HP 3000 Manuals HP 3000 Manuals
Chapter 34 Threshold Manager
(THMGERR)
--------------------------------------------------------------
The following are the error messages for Threshold Manager.
1 MESSAGE An invalid resource was specified. (THMGRERR 1)
CAUSE The resource name specified is not recognized as a
valid resource.
ACTION Check the spelling of the resource specified or
execute a SHOW command to get a list of the
resources recognized by this utility.
---------------------------------------------------------------
2 MESSAGE Invalid control option or name was specified.
(THMGRERR 2)
CAUSE The control value parameter is not a valid control
option or a recognizable control name.
ACTION Check the value of the option specified.
---------------------------------------------------------------
3 MESSAGE Threshold Manager function is invalid. (THMGRERR
3)
CAUSE The function passed to THMGRRES.PUB.SYS is invalid.
ACTION Restore a backup copy of the THMGRRES.PUB.SYS file.
---------------------------------------------------------------
4 MESSAGE Threshold Manager control procedure invalid.
(THMGRERR 4)
CAUSE The control passed to THMGRCTL.PUB.SYS is invalid.
ACTION Restore a backup copy of the THMGRCTL.PUB.SYS file.
---------------------------------------------------------------
5 MESSAGE Resource name does not match an internal table
resource. (THMGRERR 5)
CAUSE Internal error. It is possible that the file
THMGRRES.PUB.SYS has become corrupted.
ACTION Restore a backup copy of the THMGRRES.PUB.SYS file.
---------------------------------------------------------------
6 MESSAGE Control option does not match an internal table
control. (THMGRERR 6)
CAUSE Internal error. It is possible that the file
THMGRCTL.PUB.SYS has become corrupted.
ACTION Restore a backup copy of the THMGRCTL.PUB.SYS file.
---------------------------------------------------------------
7 MESSAGE Information provided with resource does not
match. (THMGRERR 7)
CAUSE Internal error. It is possible that the file
THMGRRES.PUB.SYS has become corrupted.
ACTION Restore a backup copy of the THMGRRES.PUB.SYS file.
---------------------------------------------------------------
8 MESSAGE Control information does not match resource.
(THMGRERR 8)
CAUSE Internal error. It is possible that the file
THMGRCTL.PUB.SYS has become corrupted.
ACTION Restore a backup copy of the THMGRCTL.PUB.SYS file
---------------------------------------------------------------
9 MESSAGE Communication error with Threshold Manager.
(THMGRERR 9)
CAUSE A communication error occurred with the Threshold
Manager.
ACTION Exit the program and restart the application.
---------------------------------------------------------------
10 MESSAGE Duplicate threshold information. (THMGRERR 10)
CAUSE The threshold value specified is already part of
the current configuration for this resource.
ACTION Check the current configuration for this resource,
and enter the correct threshold value.
---------------------------------------------------------------
11 MESSAGE The number of thresholds is at maximum capacity.
(THMGRERR 11)
CAUSE Internal error. The table which holds the
thresholds is at maximum capacity.
ACTION Delete the unnecessary thresholds and try again.
---------------------------------------------------------------
12 MESSAGE Threshold does not exist. (THMGRERR 12)
CAUSE The threshold value supplied for this resource is
non-existent.
ACTION Check the current configuration of this resource by
using the SHOW command and enter the correct
threshold value.
---------------------------------------------------------------
13 MESSAGE Threshold Manager encountered an unknown
error. (THMGRERR13)
CAUSE A trap has been detected from another external
procedure.
ACTION None
---------------------------------------------------------------
14 MESSAGE Creation of the Threshold Manager process failed.
(THMGRERR 14)
CAUSE Creation of the Threshold Manager process failed
during the program initialization.
ACTION Exit the program and restart the application.
---------------------------------------------------------------
16 MESSAGE Threshold Manager process is not active.
(THMGRERR 16)
CAUSE The Threshold Manager process failed during program
initialization.
