HP 3000 Manuals HP 3000 Manuals
(Subsystem 122) (contd)
---------------------------------------------------------------
500 MESSAGE The specified address does not point to a message
pool.
CAUSE Same as message content.
ACTION Take a system dump and call your Hewlett-Packard
Representative.
---------------------------------------------------------------
535 MESSAGE Either an illegal fixed port number was specified
when creating a port, or the port number is not
valid (i.e., never created or already returned),
but specified for one of the other port access
primitives.
CAUSE Same as message content.
ACTION Take a system dump and call your Hewlett-Packard
Representative.
---------------------------------------------------------------
537 MESSAGE An error was encountered when performing a port
directory look-up. The port directory entry for the
specified name is not valid.
CAUSE Same as message content.
ACTION Take a system dump and call your Hewlett-Packard
Representative.
---------------------------------------------------------------
540 MESSAGE The specified port type is invalid, or the access
is inconsistent with the port's type.
CAUSE Same as message content.
ACTION Take a system dump and call your Hewlett-Packard
Representative.
---------------------------------------------------------------
560 MESSAGE The specified server type is invalid, or the
access is inconsistent with the port's type of
server.
CAUSE Same as message content.
ACTION Take a system dump and call your Hewlett-Packard
Representative.
---------------------------------------------------------------
580 MESSAGE Invalid or inconsistent specification in the
"SERVER_DESC" parameter to CREATE_PORT.
CAUSE Same as message content.
ACTION Take a system dump and call your Hewlett-Packard
Representative.
---------------------------------------------------------------
590 MESSAGE An error was encountered from FINDLOCALITY. This
routine is called during port creation for a port
whose procedure server will execute on the ICS, but
whose server code is not memory-resident.
CAUSE Same as message content.
ACTION Take a system dump and call your Hewlett-Packard
Representative.
---------------------------------------------------------------
600 MESSAGE Either the maximum number of possible subqueues
has been exceeded, or the subqueue specified
exceeds the maximum configured for the specified
port.
CAUSE Same as message content.
ACTION Take a system dump and call your Hewlett-Packard
Representative.
---------------------------------------------------------------
605 MESSAGE The specified info. item is not available to
access while on the ICS.
CAUSE Same as message content.
ACTION Take a system dump and call your Hewlett-Packard
Representative.
---------------------------------------------------------------
610 MESSAGE It is illegal to access a port via a local port
number while on the ICS.
CAUSE Same as message content.
ACTION Take a system dump and call your Hewlett-Packard
Representative.
---------------------------------------------------------------
620 MESSAGE The process interrupt level being accessed in not
available to the caller since it exceeds the
caller's execution ring level.
CAUSE Same as message content.
ACTION Take a system dump and call your Hewlett-Packard
Representative.
---------------------------------------------------------------
630 MESSAGE When creating a non-resident PORT/POOL that is
also ICS_SENDABLE, the message size for the pool is
greater than what the port facility could handle if
the message had to be delayed.
CAUSE Same as message content.
ACTION Take a system dump and call your Hewlett-Packard
Representative.
---------------------------------------------------------------
650 MESSAGE The specified port server's PFP priority is not
within the valid range of - 0..30.
CAUSE Same as message content.
ACTION Take a system dump and call your Hewlett-Packard
Representative.
---------------------------------------------------------------
651 MESSAGE The specified ICS priority for an ICS_EXECUTABLE
server is not within the valid range - 0..31.
CAUSE Same as message content.
ACTION Take a system dump and call your Hewlett-Packard
Representative.
---------------------------------------------------------------
680 MESSAGE The number of subqueues requested to configure
for the new port is not valid; must be between 1
and 32.
CAUSE Same as message content.
ACTION Take a system dump and call your Hewlett-Packard
Representative.
---------------------------------------------------------------
710 MESSAGE The procedure specified a message frame access to
a port that is illegal to use frames with (i.e.,
the port is not a message port).
CAUSE Same as message content.
ACTION Take a system dump and call your Hewlett-Packard
Representative.
---------------------------------------------------------------
720 MESSAGE A message at the specified subqueue location was
not found on an enabled subqueue.
