HP 3000 Manuals

(S/R) (contd.) [ MPE/iX Error Messages Manual Volume II ] MPE/iX 5.0 Documentation


MPE/iX Error Messages Manual Volume II

(S/R) (contd.) 

1945         MESSAGE    RESTORE ENCOUNTERED ERROR ALLOCATING SECONDARY
                      STORAGE: SSM ERROR: !.  (S/R 1945)

           CAUSE      RESTORE internal error.

           ACTION     Call your Hewlett-Packard Support Representative.

---------------------------------------------------------------

1946         MESSAGE    AREA OF DATA LOSS LIES BETWEEN BYTE OFFSET ! AND
                      BYTE OFFSET !

           CAUSE      Media read error caused some data loss.

           ACTION     Use duplicate tape set with good media.

---------------------------------------------------------------

1948         MESSAGE    MPE DIRECTORIES FAILED TO RESTORE :

           CAUSE      Some directories not restored.

           ACTION     Check previous error message about directory not
                      restored.

---------------------------------------------------------------

1950         MESSAGE    FILES FAILED TO RESTORE :

           CAUSE      Some files were not restored.

           ACTION     Check the restore listing to see which files did
                      not restore, and any error messages associated with
                      those files.

---------------------------------------------------------------

1951         MESSAGE    FILES NOT ON MEDIA :

           CAUSE      Some files found no match on tape.

           ACTION     Use the tape set which has these files.

---------------------------------------------------------------

1957         MESSAGE    RESTORE WAS UNABLE TO CREATE USER "!" IN ACCOUNT
                      "!". CIERROR !.  (S/R 1957)

           CAUSE      Newuser command issued by store failed.

           ACTION     Call your Hewlett-Packard Support Representative.

---------------------------------------------------------------

1958         MESSAGE    RESTORE WAS UNABLE TO CREATE ACCOUNT "!".
                      CIERROR !.  (S/R 1958)

           CAUSE      Newaccount command issued by store failed.

           ACTION     Call your Hewlett-Packard Support Representative.

---------------------------------------------------------------

1959         MESSAGE    RESTORE WAS UNABLE TO CREATE GROUP   "!" IN
                      ACCOUNT "!".CIERROR !.  (S/R 1959)

           CAUSE      Newgroup command issued by store failed.

           ACTION     Call your Hewlett-Packard Support Representative.

---------------------------------------------------------------

1960         MESSAGE    RESTORE CREATED ACCOUNT "!"

           CAUSE      As part of the CREATE option, restore created the
                      specified account.  This account has default
                      capabilities.

           ACTION     Information only.

---------------------------------------------------------------

1961         MESSAGE    RESTORE CREATED GROUP   "!" IN ACCOUNT "!"

           CAUSE      As part of the CREATE option, restore created the
                      specified group.  This group has default
                      capabilities.

           ACTION     Information only.

---------------------------------------------------------------

1962         MESSAGE    RESTORE CREATED USER    "!" IN ACCOUNT "!"

           CAUSE      As part of the CREATE option, restore created the
                      specified user.  This user has default
                      capabilities.

           ACTION     Information only.

---------------------------------------------------------------

1963         MESSAGE    RESTORE CREATED ACCOUNT "!" ON VOLUMESET "!"

           CAUSE      As part of the CREATE option, restore created the
                      specified account on the specified volume set.
                      This account has default capabilities.

           ACTION     Information only.

---------------------------------------------------------------

1964         MESSAGE    RESTORE WAS UNABLE TO CREATE ACCOUNT "!".  ON
                      VOLUMESET "!" CIERROR !  (S/R 1964)

           CAUSE      Restore failed to create an account on user volset
                      for create option.

           ACTION     Call your Hewlett-Packard Support Representative.

---------------------------------------------------------------

1965         MESSAGE    RESTORE CREATED GROUP   "!" IN ACCOUNT "!" ON
                      VOLUMESET "!"

           CAUSE      As part of the CREATE option, restore created the
                      specified group on the specified volume set.  This
                      account has default capabilities.

           ACTION     Information only.

---------------------------------------------------------------

1966         MESSAGE    RESTORE WAS UNABLE TO CREATE GROUP  "!" IN
                      ACCOUNT "!". ON VOLUMESET "!". CIERROR !.  (S/R
                      1966)

           CAUSE      Restore failed to create a group on user volset for
                      create option.