ACTION Exit the program and restart the application.
---------------------------------------------------------------
17 MESSAGE The new control option is invalid. (THMGRERR 17)
CAUSE Internal error. It is possible that the file
THMGRCTL.PUB.SYS has become corrupted.
ACTION Restore a backup copy of the THMGRCTL.PUB.SYS file.
---------------------------------------------------------------
18 MESSAGE Invalid threshold value was specified. (THMGRERR
18)
CAUSE The threshold value provided with this resource
does not match the previously configured threshold
value.
ACTION Check the current configuration of this resource by
using the SHOW command and enter the correct
threshold value.
---------------------------------------------------------------
19 MESSAGE Invalid frequency was specified. (THMGRERR 19)
CAUSE The time interval specified is not valid.
ACTION Enter the command again with a valid time interval
between 25 and 3600 seconds.
---------------------------------------------------------------
52 MESSAGE Request for enabling a resource has been denied.
(THMGRERR 52)
CAUSE The resource information on internal tables was
found to be incomplete or inconsistent. There
could be data corruption.
ACTION Delete all the thresholds for this resource and
reconfigure.
---------------------------------------------------------------
53 MESSAGE Threshold Manager process is dead. (THMGRERR 53)
CAUSE The Threshold Manager process aborted for some
unknown reason.
ACTION Exit the program and restart the application.
---------------------------------------------------------------
101 MESSAGE Bad procedure label encountered while monitoring
the usage-level of resource "!". (THMGRERR 101)
CAUSE Threshold Manager internal error. Note that the
resource name may not be the same in all
occurrances of this error.
ACTION Disable Threshold Manager and restart.
---------------------------------------------------------------
102 MESSAGE Bad procedure label encountered while executing
the jumpoff procedure for control. (THMGRERR 102)
CAUSE Threshold Manager internal error.
ACTION Disable Threshold Manager and restart.
---------------------------------------------------------------
103 MESSAGE Bad procedure label encountered while executing
the fallback procedure for control. (THMGRERR 103)
CAUSE Threshold Manager internal error.
ACTION Disable Threshold Manager and restart.
---------------------------------------------------------------
104 MESSAGE Failed while sending a message to port!.
(THMGRERR 104)
CAUSE Threshold Manager internal error.
ACTION Disable Threshold Manager and restart.
---------------------------------------------------------------
105 MESSAGE Failed while receiving a message from port !.
(THMGRERR 105)
CAUSE Threshold Manager internal error.
ACTION Disable Threshold Manager and restart.
---------------------------------------------------------------
106 MESSAGE Failed to create port !. (THMGRERR 106)
CAUSE Threshold Manager internal error.
ACTION Disable Threshold Manager and restart.
---------------------------------------------------------------
107 MESSAGE Encountered a trap. (THMGRERR 107)
CAUSE Threshold Manager internal error.
ACTION Disable Threshold Manager and restart.
---------------------------------------------------------------
108 MESSAGE Encountered error during dynamic call of the
usage-monitoring procedure for resource. (THMGRERR
108)
CAUSE Threshold Manager internal error occurred during a
dynamic call to a procedure.
ACTION Disable Threshold Manager and restart.
---------------------------------------------------------------
109 MESSAGE Encountered error during dynamic call of the jump
off procedure for control. (THMGRERR 109)
CAUSE Threshold Manager internal error occurred during a
dynamic call to a procedure.
ACTION Disable Threshold Manager and restart.
---------------------------------------------------------------
110 MESSAGE Encountered error during dynamic call of the fall
back procedure for control. (THMGRERR 110)
CAUSE Threshold Manager internal error occurred during a
dynamic call to a procedure.
ACTION Disable Threshold Manager and restart.
---------------------------------------------------------------
111 MESSAGE My adoption by progen failed. (THMGRERR 111)
CAUSE Threshold Manager internal error.
ACTION Disable Threshold Manager and restart.
