060 MESSAGE INVALID SYNTAX
IN CHARACTER SET WILDCARDING. (S/R 1060)
CAUSE You included some invalid character.
ACTION Retype the command.
-------------------------------------------------------------
1061 MESSAGE EXCLUSION FILESETS MAY NOT BE USED AS PARTS OF
REDIRECTION FILESETS. EXCLUSION CAN ONLY BE PART
OF THE ORIGINAL FILESET. SYNTAX 'fname[/
lockword][.gname[.aname][-..][=fname[..][:creator]]'
(S/R 1061)
CAUSE You cannot use exclusion filesets as parts of your
target filesets in RENAME option.
ACTION Put exclusion fileset before redirection file name
and retype the command.
-------------------------------------------------------------
1062 MESSAGE INDIRECT FILES MAY NOT BE USED AS
(REDIRECTION) FILESETS. SYNTAX
'fname[/lockword][.gname[.aname][=fname[..][:creator]]'
(S/R 1062)
CAUSE INdirect files are not allowed in target fileset
name in RENAME option.
ACTION Check the syntax and retype the command.
-------------------------------------------------------------
1063 MESSAGE EXPECTED A FILE NAME PART NOT A "=". A "=" IS
USED TO INDICATE NAME REDIRECTION. SYNTAX
'fname[/lockword][.gname[.aname]]' (S/R 1063)
CAUSE You have not entered a filename before the '=' sign
for RENAME option.
ACTION Retype the command and include a filename.
-------------------------------------------------------------
1064 MESSAGE EXPECTED A GROUP NAME PART TO FOLLOW
'fname[/lockword].' NOT A "=". A "=" IS
USED TO INDICATE NAME REDIRECTION. SYNTAX
'fname[/lockword][.gname[.aname]]' (S/R 1064)
CAUSE You have not entered a group name after the
'fname.' for RENAME option.
ACTION Retype the command and enter a group name after
'fname.' .
-------------------------------------------------------------
1065 MESSAGE EXPECTED AN ACCOUNT NAME PART TO FOLLOW
'fname[/lkwd].gname.' "=". A "=" IS USED TO
INDICATE NAME REDIRECTION. SYNTAX
'fname[/lockword][.gname[.aname]]' (S/R 1065)
CAUSE You have not entered an account name after 'gname.'
for RENAME option.
ACTION Retype the command and include a account name after
'gname.'.
-------------------------------------------------------------
1066 MESSAGE REDIRECTION FILESETS (NAME REDIRECTION) CANNOT BE
USED WITH INDIRECT FILES (S/R 1066)
CAUSE Target fileset cannot be used with indircet files
for RENAME option.
ACTION Check the syntax and retype the command.
-------------------------------------------------------------
1067 MESSAGE ONLY ONE REDIRECTION CAN BE SPECIFIED PER
FILESET. (S/R 1067)
CAUSE You have specified more than one new filename
specification for a file, using the = syntax and
the RENAME option.
ACTION Check the syntax of your command, only specifying
one target name per fileset, and redo the store
command.
-------------------------------------------------------------
1068 MESSAGE EXPECTED A FILE NAME PART NOT A ":". A ":" IS
USED TO INDICATE CREATOR NAME REDIRECTION. SYNTAX
'fname[/lockword][.gname[.aname]]' (S/R 1068)
CAUSE You have not entered a filename for RENAME option.
ACTION Check the syntax and retype the command.
-------------------------------------------------------------
1069 MESSAGE EXPECTED A GROUP NAME PART TO FOLLOW
'fname[/lockword].' NOT A ":". A ":" IS USED TO
INDICATE CREATOR NAME REDIRECTION. SYNTAX
'fname[/lockword][.gname[.aname]]' (S/R 1069)
CAUSE You have not entered a group name after 'fname.'
for RENAME option.
ACTION Check the syntax and retype the command.
-------------------------------------------------------------
1070 MESSAGE EXPECTED AN ACCOUNT NAME PART TO FOLLOW
'fname[/lkwd].gname.' ":". A ":" IS USED TO
INDICATE CREATOR NAME REDIRECTION. SYNTAX
'fname[/lockword][.gname[.aname]]' (S/R 1070)
CAUSE You have not entered an account name after 'gname.'
ACTION Check the syntax and retype the command.
-------------------------------------------------------------
1071 MESSAGE A ':' IS USED TO INDICATE CREATOR NAME
REDIRECTION AND CAN ONLY BE USED IN CONJUNCTION
WITH FILE '=' REDIRECTION. SYNTAX
'fname[/lockword][.gname[.aname][=fname[..][:creator]]
CAUSE Misuse of colon.
