HP 3000 Manuals HP 3000 Manuals
(S/R) (Continued)
------------------------------------------------------------
445 MESSAGE EXPECTED recovery type FOR THE 'ONERROR' OPTION.
EXPECTED ONE OF 'QUIT' OR 'SKIPFULL'. SYNTAX
'ONERR[OR]={QUIT} OR {SKIP}' (S/R 445)''
CAUSE You typed the onerror parameter incorrectly.
ACTION Check the syntax and retype the command.
-------------------------------------------------------------
446 MESSAGE 'ONERROR' OPTION CANNOT BE USED WITH THE
'LISTDIR' OPTION (S/R 446)
CAUSE Onerror and listdir options are not allowed on the
same command line.
ACTION Delete either onerror or listdir option and retype
the command.
-------------------------------------------------------------
447 MESSAGE 'ONERROR=FULL' FUNCTION NOT IMPLEMENTED (S/R
447)
CAUSE Onerror=full will be supported in the future
release.
ACTION Information only.
-------------------------------------------------------------
451 MESSAGE WARNING: 'SHOW' OPTION HAS BEEN REDUNDANTLY
SPECIFIED (S/R 451)
CAUSE The SHOW option was entered more than once.
ACTION Information only.
-------------------------------------------------------------
452 MESSAGE EXPECTED '=showparm[,showparm..]' AFTER 'SHOW'
OPTION WHERE showparm IS ONE OF 'SHORT', 'LONG',
'DATES', 'OFFLINE', OR 'SECURITY'. SYNTAX
'SHOW=showparm[,showparm....]' (S/R 452)
CAUSE You typed the show parameter incorrectly.
ACTION Check the syntax and retype the command.
-------------------------------------------------------------
453 MESSAGE 'SHORT' AND 'LONG' PARAMETERS OF THE 'SHOW'
OPTION HAVE BEEN MERGED. THE FIRST SPECIFIED (LONG)
WILL BE USED (S/R 453)
CAUSE Show=long will be used.
ACTION Information only.
-------------------------------------------------------------
454 MESSAGE 'SHORT' AND 'LONG' PARAMETERS OF THE 'SHOW'
OPTION HAVE BEEN MERGED. THE FIRST SPECIFIED
(SHORT) WILL BE USED (S/R 454)
CAUSE Show=short will be used.
ACTION Information only.
-------------------------------------------------------------
455 MESSAGE UNKNOWN PARAMETER SPECIFIED FOR THE 'SHOW'
OPTION. EXPECTED ONE OF 'SHORT', 'LONG', 'DATES',
'OFFLINE', 'PATH', OR 'SECURITY'. SYNTAX
'SHOW=showparm[,showparm....]' (S/R 455)
CAUSE You did not type a valid show parameters.
ACTION Check the syntax and retype the command.
-------------------------------------------------------------
456 MESSAGE EXPECTED showparm FOR THE 'SHOW' OPTION.
EXPECTED ONE OF 'SHORT', 'LONG', 'DATES',
'OFFLINE', 'PATH', OR 'SECURITY'. SYNTAX
'SHOW=showparm[,showparm....]' (S/R 456)
CAUSE You type the show parameters incorrectly.
ACTION Check the syntax and retype the command.
-------------------------------------------------------------
457 MESSAGE 'SHOW' OPTION CANNOT BE USED WITH THE 'LISTDIR'
OPTION. (S/R 457)
CAUSE Show and listdir options are not allowed on the
same command line.
ACTION Delete either show or listdir option and retype the
command.
-------------------------------------------------------------
458 MESSAGE 'SHORT' OPTION CANNOT BE USED WITH THE
'NAMESONLY' OPTION (S/R 458)
CAUSE The namesonly and short suboptions to SHOW cannot
be used together.
ACTION Retype the command, specifying only one of short or
namesonly.
-------------------------------------------------------------
459 MESSAGE 'LONG' OPTION CANNOT BE USED WITH THE 'NAMESONLY'
OPTION (S/R 459)
CAUSE The namesonly and long suboptions to SHOW cannot be
used together.
ACTION Retype the command, specifying only one of long or
namesonly.
-------------------------------------------------------------
461 MESSAGE WARNING: 'DEV' OPTION HAS BEEN REDUNDANTLY
SPECIFIED. LAST SPECIFIED 'DEV' WILL BE USED.
(S/R 461)
CAUSE The DEV option was entered more than once.
ACTION Information only.
-------------------------------------------------------------
462 MESSAGE 'DEV' OPTION CANNOT BE USED WITH THE 'VOL'
OPTION. (S/R 462)
CAUSE Dev and vol options are not allowed on the same
command line.
ACTION Delete either dev or vol option and retype the
command.