---------------------------------------------------------------
112 MESSAGE Initialization of internal tables failed.
(THMGRERR 112)
CAUSE Threshold Manager internal error.
ACTION Disable Threshold Manager and restart.
---------------------------------------------------------------
113 MESSAGE Encountered bad jumpoff count for control "!".
(THMGRERR 113)
CAUSE Threshold Manager internal error.
ACTION Disable Threshold Manager and restart.
---------------------------------------------------------------
118 MESSAGE Invalid table header or not a table header
corresponding to resource "!". (THMGRERR 118)
CAUSE Threshold Manager internal error.
ACTION Disable Threshold Manager and restart.
---------------------------------------------------------------
119 MESSAGE Unauthorized attempt to create the manager.
(THMGRERR 119)
CAUSE Threshold Manager internal error.
ACTION Disable Threshold Manager and restart.
---------------------------------------------------------------
201 MESSAGE The resource name specified is not valid.
(THMGRERR 201)
CAUSE The resource name is not one of the resource names
recognized by this utility.
ACTION Enter a resource name recognized by this utility.
To see a list of valid resource names use the SHOW
command.
---------------------------------------------------------------
202 MESSAGE No additional THRESHOLDS may be set for this
resource. (THMGRERR 202)
CAUSE An attempt was made to add more than the allowable
number of threshold values to a particular
resource.
ACTION Either modify one of the existing thresholds or
delete it and add a new threshold for this
resource.
---------------------------------------------------------------
203 MESSAGE Non-existent threshold value for a valid
resource. (THMGRERR 203)
CAUSE A non-existent threshold value was specified for a
valid resource.
ACTION Enter the correct threshold value for this
resource. Use the SHOW command to see what the
current values are for any resource.
---------------------------------------------------------------
204 MESSAGE The threshold value should be between 1 and 100.
(THMGRERR 204)
CAUSE A threshold value greater than 100 or less than 1
was entered.
ACTION Enter a threshold value between 1 and 100.
---------------------------------------------------------------
207 MESSAGE Threshold Manager must be ENABLED for this
command. (THMGRERR 207)
CAUSE An attempt was made to execute a command that
requires the Threshold Manager process to be
enabled.
ACTION Enable the Threshold Manager using the
ENABLEMANAGER command.
---------------------------------------------------------------
208 MESSAGE An invalid control option was specified.
(THMGRERR 208)
CAUSE An invalid control option value was specified with
this command.
ACTION Enter the command again with a valid control value.
---------------------------------------------------------------
209 MESSAGE An invalid notification option was
specified. (THMGRERR 209)
CAUSE An invalid value for a notification option was
entered.
ACTION Enter the command again with a valid notification
value.
---------------------------------------------------------------
212 MESSAGE Cannot enter duplicate threshold values for
a resource. (THMGRERR 212)
CAUSE The threshold value entered is the same as a
currently configured threshold for this resource.
ACTION Check to make sure the resource is correct, then
either modify the current value or delete it and
add it again.
---------------------------------------------------------------
300 MESSAGE Subsys !, Info: ! (THMGRERR 300)
CAUSE Unexpected error occurred, subsystem and subsystem
error displayed.
ACTION None. HP internal support required to rectify this
problem.
---------------------------------------------------------------
302 MESSAGE Parameter is missing. (THMGRERR 302)
CAUSE An input parameter to the command is missing.
ACTION Use the HELP facility for this command or use the
manual and enter the command again.
---------------------------------------------------------------
303 MESSAGE Parameter length is invalid. (THMGRERR 303)
CAUSE The input parameter size exceeds the size allowed
for this parameter.
ACTION Use the HELP facility for this command or use the
manual and enter the command again.
---------------------------------------------------------------
303 MESSAGE Parameter composition is invalid. (THMGRERR 304)
CAUSE The input parameter is not correct.
ACTION Use the HELP facility for this command or use the
manual and enter the command again.