CAUSE Same as message content.
ACTION Take a system dump and call your Hewlett-Packard
Representative.
---------------------------------------------------------------
730 MESSAGE No message was found on the specified port that
matched the specified pattern (and search
conditions).
CAUSE Same as message content.
ACTION Take a system dump and call your Hewlett-Packard
Representative.
---------------------------------------------------------------
750 MESSAGE The message length specified for a SEND PRIMITIVE
exceeds the maximum length for its message pool, or
the length specified for a CAUSE_PROCESS_INTERRUPT
message exceeds the maximum.
CAUSE Same as message content.
ACTION Take a system dump and call your Hewlett-Packard
Representative.
---------------------------------------------------------------
760 MESSAGE The message length specified to
either a SEND/RECEIVE PRIMITIVE or to
CAUSE_PROCESS_INTERRUPT must be a positive number
of bytes.
CAUSE Same as message content.
ACTION Take a system dump and call your Hewlett-Packard
Representative.
---------------------------------------------------------------
770 MESSAGE The procedure attempted to send a non-zero length
message, but the pointer to the message is nil.
CAUSE Same as message content.
ACTION Take a system dump and call your Hewlett-Packard
Representative.
---------------------------------------------------------------
775 MESSAGE The procedure requested to use a reserved message
frame, but none were ever reserved.
CAUSE Same as message content.
ACTION Take a system dump and call your Hewlett-Packard
Representative.
---------------------------------------------------------------
776 MESSAGE The procedure requested to use a reserved message
frame, but there are no reserved frames currently
available (i.e., the reserved list is currently
empty).
CAUSE Same as message content.
ACTION Take a system dump and call your Hewlett-Packard
Representative.
---------------------------------------------------------------
778 MESSAGE The mode for the specified process interrupt
handler is not valid; must be either NM or CM.
CAUSE Same as message content.
ACTION Take a system dump and call your Hewlett-Packard
Representative.
---------------------------------------------------------------
779 MESSAGE The procedure attempted to delete pending process
interrupts for the calling process, but no process
interrupts of the requested type were found to
delete.
CAUSE Same as message content.
ACTION Take a system dump and call your Hewlett-Packard
Representative.
---------------------------------------------------------------
780 MESSAGE The procedure attempted to enable a port (with a
process server) to notify the server via a process
interrupt, but the PLABEL for the process interrupt
handler has not been defined yet.
CAUSE Same as message content.
ACTION Take a system dump and call your Hewlett-Packard
Representative.
---------------------------------------------------------------
785 MESSAGE An error was detected when trying to block the
calling process onto the specified wait queue.
CAUSE Same as message content.
ACTION Take a system dump and call your Hewlett-Packard
Representative.
---------------------------------------------------------------
790 MESSAGE The procedure attempted to access a port with an
invalid port number (i.e., the port for the port
number was never defined, or already purged, or not
within the legal range of possible port numbers).
CAUSE Same as message content.
ACTION Take a system dump and call your Hewlett-Packard
Representative.
---------------------------------------------------------------
791 MESSAGE The procedure attempted to convert a local port
number for the specified PIN into its equivalent
global port number; either the PIN is invalid, or
the procedure currently does not have that local
port number defined.
CAUSE Same as message content.
ACTION Take a system dump and call your Hewlett-Packard
Representative.
---------------------------------------------------------------
824 MESSAGE The procedure attempted to UNFREEZE (via
PORT_CONTROL) a port that was not previously
frozen.
CAUSE Same as message content.
ACTION Take a system dump and call your Hewlett-Packard
Representative.
---------------------------------------------------------------
825 MESSAGE The procedure attempted to CREATE a port with
ICS_ACCESSIBLE option and associate it with a
message pool that does not have that option.
CAUSE Same as message content.
ACTION Take a system dump and call your Hewlett-Packard
Representative.
---------------------------------------------------------------
826 MESSAGE The procedure returned an internal error when
deleting a delayed message for a port (via
DELETE_DELAYED_MSG).
CAUSE Same as message content.
ACTION Take a system dump and call your Hewlett-Packard
Representative.