-------------------------------------------------------------
463 MESSAGE 'DEV' OPTION CANNOT BE USED WITH THE 'VOLCLASS'
OPTION. (S/R 463)
CAUSE Dev and volclass options are not allowed on the
same command line.
ACTION Delete either dev or volclass option and retype the
command.
-------------------------------------------------------------
464 MESSAGE 'DEV' OPTION CANNOT BE USED WITH THE 'VOLSET'
OPTION. (S/R 464)
CAUSE Dev and volset options are not allowed on the same
command line.
ACTION Delete either dev or volset option and retype the
command.
-------------------------------------------------------------
465 MESSAGE EXPECTED '=ldn' OR '=deviceclass' AFTER 'DEV'
OPTION, WHERE ldn IS A LOGICAL DEVICE NUMBER OF A
MOUNTED DISC VOLUME AND deviceclass IS THE NAME OF
A VOLUME CLASS THAT IS ON A VOLUME SET CURRENTLY
MOUNTED ON YOUR SYSTEM. SYNTAX
'DEV=device' WHERE device IS AN ldn OR A
deviceclass. (S/R 465)
CAUSE You did not include a ldn or deviceclass after the
dev option.
ACTION Retype the command and include ldn or deviceclass.
-------------------------------------------------------------
466 MESSAGE THE SPECIFIED ldn (LOGICAL DEVICE NUMBER) DOES
NOT CORRESPOND TO THE DISC VOLUME THAT IS CURRENTLY
MOUNTED ON THE SYSTEM. TO BE MOUNTED, THE VOLUME
MUST BE A MEMBER OF AN "OPENED" VOLUME SET (S/R
466)
CAUSE The system does not recognize ldev number
specified.
ACTION Enter the correct ldev number and try again.
-------------------------------------------------------------
467 MESSAGE INVALID DEVICECLASS NAME SPECIFIED FOR 'DEV'
OPTION. A DEVICECLASS NAME MUST START WITH AN
ALPHA "A-Z" AND CONTAIN ONLY ALPHANUMERIC "A-Z,
0-9", OR "_". SYNTAX
'DEV=device' WHERE device IS AN ldn OR A
deviceclass (S/R 467)
CAUSE The deviceclass name is misspelled or not
recognized by the system.
ACTION Retype the command using a valid name.
-------------------------------------------------------------
468 MESSAGE DEVICECLASS NAME SPECIFIED FOR 'DEV' OPTION
EXCEEDED THE MAXIMUM ALLOWABLE LENGTH OF 16
CHARACTERS. SYNTAX
'DEV=device' WHERE device IS AN ldn OR A
deviceclass. (S/R 468)
CAUSE You entered deviceclass name that was more than 16
characters.
ACTION Enter a deviceclass name that has 16 characters or
less.
-------------------------------------------------------------
469 MESSAGE EXPECTED 'ldn' OR 'deviceclass' AFTER 'DEV=' IN
'DEV' OPTION. WHERE ldn is A LOGICAL DEVICE NUMBER
OF A MOUNTED DISC VOLUME AND deviceclass IS THE
NAME OF A VOLUME CLASS THAT IS ON A VOLUME SET
CURRENTLY MOUNTED ON YOUR SYSTEM. A DEVICECLASS
NAME MUST START WITH AN ALPHA "A-Z" AND CONTAIN
ONLY ALPHANUMERIC "A-Z, 0-9", OR "_". SYNTAX
'DEV=device' WHERE device IS AN ldn OR A
deviceclass (S/R 469)
CAUSE You type the dev parameter incorrectly.
ACTION Check the syntax and retype the command.
-------------------------------------------------------------
470 MESSAGE 'DEV' OPTION CANNOT BE USED WITH THE 'LISTDIR'
OPTION (S/R 470)
CAUSE Dev and listdir options are not allowed on the same
command line.
ACTION Delete either dev or listdir option and retype the
command.
-------------------------------------------------------------
471 MESSAGE 'GROUP' OPTION HAS BEEN REDUNDANTLY SPECIFIED
(S/R 471)
CAUSE The GROUP option was entered more than once.
ACTION Information only.
-------------------------------------------------------------
472 MESSAGE 'GROUP' OPTION CANNOT BE USED IN CONJUNCTION WITH
THE 'LOCAL' OPTION (S/R 472)
CAUSE Group and local options are not allowed on the same
command line.
ACTION Delete either group or local option and retype the
command.
-------------------------------------------------------------
473 MESSAGE EXPECTED '=groupname' AFTER 'GROUP' OPTION WHERE
groupname IS THE NAME OF "GROUP" WHERE THE
SPECIFIED SET OF FILES IS TO BE RESTORED. SYNTAX
'GROUP=groupname' (S/R 473)
CAUSE You typed the group parameter incorrectly.
ACTION Check the syntax and retype the command.