---------------------------------------------------------------
305 MESSAGE Parameter is invalid. (THMGRERR 305)
CAUSE The input parameter type is not correct. A numeric
input parameter can only be accepted for numeric
arguments, and a string parameter for string
arguments.
ACTION Use the HELP facility for this command or use the
manual and enter the command again.
---------------------------------------------------------------
307 MESSAGE Info is invalid. (THMGRERR 307)
CAUSE The information passed to this program via the
";INFO=" parm in the RUN command is invalid.
ACTION
---------------------------------------------------------------
309 MESSAGE Failed to open the message catalog. (THMGRERR
309)
CAUSE Unable to open, or possibly find the catalog
associated with this utility.
ACTION Restore the message catalog (TMCATnnn, where nnn is
the native language ID number of the machine) from
backup tapes and continue.
---------------------------------------------------------------
310 MESSAGE Invalid character. (THMGRERR 310)
CAUSE Invalid character detected in the command line.
ACTION Enter command again.
---------------------------------------------------------------
315 MESSAGE Parameter length overflow. (THMGRERR 315)
CAUSE The input parameter size exceeds the size allowed
for this parameter.
ACTION Use the HELP facility for this command or use the
manual and enter the command again.
---------------------------------------------------------------
321 MESSAGE Invalid REDO command. (THMGRERR 321)''
CAUSE Cannot find the command to redo, it is either
invalid or has been pushed off the top of the stack
and is no longer accessible.
ACTION Enter the command again.
---------------------------------------------------------------
324 MESSAGE Cannot recognize the command passed to HELP.
(THMGRERR 324)
CAUSE Cannot find the command to provide help.
ACTION Use the HELP summary to identify which command it
should be and enter the command again. The HELP
summary is accessed by issuing the command HELP
without arguments.
---------------------------------------------------------------
328 MESSAGE *Error: Out of Heap space. (THMGRERR 328)
CAUSE Cannot get the additional space necessary to
execute.
ACTION Run the program again specifying a larger NMHEAP
size.
---------------------------------------------------------------
330 MESSAGE Security violation. (THMGRERR 330)
CAUSE The user does not have the privilege level
necessary to execute this command.
ACTION Obtain the necessary privilege level and try again.
---------------------------------------------------------------
331 MESSAGE Failed to open exclusively. (THMGRERR 331)
CAUSE This program is being accessed by someone else at
this time.
ACTION Wait until the program is available for exclusive
access.
---------------------------------------------------------------
333 MESSAGE Cannot deallocate space. (THMGRERR 333)
CAUSE An internal error occurred which will not allow the
program to deallocate space.
ACTION Try the command again.
---------------------------------------------------------------
334 MESSAGE Failed to get the run parameter. (THMGRERR 334)
CAUSE The program failed on access of the ";PARM="
argument of the RUN command.
ACTION Try the command again. Use the CI HELP facility
for the RUN command.
---------------------------------------------------------------
335 MESSAGE HPMYPROGAM failed. (THMGRERR 335)
CAUSE The program call to HPMYPROGRAM intrinsic to get
the program's name failed.
ACTION Exit the program and try again.
---------------------------------------------------------------
336 MESSAGE Trying to open the program a second time.
(THMGRERR 336)
CAUSE More than one access to the program is not allowed.
ACTION Wait until the program is available for exclusive
access.
---------------------------------------------------------------
337 MESSAGE Only one user is allowed to configure thresholds.
(THMGRERR 337)
CAUSE Exclusive access to the configuration data is
required.
ACTION Wait until the program is available for exclusive
access.
---------------------------------------------------------------
338 MESSAGE Threshold Manager must be enabled. (THMGRERR 338)
CAUSE This command requires Threshold Manager to be
enabled.
ACTION Execute the command ENABLEMANAGER and try the
command again.
---------------------------------------------------------------
401 MESSAGE Incomplete command pending on end-of-file.
(THMGRERR 401)
CAUSE The program has encountered EOF on the redirected
output file.
ACTION Create a larger output file and execute command
again.
---------------------------------------------------------------