ACTION Only use colon with RENAME to specify a new
creator.
-------------------------------------------------------------
1072 MESSAGE EXPECTED A ',', OR ';' TO FOLLOW THE CREATOR
NAME PART OF A FILESET. ',' SEPARATES THIS
FILESET FROM THE NEXT, AND ';' SPECIFIES
THE END OF THE FILESETLIST. SYNTAX
'fname[/lockword][.gname[.aname][=fname[..][:creator]]
(S/R 1072)
CAUSE Invalid character as a seperator following creator
name.
ACTION Check the syntax and retype the command.
-------------------------------------------------------------
1073 MESSAGE INVALID CHARACTER(S) IN CREATOR NAME. CREATOR
NAME MUST BE ALPHANUMERIC BEGINNING WITH 'A-Z'
AND BE NO MORE THAN 8 CHARACTERS IN LENGTH (S/R
1073)
CAUSE You have entered an invalid creator name.
ACTION Check the syntax and retype the command.
-------------------------------------------------------------
1074 MESSAGE SPECIFIED CREATOR NAME IS TOO LONG. THE MAXIMUM
LENGTH OF A CREATOR NAME IS 8 CHARACTERS. SYNTAX
'fname[/lockword][.gname[.aname][=fname[..][:creator]]
(S/R 1074)
CAUSE You have entered an invalid creator name.
ACTION Check the syntax and retype the command.
-------------------------------------------------------------
1075 MESSAGE THE ONLY VALID WILDCARD NAME FOR A REDIRECTION
FILE NAME PART IS '@'. E.G. A@.B.C=@.D (S/R 1075)
CAUSE Trying to use regular store wildcarding.
ACTION RENAME does not allow the mixing of wild cards and
alphanumeric characters in a target file name.
-------------------------------------------------------------
1076 MESSAGE REDIRECTION FILE NAMES CAN NOT
CONTAIN LOCKWORDS. SYNTAX
'fname[/lockword][..]=fname[.gname[.accname][:creator]]
(S/R 1076)
CAUSE Lockwords are not allowed with the redirection file
when a RENAME option is specified.
ACTION Delete the lockwork and retype the command.
-------------------------------------------------------------
1079 MESSAGE A REDIRECTION FILE NAME MAY END IN A SLASH OR
HAVE WILDCARDS BUT NOT BOTH E.G. /A/G/F@=/D/E/F/
OR /A/G/F@=/D/@/@ (S/R 1079)
CAUSE The redirection file name specified a directory
with trailing slash. Directories cannot be
wildcarded.
ACTION Either remove trailing slash or all wildcards.
-------------------------------------------------------------
1080 MESSAGE THE ONLY VALID WILDCARD NAME FOR A REDIRECTION
CREATOR NAME PART IS '@'. E.G. A@.B.C=@.D:U.@ OR
A@.B.C=@.D:@.A (S/R 1080)
CAUSE Invalid wildcard specification in creator name.
ACTION Use a single '@' in creator name and/or creator
account name.
-------------------------------------------------------------
1081 MESSAGE ! NOT STORED: FILE NOT FOUND
CAUSE A file that was specified to be stored was not
found on the system.
ACTION Check your input fileset and retype the STORE
command.
-------------------------------------------------------------
1201 MESSAGE VOLUMESET "!" SPECIFIED IN THE 'VOLSET' OPTION
DOES NOT EXIST ON THE SYSTEM. (S/R 1201)
CAUSE Same as the message content.
ACTION Specify another volumeset.
-------------------------------------------------------------
1202 MESSAGE VOLUME CLASS "!" SPECIFIED IN THE 'VOLCLASS'
OPTION DOES NOT EXIST ON THE SPECIFIED VOLUMESET.
"MPEXL_SYSTEM_VOLUME_SET" IS THE DEFAULT VOLUME_SET
IF NONE WAS SPECIFIED (S/R 1202)
CAUSE Same as the message content.
ACTION Specify another volume class.
-------------------------------------------------------------
1203 MESSAGE VOLUME "!" SPECIFIED IN THE 'VOL' OPTION DOES
NOT EXIST ON THE SPECIFIED VOLUME_SET.
"MPEXL_SYSTEM_VOLUME_SET" IS THE DEFAULT VOLUME_SET
IF NONE WAS SPECIFIED. (S/R 1203)
CAUSE Same as the message content.
ACTION Specify another volume.
-------------------------------------------------------------
1204 MESSAGE SPECIFIED LDEV IS NOT MOUNTED AT THIS TIME (S/R
1204)
CAUSE You specified a device that is not mounted.
ACTION Specify a mounted device.
-------------------------------------------------------------