-------------------------------------------------------------
474 MESSAGE EXPECTED 'groupname' TO BE SPECIFIED FOR 'GROUP'
OPTION. A groupname NAME MUST START WITH AN ALPHA
"A-Z" AND CONTAIN ONLY ALPHANUMERIC "A-Z, 0-9" NOT
EXCEEDING 8 CHARACTERS IN LENGTH. SYNTAX
'GROUP=groupname' (S/R 474)
CAUSE You did not include the groupname for group option.
ACTION Check the syntax and retype the command.
-------------------------------------------------------------
475 MESSAGE 'GROUP' OPTION CANNOT BE USED WITH THE 'LISTDIR'
OPTION (S/R 475)
CAUSE Group and listdir options are not allowed on the
same command line.
ACTION Delete either group or listdir option and retype
the command.
-------------------------------------------------------------
481 MESSAGE 'ACCOUNT' OPTION HAS BEEN REDUNDANTLY SPECIFIED
(S/R 481)
CAUSE The ACCOUNT option was entered more than once.
ACTION Information only.
-------------------------------------------------------------
482 MESSAGE 'ACCOUNT' OPTION CANNOT BE USED IN CONJUNCTION
WITH THE 'LOCAL' & OPTION (S/R 482)
CAUSE Account and local options are not allowed on the
same command line.
ACTION Delete either account or local option and retype
the command.
-------------------------------------------------------------
483 MESSAGE EXPECTED '=accountname' AFTER 'ACCOUNT' OPTION
WHERE accountname IS THE NAME OF "ACCOUNT" WHERE
THE SPECIFIED SET OF FILES IS TO BE RESTORED.
SYNTAX
'ACC[OUN]T=accountname' (S/R 483)
CAUSE You did not type the account parameter correctly.
ACTION Check the syntax and retype the command.
-------------------------------------------------------------
484 MESSAGE EXPECTED 'accountname' TO BE SPECIFIED FOR
'ACCOUNT' OPTION. A accountname NAME MUST START
WITH AN ALPHA "A-Z" AND CONTAIN ONLY ALPHANUMERIC
"A-Z, 0-9" NOT EXCEEDING 8 CHARACTERS IN LENGTH.
SYNTAX
'ACC[OUN]T=accountname' (S/R 484)
CAUSE You did not include the accountname for account
option.
ACTION Check the syntax and retype the command.
-------------------------------------------------------------
485 MESSAGE 'ACCOUNT' OPTION CANNOT BE USED WITH THE
'LISTDIR' OPTION (S/R 485)
CAUSE Account and listdir options are not allowed on the
same command line.
ACTION Delete either account or listdir option and retype
the command.
-------------------------------------------------------------
501 MESSAGE WARNING: 'CREATE' OPTION HAS BEEN REDUNDANTLY
SPECIFIED (S/R 501)
CAUSE The CREATE option was entered more than once.
ACTION Information only.
-------------------------------------------------------------
502 MESSAGE 'CREATE' OPTION DEFAULTING TO
'CREATE=ACCOUNT,GROUP,CREATOR' BASED ON YOUR
CAPABILITIES. (S/R 502)
CAUSE Default parameters are used.
ACTION Information only.
-------------------------------------------------------------
503 MESSAGE 'CREATE' OPTION DEFAULTING TO
'CREATE=GROUP,CREATOR' BASED ON YOUR CAPABILITIES.
NOTE: ONLY GROUPS AND USERS IN YOUR ACCOUNT WILL BE
CREATED. (S/R 503)
CAUSE Create only creating groups and users in your
account.
ACTION Information only.
-------------------------------------------------------------
504 MESSAGE 'CREATE' OPTION REQUIRES (SM) CAPABILITY FOR
'ACCOUNT' PARAMETER AND (SM) AND/OR (AM) CAPABILITY
FOR 'GROUP' AND 'CREATOR' PARAMETERS. (S/R 504)
CAUSE You do not have system manager (SM) capability.
ACTION Log on to an account with SM or have your system
manager perform the tasks.
-------------------------------------------------------------
505 MESSAGE 'GROUP' PARAMETER OF THE 'CREATE' OPTION REQUIRES
(SM) AND/OR (AM) CAPABILITY. NOTE: (AM) CAPABILITY
WILL ONLY ALLOW YOU TO CREATE GROUPS IN YOUR HOME
ACCOUNT (S/R 505)
CAUSE You do not have system manager (SM) capability or
account manager (AM) capabilities for this account.
ACTION Log on to an account with system manager (SM)
capability or have your system manager perform the
tasks.
-------------------------------------------------------------
506 MESSAGE NOTE: WITH (AM) CAPABILITY 'GROUP' PARAMETER OF
THE 'CREATE' OPTION WILL ONLY ALLOW YOU TO CREATE
GROUPS IN YOUR HOME ACCOUNT. (S/R 506)
CAUSE You may only create groups in your home account.