---------------------------------------------------------------
827 MESSAGE The procedure returned an internal error when
trying to delete a delayed message for a port (via
DELETE_DELAYED_MSG).
CAUSE Same as message content.
ACTION Take a system dump and call your Hewlett-Packard
Representative.
---------------------------------------------------------------
828 MESSAGE An attempt to delete delayed messages for a port
while on the ICS.
CAUSE Same as message content.
ACTION Take a system dump and call your Hewlett-Packard
Representative.
---------------------------------------------------------------
830 MESSAGE An attempt to create a port with ICS_SENDABLE
option and associate it with a message pool that
does not have that option.
CAUSE Same as message content.
ACTION Take a system dump and call your Hewlett-Packard
Representative.
---------------------------------------------------------------
834 MESSAGE An attempt to create a port with ICS_ACCESSIBLE
option without MEMORY_RESIDENT option.
CAUSE Same as message content.
ACTION Take a system dump and call your Hewlett-Packard
Representative.
---------------------------------------------------------------
835 MESSAGE An attempt to create a port with MEMORY_RESIDENT
option and associate it with a message pool that
does not have the option.
CAUSE Same as message content.
ACTION Take a system dump and call your Hewlett-Packard
Representative.
---------------------------------------------------------------
836 MESSAGE An attempt to change a port's auxiliary data
area(s) while the port is currently frozen.
CAUSE Same as message content.
ACTION Take a system dump and call your Hewlett-Packard
Representative.
---------------------------------------------------------------
840 MESSAGE An attempt to create a port with a name that has
already been used for another port.
CAUSE Same as message content.
ACTION Take a system dump and call your Hewlett-Packard
Representative.
---------------------------------------------------------------
841 MESSAGE An attempt to open a named port, but the name has
not been defined in the port directory (i.e., not
created yet).
CAUSE Same as message content.
ACTION Take a system dump and call your Hewlett-Packard
Representative.
---------------------------------------------------------------
850 MESSAGE An attempt to perform a receive primitive on a
port when caller is not the port's server, or an
attempt to purge a port when the caller is not the
port owner, or an attempt to give/release ownership
when not the port owner.
CAUSE Same as message content.
ACTION Take a system dump and call your Hewlett-Packard
Representative.
---------------------------------------------------------------
851 MESSAGE An error was encountered from the symbol TABLE
MANAGEMENT routines when accessing the port
directory.
CAUSE Same as message content.
ACTION Take a system dump and call your Hewlett-Packard
Representative.
---------------------------------------------------------------
855 MESSAGE An attempt to open a port; the port was created
with exclusive access, or the caller requested
exclusive access and another process already opened
it, or an attempt to add exclusive access (via
PORT_CONTROL) when others have it opened.
CAUSE Same as message content.
ACTION Take a system dump and call your Hewlett-Packard
Representative.
---------------------------------------------------------------
856 MESSAGE An attempt to access a port, but there is a purge
pending (i.e., a PURGE_PORT been requested for the
specified port).
CAUSE Same as message content.
ACTION Take a system dump and call your Hewlett-Packard
Representative.
---------------------------------------------------------------
880 MESSAGE An attempt to release a semaphore port that the
caller does not own.
CAUSE Same as message content.
ACTION Take a system dump and call your Hewlett-Packard
Representative.
---------------------------------------------------------------
885 MESSAGE An attempt to use a SEND primitive specifying
RESERVRD_FRAME option, and the address of the send
buffer is already a message frame.
CAUSE Same as message content.
ACTION Take a system dump and call your Hewlett-Packard
Representative.
---------------------------------------------------------------
890 MESSAGE An attempt to perform a NON-SEND port primitive
to a port that is not legal to access while on the
ICS (i.e., is not resident).
CAUSE Same as message content.
ACTION Take a system dump and call your Hewlett-Packard
Representative.
---------------------------------------------------------------
900 MESSAGE An attempt to acquire a ranked semaphore port
that is lower rank than the process currently holds
(i.e., acquiring ranked semaphore ports out of
order).
CAUSE Same as message content.
ACTION Take a system dump and call your Hewlett-Packard
Representative.