           ACTION     Call your Hewlett-Packard Support Representative.

---------------------------------------------------------------

1967         MESSAGE    RESTORE CREATED GROUP   "!" MIRROR IN ACCOUNT "!"
                      FOR VOLUMESET "!"

           CAUSE      As part of the CREATE option, restore created the
                      specified group on the specified mirrored volume
                      set.  This account has default capabilities.

           ACTION     Information only.

---------------------------------------------------------------

1968         MESSAGE    RESTORE WAS UNABLE TO CREATE GROUP "!" IN ACCOUNT
                      "!" MIRROR FOR VOLUMESET "!". CIERROR !.  (S/R
                      1968)

           CAUSE      Restore failed to create a group mirror on user
                      volset for create option.

           ACTION     Call your Hewlett-Packard Support Representative.

---------------------------------------------------------------

1969         MESSAGE    WARNING: RESTORE WAS UNABLE TO CREATE GROUP   "!"
                      IN ACCOUNT "!"  MIRROR FOR VOLUMESET "!".  CIERROR
                      !. (S/R 1969)

           CAUSE      Restore failed to create a group mirror on user
                      volset for create option.

           ACTION     Call your Hewlett-Packard Support Representative.

---------------------------------------------------------------

1970         MESSAGE    RESTORE CREATED ACCOUNT "!" MIRROR FOR VOLUMESET
                      "!".

           CAUSE      As part of the CREATE option, restore created the
                      specified accout on the specified mirrored volume
                      set.  This account has default capabilities.

           ACTION     Information only.

---------------------------------------------------------------

1971         MESSAGE    RESTORE WAS UNABLE TO CREATE ACCOUNT "!"  MIRROR
                      FOR VOLUMESET "!". CIERROR !.  (S/R 1971)

           CAUSE      Restore failed to create a account mirror on user
                      volset for create option.

           ACTION     Call your Hewlett-Packard Support Representative.

---------------------------------------------------------------

1972         MESSAGE    STORE MEDIA CREATED ON ! IS ON LDEV !

           CAUSE      Store tape time stamp mismatch with STORESET
                      option.

           ACTION     Option check the tape set creation times, exclude
                      STORESET.

---------------------------------------------------------------

1974         MESSAGE    RESTORE WAS UNABLE TO CREATE ACCOUNT "HPSPOOL".
                      (S/R 1974)

           CAUSE      The HPSPOOL account does not exist on the system
                      volume set.

           ACTION     Have system manager review the circumstances of the
                      disappearance of the HPSPOOL account, then do a
                      system reboot, which will recreate HPSPOOL.

---------------------------------------------------------------

1975         MESSAGE    RESTORE WAS UNABLE TO CREATE GROUP  "OUT" IN
                      ACCOUNT "HPSPOOL". (S/R 1975)

           CAUSE      The OUT.HPSPOOL group does not exist on the system
                      volume set.

           ACTION     Have system manager review the circumstances of the
                      disappearance of the OUT.HPSPOOL group, then do a
                      system reboot, which will recreate HPSPOOL.

---------------------------------------------------------------

1976         MESSAGE    VSTORE OPTION CANNOT BE USED TO READ MPEv MEDIA
                      (S/R 1977)

           CAUSE      A MPE/V format tape was mounted for a VSTORE
                      operation.

           ACTION     Only Native Mode Store tapes can be verified by
                      VSTORE.

---------------------------------------------------------------

1985         MESSAGE    ERROR SKIPPING PAST THE SLT (S/R 1985)

           CAUSE      RESTORE encountered an error while trying to skip
                      past the SLT portion of a combined SLT/Store tape.

           ACTION     Check the tape drive and reissue the command.
                      If the problem persists, contact your HP
                      representative.

---------------------------------------------------------------

1986         MESSAGE    NO FILES STORED AFTER THE SLT (S/R 1986)

           CAUSE      This SLT is not a combined SLT/Store Tape.

           ACTION     This tape can only be used as a system load tape.

---------------------------------------------------------------

1987         MESSAGE    RESTORE ENCOUNTERED AN ERROR ON SLT REEL SWITCH
                      (S/R 1987)

           CAUSE      A tape error occurred while RESTORE was switching
                      to the next reel of a combind SLT/Store set tape.

