HP 3000 Manuals HP 3000 Manuals
(TDSM) (contd.)
---------------------------------------------------------------
280 MESSAGE Dump failed. Open of DTCM failed, or DTC owned
and not overridden (TDSM 280)
CAUSE This message is written to dump files, and never
appears as an error message to a user terminal. If
the user was informed the DTC was in use by another
TermDSM (see message 35), and the second user chose
NOT to override, then this message is normal and is
not cause for alarm. Otherwise, it is indicative
of an internal error.
ACTION If the problem persists, take another dump. If you
are sure another user was not involved, contact
your HP support representative.
---------------------------------------------------------------
281 MESSAGE Dump failed: Send or Receive of dump request
failed. (TDSM 281)
CAUSE An internal error. This message is written to dump
files and never appears as an error message to a
user.
ACTION Contact your HP support representative.
---------------------------------------------------------------
282 MESSAGE Dump failed: Bad function in internal error reply
to dump request.(TDSM 282)
CAUSE An internal error. This message is written to dump
files and never appears as an error message to a
user.
ACTION Contact your HP support representative.
---------------------------------------------------------------
283 MESSAGE Dump failed. Bad reply (llio) status from DTCM.
(TDSM 283)
CAUSE Internal error.
ACTION Contact your HP support representative.
---------------------------------------------------------------
290 MESSAGE Sorry, TermDSM does not provide services for the
console. (TDSM 290)
CAUSE The user entered the ldev number of the physical
console for a reset or dump. TermDSM cannot act
upon the physical console port because it is not on
the DTC. TermDSM can only operate on ldev numbers
and ports that are on the DTC. Note: The
discussion here is for the physical console, not a
terminal which has taken control of the logical
console via the CONSOLE command.
ACTION Contact your HP support representative.
---------------------------------------------------------------
300 MESSAGE IPC message received in wrong subque. (TDSM 300)
CAUSE Internal error.
ACTION Contact your HP support representative.
---------------------------------------------------------------
301 MESSAGE DTCM port data area not initialized. (TDSM 301)
CAUSE Internal error.
ACTION Contact your HP support representative.
---------------------------------------------------------------
302 MESSAGE Bad machine type found in RMP packet. (TDSM 302)
CAUSE Internal error.
ACTION Contact your HP support representative.
---------------------------------------------------------------
303 MESSAGE Non supported download file type found in RMP
packet. (TDSM 303)
CAUSE Internal error.
ACTION Contact your HP support representative.
---------------------------------------------------------------
304 MESSAGE Bad source IEEE 802.3 address found in RMP
packet. (TDSM 304)
CAUSE Internal error.
ACTION Contact your HP support representative.
---------------------------------------------------------------
305 MESSAGE Bad session ID found in RMP packet. (TDSM 305)
CAUSE Internal error.
ACTION Contact your HP support representative.
---------------------------------------------------------------
306 MESSAGE Bad path id received from NDM. (TDSM 306)
CAUSE Internal error.
ACTION Contact your HP support representative.
---------------------------------------------------------------
307 MESSAGE Boot (download) complete message received before
expected. (TDSM 307)
CAUSE It has finished the download of its operating
firmware before the DTCM expected it.
ACTION Look on the console for a boot complete message.
Otherwise, enter the command again. If the problem
persists, contact your HP support representative.
---------------------------------------------------------------
308 MESSAGE IO-get-frame failed. (TDSM 308)
CAUSE Internal error.
ACTION Contact your HP support representative.
---------------------------------------------------------------
309 MESSAGE Unimplemented action called. (TDSM 309)
CAUSE Internal error.
ACTION Contact your HP support representative.
---------------------------------------------------------------
310 MESSAGE Bad download file type. (TDSM 310)
CAUSE Possible corrupt download file.
ACTION Contact your HP support representative.
---------------------------------------------------------------
311 MESSAGE Bad reply from memory manager for Aux data area.
(TDSM 311)
CAUSE Internal error.
ACTION Contact your HP support representative.
---------------------------------------------------------------
312 MESSAGE DCC sent bad reply in response to config. data
request. (TDSM 312)
CAUSE Internal error.
ACTION Contact your HP support representative.
---------------------------------------------------------------
313 MESSAGE DTC did not request the configuration to be
download. (TDSM 313)
CAUSE After a download, the DTC did not request its
configuration.
ACTION Look at the console for a message saying
configuration complete. Otherwise, enter the
command again. If the problem persists, contact
your HP support representative.
---------------------------------------------------------------
314 MESSAGE DCC did not reply to configuration data request.
(TDSM 314)
CAUSE Internal error.
ACTION Contact your HP support representative.
---------------------------------------------------------------
315 MESSAGE Unexpected RMP packet received. (TDSM 315)
CAUSE Internal error.
ACTION Contact your HP support representative.
---------------------------------------------------------------
316 MESSAGE DTC unexpectedly requested configuration
information to be downloaded. (TDSM 316)
CAUSE Internal error. The DTC requested its
configuration information at a time the DTCM did
not expect it.
ACTION Monitor the console for messages saying the
configuration is complete. Otherwise, enter the
command again. If the problem persists, contact
your HP support representative.
ACTION Contact your HP support representative.
---------------------------------------------------------------