HP 3000 Manuals HP 3000 Manuals
(Uninterrupted Power Source) (Continued)
------------------------------------------------------------
583 MESSAGE UPS Monitor system call error: Error status !
(Subsystem # !, Error # !) received from procedure
Create_Object. (UPSERR 0583)
CAUSE This is a software-detected error condition that
indicates an error occurred in a call to the
specified MPE/iX Operating System procedure when
that procedure was called by the UPS Monitor
software.
ACTION Call your Hewlett-Packard service representative.
-------------------------------------------------------------
584 MESSAGE UPS Monitor system call error: Error status !
(Subsystem # !, Error # !) received from procedure
Create_Port. (UPSERR 0584)
CAUSE This is a software-detected error condition that
indicates an error occurred in a call to the
specified MPE/iX Operating System procedure when
that procedure was called by the UPS Monitor
software.
ACTION Call your Hewlett-Packard service representative.
-------------------------------------------------------------
585 MESSAGE UPS Monitor system call error: Error status !
(Subsystem # !, Error # !) received from procedure
Purge_Port. (UPSERR 0585)
CAUSE This is a software-detected error condition that
indicates an error occurred in a call to the
specified MPE/iX Operating System procedure when
that procedure was called by the UPS Monitor
software.
ACTION Call your Hewlett-Packard service representative.
-------------------------------------------------------------
586 MESSAGE UPS Monitor error: UPS Monitor was unable to
create its UPS Table object. The UPS Monitor
process can not operate without it, and is aborting
itself. (UPSERR 0586)
CAUSE This is a software-detected error condition that
indicates an error in the UPS Monitor software or
in some other system software, or a system memory
error.
ACTION Call your Hewlett-Packard service representative.
-------------------------------------------------------------
587 MESSAGE UPS Monitor UPS error: Unable to start monitoring
on UPS Ldev ! due to File System error in finding
or opening the device. (UPSWRN 0587)
CAUSE This is a software-detected error condition that
indicates an error in the UPS Monitor software or
in some other system software, or a system memory
error.
ACTION Call your Hewlett-Packard service representative.
-------------------------------------------------------------
588 MESSAGE UPS Monitor logic error: UPS Monitor has detected
that it has declared a UPS device to be "down", but
the status that tells the reason for the "down" is
invalid/undefined. (UPSERR 0588)
CAUSE This is a software-detected error condition that
indicates an error in the UPS Monitor software or
in some other system software, or a system memory
error.
ACTION Call your Hewlett-Packard service representative.
-------------------------------------------------------------
589 MESSAGE UPS LDEV ! initialization error: UPS Monitor was
unable to allocate (open) this UPS device. This UPS
device will not be monitored. (UPSERR 0589)
CAUSE This is a software-detected error condition that
indicates an error in the UPS Monitor software or
in some other system software, or a system memory
error.
ACTION Call your Hewlett-Packard service representative.
-------------------------------------------------------------
590 MESSAGE UPS Monitor error: UPS Monitor process
initialization failed due to error in obtaining
resources (data object, message port, etc.).
(UPSERR 0590)
CAUSE This is a software-detected error condition that
indicates an error in the UPS Monitor software or
in some other system software, or a system memory
error.
ACTION Call your Hewlett-Packard service representative.
-------------------------------------------------------------
591 MESSAGE UPS Monitor warning: UPS Monitor finds no UPS
devices configured in the system I/O configuration
files. UPS Monitor is terminating itself. (UPSWRN
0591)
CAUSE No UPSs have been configured in the system's I/O
configuration files. This is an error if this
system is supposed to have UPSs on it. This is not
an error if this system is not supposed to have UPS
devices on it.
ACTION If this system is supposed to have UPS devices on
it, then review and correct the system I/O
configuration, and then restart the system. If
this system is not supposed to have UPS devices on
it, then no action is needed.
-------------------------------------------------------------
592 MESSAGE UPS Monitor system call error: Error status !
(Subsystem # !, Error # !) received from procedure
Get_Ups_Devices_Count. (UPSERR 0592)
CAUSE This is a software-detected error condition that
indicates an error occurred in a call to the
specified MPE/iX Operating System procedure when
that procedure was called by the UPS Monitor
software.
ACTION Call your Hewlett-Packard service representative.