---------------------------------------------------------------
905 MESSAGE An attempt to acquire a semaphore port that has
been marked as unavailable (via PORT_CONTROL).
CAUSE Same as message content.
ACTION Take a system dump and call your Hewlett-Packard
Representative.
---------------------------------------------------------------
910 MESSAGE An attempt to acquire a semaphore port that is
owned by another process, and the caller did not
wish to wait.
CAUSE Same as message content.
ACTION Take a system dump and call your Hewlett-Packard
Representative.
---------------------------------------------------------------
915 MESSAGE The previous owner(s) of a semaphore port
terminated while still the owner. The current call
to acquire the semaphore port was successful; just
a warning that previous owner(s) were not tidy.
CAUSE Same as message content.
ACTION Take a system dump and call your Hewlett-Packard
Representative.
---------------------------------------------------------------
920 MESSAGE An attempt to access a semaphore port while on
the ICS.
CAUSE Same as message content.
ACTION Take a system dump and call your Hewlett-Packard
Representative.
---------------------------------------------------------------
950 MESSAGE An attempt to acquire a semaphore port with
shared access, but the semaphore port was not
configured to allow shared access.
CAUSE Same as message content.
ACTION Take a system dump and call your Hewlett-Packard
Representative.
---------------------------------------------------------------
960 MESSAGE An attempt to acquire a semaphore port with
shared access, but the caller used a global port
number; must use a local port number to
successfully acquired shared access to a semaphore
port.
CAUSE Same as message content.
ACTION Take a system dump and call your Hewlett-Packard
Representative.
---------------------------------------------------------------
990 MESSAGE A process blocked on a port WAIT (via a receive
port primitive) and requested to be notified if a
process interrupt occurred before the block was
satisfied. Signifies that the process interrupt
occurred first; receive not satisfied.
CAUSE Same as message content.
ACTION Take a system dump and call your Hewlett-Packard
Representative.
---------------------------------------------------------------
1000 MESSAGE An unexplained AWAKE of the calling process from
the WAIT queue has occurred.
CAUSE Same as message content.
ACTION Take a system dump and call your Hewlett-Packard
Representative.
---------------------------------------------------------------
1010 MESSAGE The port primitive has not completed due to the
specified time out occurring first.
CAUSE Same as message content.
ACTION Take a system dump and call your Hewlett-Packard
Representative.
---------------------------------------------------------------
1020 MESSAGE A nil pointer was used as a pointer to a message
pool.
CAUSE Same as message content.
ACTION Take a system dump and call your Hewlett-Packard
Representative.
---------------------------------------------------------------
1030 MESSAGE Only local port numbers are expected to be passed
to this port primitive.
CAUSE Same as message content.
ACTION Take a system dump and call your Hewlett-Packard
Representative.
---------------------------------------------------------------
1040 MESSAGE The port number passed into a port primitive was
the nil port number. The only primitive that
accepts this value is SEND_MSG.
CAUSE Same as message content.
ACTION Take a system dump and call your Hewlett-Packard
Representative.
---------------------------------------------------------------
1050 MESSAGE The specified class for the semaphore to be
initialized is not within the valid range.
CAUSE Same as message content.
ACTION Take a system dump and call your Hewlett-Packard
Representative.
---------------------------------------------------------------
1051 MESSAGE The type of semaphore specified for this
semaphore record initialization is not within the
valid range.
CAUSE Same as message content.
ACTION Take a system dump and call your Hewlett-Packard
Representative.
---------------------------------------------------------------
1060 MESSAGE The procedure attempted to AWAKEN a process from
waiting on its standard signal port (via
IPC_WAIT_PROCESS), but the process was not
currently waiting on its standard signal port; the
AWAKE was sent anyway.
CAUSE Same as message content.
ACTION Take a system dump and call your Hewlett-Packard
Representative.
---------------------------------------------------------------
1061 MESSAGE The procedure attempted to AWAKEN a process from
blocking on its standard signal port, but the
process was not waiting on the event(s) specified;
process was blocked for a different event on the
signal port; AWAKE was sent anyway.
CAUSE Same as message content.
ACTION Take a system dump and call your Hewlett-Packard
Representative.
---------------------------------------------------------------