ACTION Information only.
-------------------------------------------------------------
507 MESSAGE 'USER' PARAMETER OF THE 'CREATE' OPTION REQUIRES
(SM) AND/OR (AM) CAPABILITY. NOTE: (AM) CAPABILITY
WILL ONLY ALLOW YOU TO CREATE USERS IN YOUR HOME
ACCOUNT (S/R 507)
CAUSE You do not have system manager capability or
account manager capability.
ACTION Log on to an account with SM or have your system
manager perform the tasks.
-------------------------------------------------------------
508 MESSAGE 'ACCOUNT' PARAMETER OF THE 'CREATE' OPTION
REQUIRES (SM) CAPABILITY (S/R 508)
CAUSE Same as message content.
ACTION Include account parameter for the create option.
-------------------------------------------------------------
509 MESSAGE NOTE: WITH (AM) CAPABILITY 'USER' PARAMETER OF
THE 'CREATE' OPTION WILL ONLY ALLOW YOU TO CREATE
USER IN YOUR HOME ACCOUNT (S/R 509)
CAUSE You may only create users in your home account.
ACTION Information only.
-------------------------------------------------------------
510 MESSAGE UNKNOWN PARAMETER SPECIFIED FOR THE 'CREATE'
OPTION. EXPECTED ONE OF 'ACCOUNT', 'GROUP', OR
'CREATOR'. SYNTAX
'CREATE[=createparm[,createparm....]]' WHERE
createparm IS ONE OF 'ACCOUNT', 'GROUP', OR
'CREATOR' (S/R 510)
CAUSE You did not specify a valid create parameter.
ACTION Retype the command and include a valid create
parameter.
-------------------------------------------------------------
511 MESSAGE EXPECTED createparm FOR THE 'CREATE' OPTION.
EXPECTED ONE OF 'ACCOUNT', 'GROUP', OR 'CREATOR'.
SYNTAX
'CREATE[=createparm[,createparm....]]' WHERE
createparm IS ONE OF 'ACCOUNT', 'GROUP', OR
'CREATOR'. (S/R 511)
CAUSE You did not include the create parameter.
ACTION Retype the command and include a create parameter.
-------------------------------------------------------------
512 MESSAGE 'CREATE' OPTION CANNOT BE USED WITH THE 'LISTDIR'
OPTION (S/R 512)
CAUSE Create and listdir options are not allowed on the
same command line.
ACTION Delete either create or listdir option and retype
the command.
-------------------------------------------------------------
513 MESSAGE 'CREATE' OPTION DEFAULTING TO 'CREATE=PATH' BASED
ON YOUR CAPABILITIES. NOTE: ONLY PATHS ALLOWED BY
SECURITY RULES WILL BE CREATED (S/R 513)
CAUSE Since no suboptions were given to CREATE, the
default suboption is PATH, based on the user's
capabilities.
ACTION Information only.
-------------------------------------------------------------
521 MESSAGE 'CREATOR' OPTION HAS BEEN REDUNDANTLY SPECIFIED
(S/R 521)
CAUSE The CREATOR option was entered more than once.
ACTION Information only.
-------------------------------------------------------------
522 MESSAGE EXPECTED '=username' AFTER 'CREATOR' OPTION WHERE
username IS THE NAME OF "USER" WHO EXISTS IN THE
ACCOUNT WHERE THE SPECIFIED SET OF FILES IS TO BE
RESTORED SUCH THAT THE SPECIFIED USER IS TO BE THE
NEW "CREATOR" OF THE FILES. SYNTAX
'CREATOR[=username]' WHERE 'CREATOR' WITH NO
"username" SPECIFIED DEFAULTS TO THE ORIGNAL
CREATOR OF THE FILE. (S/R 522)
CAUSE You did not specify a valid creator parameter.
ACTION Check the syntax and retype the command.
-------------------------------------------------------------
523 MESSAGE EXPECTED 'username' TO BE SPECIFIED FOR 'CREATOR'
OPTION. A username NAME MUST START WITH AN ALPHA
"A-Z" AND CONTAIN ONLY ALPHANUMERIC "A-Z, 0-9" NOT
EXCEEDING 8 CHARACTERS IN LENGTH. SYNTAX
'CREATOR[=username]' WHERE 'CREATOR' WITH NO
"username" SPECIFIED DEFAULTS TO THE ORIGNAL
CREATOR OF THE FILE. (S/R 523)
CAUSE You did not specify the username for the creator
option.
ACTION Retype the command and include the username.
-------------------------------------------------------------
524 MESSAGE 'CREATOR' OPTION CANNOT BE USED WITH THE
'LISTDIR' OPTION (S/R 524)
CAUSE Creator and listdir options are not allowed on the
same command line.
ACTION Delete either creator or listdir option and retype
the command.
-------------------------------------------------------------