           ACTION     Check the tape drive and reissue the command.
                      If the problem persists, contact your HP
                      representative.

---------------------------------------------------------------

2009         MESSAGE    RESTORE GOT A WARNING CREATING USER    "!" IN
                      ACCOUNT "!". CIWARN !  (S/R 2009)

           CAUSE      While creating a the specified new user, RESTORE
                      got a warning.

           ACTION     Information only, the user was still created.  Look
                      up the CI warning for more detail.

---------------------------------------------------------------

2101         MESSAGE    SPECIFIED DATABASE(S) COULD NOT BE RESTORED.
                      (S/R 2101)

           CAUSE      Database not restored.

           ACTION     Check previous error messages.

---------------------------------------------------------------

2102         MESSAGE    ! NOT RESTORED: DATABASE EXISTS: KEEP SPECIFIED

           CAUSE      The specified database already exists on the
                      system, so RESTORE can not overwrite it, due to the
                      KEEP option being specified.

           ACTION     If you really want to overwrite the existing
                      database, redo the RESTORE command, specifiying the
                      NOKEEP option instead.

---------------------------------------------------------------

2110         MESSAGE    DBSTORE REQUIRES THAT BOTH THE 'HIGH' AND 'LOW'
                      WATER MARK BE SPECIFIED.  (S/R 2110)

           CAUSE      Only one of high or low option was specified.

           ACTION     Specify both high and low options.

---------------------------------------------------------------

2111         MESSAGE    DBSTORE COULDN'T FIND THE CORRECT NUMBER DATA
                      SETS (COUNTING THE ROOT FILE).  ! WERE SPECIFIED
                      AND ! WERE FOUND.  (S/R 2111)

           CAUSE      There were some extra or missing datasets.

           ACTION     Check database consistency.

---------------------------------------------------------------

2120         MESSAGE    SENDMAIL TO DBSTORE/DBRESTOR FROM STORE/RESTORE
                      FAILED.  (S/R 2120)

           CAUSE      Send mail utility failure.

           ACTION     Call your Hewlett-Packard Support Representative.

---------------------------------------------------------------

2128         MESSAGE    STORE/RESTORE ENCOUNTERED USER ABORTED IO ON LDEV
                      !.  (S/R 2128)

           CAUSE      Break/abort or ABORTIO command killed store IO.

           ACTION     Redo store if you need to.

---------------------------------------------------------------

2129         MESSAGE    STORE/RESTORE ENCOUNTERED USER ABORTED IO.  (S/R
                      2129)

           CAUSE      Break/abort or ABORTIO command killed store IO.

           ACTION     Redo store if you need to.

---------------------------------------------------------------

2132         MESSAGE    STORE/RESTORE ENCOUNTERED EXCESSIVE REWIND
                      RETRIES ON LDEV !.  EXAMINE CABLE CONNECTIONS OR
                      BUS ADDRESS.  (S/R 2132)

           CAUSE      Dirty tape heads or bad quality media.

           ACTION     Clean tape heads and use new tapes.

---------------------------------------------------------------

2133         MESSAGE    STORE/RESTORE ENCOUNTERED EXCESSIVE REWIND
                      RETRIES ON REMOTE DEVICE FILE "!".  (S/R 2133)

           CAUSE      Dirty tape heads or bad quality media.

           ACTION     Clean tape heads and use new tapes.

---------------------------------------------------------------

2134         MESSAGE    STORE/RESTORE ENCOUNTERED EXCESSIVE REWIND
                      RETRIES ON FILE "!". (S/R 2134)

           CAUSE      Dirty tape heads or bad quality media.

           ACTION     Clean tape heads and use new tapes.

---------------------------------------------------------------

2136         MESSAGE    STORE/RESTORE ENCOUNTERED CATASTROPHIC IO ERROR
                      FROM SUBSYS !: ERROR. !  (S/R 2136)

           CAUSE      Fatal IO error from specified subsystem.

           ACTION     Call your Hewlett-Packard Support Representative.

