HP 3000 Manuals HP 3000 Manuals
(Subsystem 98)(Continued)
------------------------------------------------------------
125 MESSAGE The procedure ADD_VIRTUAL_LDEVS is unable to
SWITCH to CM.
CAUSE ADD_VIRTUAL_DEVICE could not be switched to CM.
-------------------------------------------------------------
126 MESSAGE The procedure CLEAN_CM_DEVICE_TABLES is unable to
SWITCH to CM.
CAUSE CLEAN_CM_DEVICE_TABLES could not SWITCH to CM.
-------------------------------------------------------------
127 MESSAGE The procedure INIT_CM_DEVICE_TABLES is unable to
SWITCH to CM.
CAUSE INIT_CM_DEVICE could not SWITCH to CM.
-------------------------------------------------------------
128 MESSAGE The procedure IO_INIT failed to initialize the
low level I/O system.
CAUSE The low level I/O system was not initialized.
-------------------------------------------------------------
450 MESSAGE Activation of JOBMAIN process failed.
-------------------------------------------------------------
451 MESSAGE Activation of SESSIONMAIN process failed.
-------------------------------------------------------------
452 MESSAGE Creation of JOBMAIN process failed.
-------------------------------------------------------------
453 MESSAGE Creation of JOBMAIN_PORT failed.
-------------------------------------------------------------
454 MESSAGE Creation of JOBQUEUE_PORT failed.
-------------------------------------------------------------
455 MESSAGE Creation of SESSIONMAIN process failed.
-------------------------------------------------------------
456 MESSAGE Creation of SESSIONMAIN_PORT process failed.
-------------------------------------------------------------
457 MESSAGE Opening JOBMAIN_PORT process failed.
-------------------------------------------------------------
458 MESSAGE Opening JOBQUE_PORT process failed.
-------------------------------------------------------------
459 MESSAGE Opening SESSIONMAIN_PORT process failed.
-------------------------------------------------------------
460 MESSAGE The information and subsystem escape is passed as
the second parameter.
-------------------------------------------------------------
461 MESSAGE Had an unexpected escape from the operating
system to the SESSIONMAIN outerblock. The
information and subsystem that escaped are passed
to the system abort as the second parameter.
-------------------------------------------------------------
462 MESSAGE Had an unexpected escape from the operating
system to the JSMAIN outerblock.
-------------------------------------------------------------
463 MESSAGE Port status is passed as the second parameter.
-------------------------------------------------------------
464 MESSAGE Port status is passed as the second parameter.
-------------------------------------------------------------
465 MESSAGE Port status is passed as the second parameter.
-------------------------------------------------------------
500 MESSAGE Management failed to post data from memory to
disk.
CAUSE DSM attempted to post 16 pages with the MAKE_ROC
option after a sequential read. The exact
conditions that caused an error to be returned are
unknown to the DSM.
-------------------------------------------------------------
501 MESSAGE During a file open, the GUFD semaphore could not
be initialized.
CAUSE A call to CB_INIT returned bad status.
-------------------------------------------------------------
502 MESSAGE During a file open, the FLOCK semaphore could not
be initialized.
CAUSE A call to CM_INIT returned bad status.
-------------------------------------------------------------
503 MESSAGE During a file open, the FOPEN semaphore could not
be initialized.
CAUSE A call to CB_INIT returned bad status.
-------------------------------------------------------------
504 MESSAGE Prefetch of needed data for a READ/WRITE request
could not be made.
CAUSE VSM reported address or range given to be invalid
or out of bounds.
-------------------------------------------------------------
505 MESSAGE Attempted to CLOSE a file which is not OPEN.
CAUSE File system lock algorithm failed.
-------------------------------------------------------------
506 MESSAGE The procedure could not open the system library
(the NL).
CAUSE Boot image or LABEL TABLE is corrupted.
ACTION Take a system dump and reinstall if necessary.
-------------------------------------------------------------
508 MESSAGE CREATE_OBJECT failed to create the SM KSO.
-------------------------------------------------------------
509 MESSAGE The procedure was unable to obtain the HASH TABLE
lock.
CAUSE CB_INIT returned bad status trying to initialize
the UFID HASH TABLE semaphore; start image is bad.
ACTION Recreate the boot image. Take a system dump and
call your support representative.
-------------------------------------------------------------
511 MESSAGE The procedure was unable to obtain the LRU lock.
CAUSE CB_INIT returned bad status trying to initialize
the LRV semaphore; start image is bad.
ACTION Recreate the boot image. Take a system dump and
call your support representative.
