HP 3000 Manuals HP 3000 Manuals
"Nonclass" Errors (Cont'd.)
Interpreting SYSGEN Messages and Error Codes (Continued)
Input/Output (I/O) Configurator Messages (Continued).
1010 MESSAGE **error** can't read Ioclass configuration file
CAUSE SYSGEN cannot read the configuration data file
IOCLASSP. The program terminates.
ACTION Refer to the file system error for action to take.
-------------------------------------------------------------
1011 MESSAGE **error** can't reset Ioldev file
-------------------------------------------------------------
1012 MESSAGE **error** can't reset Ioclass file
-------------------------------------------------------------
1013 MESSAGE **error** can't reset Iovolume file
-------------------------------------------------------------
1015 MESSAGE **error** A device can only have ! volume
classes.
CAUSE Too many volume classes have been assigned to a
volume through the CLASS= parameter.
ACTION Limit the number of volume classes to the number
that appears in the message.
-------------------------------------------------------------
1016 MESSAGE **error** A device can only have ! classes.
CAUSE Too many classes have been assigned to an LDEV
through the CLASS= parameter.
ACTION Limit the number of classes to the number that
appears in the message.
-------------------------------------------------------------
1017 MESSAGE **error** can't write to Ioldev configuration
file
-------------------------------------------------------------
1018 MESSAGE **error** unknown device type
CAUSE The device type entered in the TYPE= parameter is
unsupported, or incorrectly specified.
ACTION Verify the type has been entered correctly, and is
an HP- supported device. The file IODFAULT.PUB.SYS
contains all currently supported devices. If your
device is not in IODFAULT, you must add it as a
USER device. Hewlett-Packard only supports devices
in the IODFAULT file.
-------------------------------------------------------------
1019 MESSAGE **error** device mode too long
-------------------------------------------------------------
1020 MESSAGE **error** illegal device mode for this device
CAUSE The device mode entered in the MODE= parameter is
not appropriate for this particular device.
ACTION Enter an appropriate mode. If necessary, check the
IODFAULT file for permissible modes.
-------------------------------------------------------------
1021 MESSAGE **error** This device is not supported.
CAUSE You have entered a product identification that does
not exist in IODFAULT.PUB.SYS. Usually, the error
is a simple entry mistake.
ACTION Enter the proper Hewlett-Packard product IDs. If
necessary, check for supported product IDs.
-------------------------------------------------------------
1022 MESSAGE **error** iopath level mismatch
CAUSE In specifying the MADDRESS command, the paths of
the FROM= and TO= parameters have different levels,
for example, MA 8.4.8 4.2. Usually, an entry
mistake.
ACTION Correct the path entry
-------------------------------------------------------------
1023 MESSAGE **error** can't find record in Ioldev
configuration file
CAUSE SYSGEN cannot find a particular record in the
configuration data file. The program terminates.
ACTION Refer to the file system error for action to take.
-------------------------------------------------------------
1024 MESSAGE **error** # new devices must watch # old devices
-------------------------------------------------------------
1025 MESSAGE **error** can't update record in Ioldev
configuration file
-------------------------------------------------------------
1026 MESSAGE **error** can't open I/O default file
-------------------------------------------------------------
1027 MESSAGE **error** iopath already exists
-------------------------------------------------------------
1029 MESSAGE **error** missing physical file for physical
manager
-------------------------------------------------------------
1030 MESSAGE **error** missing physical manager for physical
file
-------------------------------------------------------------
1031 MESSAGE **error** missing logical file for logical
manager
-------------------------------------------------------------
1032 MESSAGE **error** missing logical manager for logical
file
-------------------------------------------------------------
1034 MESSAGE **error** iopath does not exist
-------------------------------------------------------------
1037 MESSAGE **error** manage ! is not in the configuration
-------------------------------------------------------------
1038 MESSAGE **error** physical manager does not exist.
-------------------------------------------------------------
1039 MESSAGE **error** logical manager does not exist
-------------------------------------------------------------
1040 MESSAGE **error** can't write to Iopath configuration
file
-------------------------------------------------------------
1041 MESSAGE **error** can't delete I/O path.
-------------------------------------------------------------
1042 MESSAGE **error** can't find record in Iopath
configuration file
-------------------------------------------------------------
1043 MESSAGE **error** can't update Iopath configuration file
-------------------------------------------------------------
1044 MESSAGE **error** can't read from Iopath configuration
file
-------------------------------------------------------------
1045 MESSAGE **error** can't open I/O default file
-------------------------------------------------------------
1046 MESSAGE **error** I/O default file does not exist
-------------------------------------------------------------
1047 MESSAGE **warning** ldev ! already has ! classnames.
-------------------------------------------------------------
1048 MESSAGE class '!' cannot be added to it.
-------------------------------------------------------------
1049 MESSAGE **error** iopath must be added in an hierarchical
order
-------------------------------------------------------------
1050 MESSAGE I/O path specified has pending devices.
-------------------------------------------------------------
1051 MESSAGE Want to delete all of them (yes/no) ?
-------------------------------------------------------------
1052 MESSAGE ** no iopath is deleted **
-------------------------------------------------------------
1053 MESSAGE **error** this iopath has no logical device
manager
-------------------------------------------------------------
1054 MESSAGE **error** manager '!' currently used.
-------------------------------------------------------------
1055 MESSAGE it cannot be deleted
-------------------------------------------------------------
1056 MESSAGE **error** ldev is not yet configured
-------------------------------------------------------------
1057 MESSAGE **error** ldev is not a disc
-------------------------------------------------------------
1058 MESSAGE **error** ldev ! is configured as a system
volume.
-------------------------------------------------------------
1059 MESSAGE it cannot be deleted
-------------------------------------------------------------
1060 MESSAGE **error** ldev ! already exists
-------------------------------------------------------------
1061 MESSAGE **warning** ldev ! does not exist
-------------------------------------------------------------
1062 MESSAGE it must be replaced with a disc type device
-------------------------------------------------------------
1063 MESSAGE **error** iopath is currently referenced by a
configurated ldev
-------------------------------------------------------------
1064 MESSAGE it cannot be deleted
-------------------------------------------------------------
1065 MESSAGE **error** iopath ! is currently referenced by a
configurated ldev
-------------------------------------------------------------
1066 MESSAGE **error** ldev ! must be the system disc
-------------------------------------------------------------
1067 MESSAGE **error** ldev ! must be the system console
-------------------------------------------------------------
1069 MESSAGE **error** invalid mode parameter
-------------------------------------------------------------
1071 MESSAGE *error** iopath is already assigned
-------------------------------------------------------------
1072 MESSAGE **error** please specify an associated manager
-------------------------------------------------------------
1076 MESSAGE **error** iopath ! does not exist
-------------------------------------------------------------
1077 MESSAGE **error** can't delete system console
-------------------------------------------------------------
1078 MESSAGE **error** can't delete system disc
CAUSE You are attempting to delete the system disk
through the DDEV command by referencing its LDEV
number, product identification, or class. The
system volume (MASTER) cannot be deleted from the
configuration.
ACTION Reenter the command, if you want to delete a device
other than the system disk or another system volume
(MEMBERx), without referencing a configured disc's
LDEV, product identification, or class.
-------------------------------------------------------------
1079 MESSAGE **error** can't delete system tape drive
CAUSE You are attempting to delete the system tape drive
through DDEV command by referencing its LDEV
number, product identification, or class.
ACTION Reenter the command, if you want to delete a device
other than the system tape drive.
-------------------------------------------------------------