-------------------------------------------------------------
593 MESSAGE UPS LDEV ! initialization error: UPS Monitor was
unable to locate this UPS LDEV via the File
System's "Device Files" facility. (UPSERR 0593)
CAUSE This is a software-detected error condition that
indicates an error in the UPS Monitor software or
in some other system software, or a system memory
error.
ACTION Call your Hewlett-Packard service representative.
-------------------------------------------------------------
594 MESSAGE UPS Monitor logic error: Attempted to do status
character mapping (table lookup) of an
unknown/undefined UPS status character. (UPSERR
0594
CAUSE This is a software-detected error condition that
indicates an error in the UPS Monitor software or
in some other system software, or a system memory
error.
ACTION Call your Hewlett-Packard service representative.
-------------------------------------------------------------
595 MESSAGE UPS Monitor information: UPS Monitor process has
been launched by PROGEN and is starting-up its
operation. (UPSWRN 0595)
CAUSE The system has just been started-up, and the UPS
Monitor software subsystem has automatically been
started as well.
ACTION No action is needed. This is merely an
informational message confirming that the UPS
Monitor software has been started.
-------------------------------------------------------------
596 MESSAGE UPS Monitor information: UPS Monitor process has
initialized itself successfully, and is ready to
start UPS monitoring operations. (UPSWRN 0596)
CAUSE After the UPS Monitor process was first started, it
successfully initialized itself: it acquired the
basic resources it needed to commence operations.
ACTION No action is needed. This is merely an
informational message that confirms that the UPS
Monitor completed its process initialization
successfully.
-------------------------------------------------------------
597 MESSAGE UPS Monitor information: UPS Monitor process is
shutting down, due to a normal system shutdown.
(UPSWRN 0597)
CAUSE The system operator initiated a normal Control-A
Shutdown of the MPE/iX system. The UPS Monitor is
shutting itself down as part of the overall system
shutdown.
ACTION No action is needed. This is merely an
informational message that confirms that the UPS
Monitor is shutting down due to a normal system
shutdown.
-------------------------------------------------------------
598 MESSAGE UPS Monitor system call error: Error status !
(Subsystem # !, Error # !) received from procedure
Get_Ups_Devices_List. (UPSERR 0598)
CAUSE This is a software-detected error condition that
indicates an error occurred in a call to the
specified MPE/iX Operating System procedure when
that procedure was called by the UPS Monitor
software.
ACTION Call your Hewlett-Packard service representative.
-------------------------------------------------------------
599 MESSAGE UPS Monitor warning: UPS Monitor process is
shutting down and restarting itself due to an
internal error condition. (UPSWRN 0599)
CAUSE The UPS Monitor detected an error condition
internal to its software, and is attempting to
recover by restarting itself from the beginning of
its process.
ACTION If this warning appears only rarely, then no action
is needed. If it appears frequently, then call
your Hewlett-Packard service representative.
-------------------------------------------------------------
600 MESSAGE UPS Monitor error: UPS Monitor process is
shutting down, due to an unrecoverable internal
error condition. (UPSERR 0600)
CAUSE The UPS Monitor software detected an error
condition within its processing from which it can
not recover. Accordingly, it is shutting itself
down, ending the UPS monitoring processing.
ACTION This should rarely, if ever, happen in practice.
You can re-boot the system to see if the UPS
Monitor will run successfully after a new startup
of the system. If the problem persists, call your
Hewlett-Packard service representative.
-------------------------------------------------------------
601 MESSAGE UPS Monitor logic error: UPS Monitor process
unable to obtain list of UPS LDEVS from HLIO after
successfully obtaining number of UPS devices from
HLIO. (UPSERR 0601)
CAUSE This is a software-detected error condition that
indicates an error in the UPS Monitor software or
in some other system software, or a system memory
error.
ACTION Call your Hewlett-Packard service representative.
-------------------------------------------------------------
602 MESSAGE UPS Monitor information: UPS Monitor process
startup of UPS devices failed, due to inability to
get UPS devices' allocation information from the
system. (UPSERR 0602)
CAUSE This is a software-detected error condition that
indicates an error in the UPS Monitor software or
in some other system software, or a system memory
error.
ACTION Call your Hewlett-Packard service representative.
-------------------------------------------------------------