-------------------------------------------------------------
514 MESSAGE A pascal recover block was entered unexpectedly.
CAUSE Cause is usually associated with software or
hardware traps which have been tripped because of
invalid addresses, invalid access rights, or
arithmetic underflow/overflow.
-------------------------------------------------------------
551 MESSAGE Offset of entry is not within the LABEL TABLE.
CAUSE LABEL TABLE has been corrupted.
-------------------------------------------------------------
552 MESSAGE The entry referenced is not an extent block type.
CAUSE LABEL TABLE has been corrupted.
-------------------------------------------------------------
553 MESSAGE Extent block does not point to the correct PARENT
label.
CAUSE LABEL TABLE has been corrupted.
-------------------------------------------------------------
554 MESSAGE Two file offsets in the extent block are the
same.
CAUSE LABEL TABLE has been corrupted.
-------------------------------------------------------------
555 MESSAGE An extent block that is expected to be a free
entry is not free.
CAUSE LABEL TABLE has been corrupted.
-------------------------------------------------------------
556 MESSAGE A POST of a LABEL TABLE entry failed.
CAUSE MEMORY MANAGER failed to port a LABEL TABLE entry.
ACTION Reboot the system, and run FSCHECK to see if a
reinstall of the system is necessary.
-------------------------------------------------------------
557 MESSAGE The number of EXTENTS in the block exceeds the
maximum allowable.
CAUSE LABEL TABLE has been corrupted.
-------------------------------------------------------------
613 MESSAGE The file system encountered a trap.
CAUSE An operating system software error caused a trap.
-------------------------------------------------------------
614 MESSAGE The file system encountered an unexpected ESCAPE.
CAUSE An internal operating system module called ESCAPE
unexpectedly.
-------------------------------------------------------------
615 MESSAGE The file system was unable to release a resource.
CAUSE Due to an operating system software error, the file
system was not able to release one or more system
resources.
-------------------------------------------------------------
616 MESSAGE An error was encountered while creating
FILE SYSTEM GLOBAL AREA during file system
initialization.
-------------------------------------------------------------
617 MESSAGE An error was encountered while creating GPDP
TABLE during file system initialization.
-------------------------------------------------------------
618 MESSAGE An error was encountered while creating FILE OPEN
COUNT TABLE during file system initialization.
-------------------------------------------------------------
619 MESSAGE An error was encountered while creating BASIC IPC
(BIPC) TIMER server ports during file system
initialization.
-------------------------------------------------------------
620 MESSAGE An error was encountered while initializing
STORE/RESTORE LATENCY TABLE during file system
initialization.
-------------------------------------------------------------
621 MESSAGE An error occurred in the file system during
process termination.
CAUSE The file system detected an operating system
software error while cleaning up file system data
structures during process termination.
-------------------------------------------------------------
650 MESSAGE An internal STORAGE MANAGEMENT error was
encountered while attempting to CLOSE (FCLOSE) a
file.
CAUSE Due to an operating system software error STORAGE
MANAGEMENT was not able to CLOSE the file.
-------------------------------------------------------------
651 MESSAGE FCLOSE was not able to delete a file's access
rights entry from the FILE ACCESS RIGHTS TABLE.
CAUSE A file system error occurred during file OPEN or
the FILE ACCESS RIGHTS TABLE has been corrupted.
-------------------------------------------------------------
652 MESSAGE An error was encountered while attempting to
return an allocated GPDP to the free list while
trying to CLOSE (FCLOSE) a file.
CAUSE The GDPD TABLE has been corrupted.
-------------------------------------------------------------
653 MESSAGE The file system detected a counter underflow in a
GUFD.
CAUSE The GUFD has been corrupted.
-------------------------------------------------------------
654 MESSAGE The FILE ACCESS RIGHTS TABLE counters are
inconsistent.
CAUSE The FILE ACCESS RIGHTS TABLE has been corrupted.
-------------------------------------------------------------
655 MESSAGE The procedure can not decrement the PDISABLE
count; it is unexpectedly zero.
-------------------------------------------------------------
656 MESSAGE The CB was unlocked by a PIN different from the
PIN that locked it.
-------------------------------------------------------------
657 MESSAGE The VECTOR TABLE in the CB is corrupt.
-------------------------------------------------------------
658 MESSAGE Failure in creating File IO State Tables
CAUSE System failed to create one of the File IO State
Tables during system initialization.
ACTION Contact your Hewlett-Packard Representative.
-------------------------------------------------------------
659 MESSAGE Failure in creating one of the local socket
tables.
CAUSE System failed to create one of the local socket
tables during system initialization.
ACTION Contact your Hewlett-Packard Representative.
-------------------------------------------------------------