---------------------------------------------------------------

2202         MESSAGE    STORE/RESTORE ENCOUNTERED FAILURE RELEASING FILE
                      LOCKING MECHANISM (LAT).  (S/R 2202)

           CAUSE      Store could not release global file locking table.

           ACTION     Call your Hewlett-Packard Support Representative.

---------------------------------------------------------------

2203         MESSAGE    STORE/RESTORE ENCOUNTERED FAILURE ACTIVATING FILE
                      LOCKING MECHANISM (LAT).  (S/R 2203)

           CAUSE      Store could not activate global file locking table.

           ACTION     Call your Hewlett-Packard Support Representative.

---------------------------------------------------------------

2204         MESSAGE    STORE/RESTORE ENCOUNTERED ERROR READING STORE IPC
                      MESSAGE: IPC ERROR !.  (S/R 2204)

           CAUSE      System utility failure.

           ACTION     Call your Hewlett-Packard Support Representative.

---------------------------------------------------------------

2205         MESSAGE    STORE/RESTORE ENCOUNTERED ERROR SENDING STORE IPC
                      MESSAGE: IPC ERROR !.  (S/R 2205)

           CAUSE      System utility failure.

           ACTION     Call your Hewlett-Packard Support Representative.

---------------------------------------------------------------

2206         MESSAGE    STORE/RESTORE FAILED TO CREATE ITS IPC PORT: IPC
                      ERROR !.  (S/R 2206)

           CAUSE      System utility failure.

           ACTION     Call your Hewlett-Packard Support Representative.

---------------------------------------------------------------

2207         MESSAGE    STORE/RESTORE FAILED TO CREATE ITS TRANSIENT DATA
                      SPACE: VSM ERROR !.  (S/R 2207)

           CAUSE      Store could not create its work space.

           ACTION     Call your Hewlett-Packard Support Representative.

---------------------------------------------------------------

2208         MESSAGE    STORE FAILED TO CREATE ITS SURROGATE PROCESS:
                      PROCESS MANAGEMENT ERROR !.  (S/R 2208)

           CAUSE      System utility failure.

           ACTION     Call your Hewlett-Packard Support Representative.

---------------------------------------------------------------

2209         MESSAGE    STORE/RESTORE OPERATION ABORTED BY USER REQUEST.
                      (S/R 2209)

           CAUSE      User aborted store operation.

           ACTION     None.

---------------------------------------------------------------

2213         MESSAGE    STORE/RESTORE ENCOUNTERED FOPEN FAILURE ON DEVICE
                      FILE "!".  (S/R 2213)

           CAUSE      Store aborted or device unavailable.

           ACTION     Set a file equation for a correct store device.

---------------------------------------------------------------

2215         MESSAGE    DEVICE FILE "!" REFERENCES STORAGE MEDIA THAT
                      CANNOT BE USED BYSTORE/RESTORE.  ONLY 1/2 INCH TAPE
                      ACCESS IS SUPPORTED IN NATIVE MODE.  (S/R 2215)

           CAUSE      Unsupported device file used.

           ACTION     Set a file equation for a correct store device.

---------------------------------------------------------------

2216         MESSAGE    DEVICE FILE "!" REFERENCES LABELED TAPE MEDIA.
                      LABELED TAPE ACCESS IS NOT ALLOWED WITH A
                      '(RE)STORESET'.  (S/R 2216)

           CAUSE      NMstore found a labelled tape or device file
                      equation.

           ACTION     Use unlabelled tapes and file equations.

---------------------------------------------------------------

2217         MESSAGE    DEVICE FILE "!" HAS A DENSITY THAT IS DIFFERENT
                      FROM THE DENSITY SPECIFIED FOR THE FIRST DEVICE OF
                      THE '(RE)STORESET'.  ALL TAPE DEVICE FILES MUST
                      HAVE THE SAME DENSITY.  (S/R 2217)

           CAUSE      The tape density are not identical accross
                      store/restore devices.

           ACTION     Use consistent device density for all drives.

---------------------------------------------------------------

2218         MESSAGE    DEVICE FILE "!" REFERENCES STORAGE MEDIA THAT
                      USES A DIFFERENT ACCESS METHOD THAN FIRST DEVICE OF
                      THE '(RE)STORESET'.  ALL DEVICE FILES IN A SET MUST
                      USE THE SAME ACCESS METHOD.  (S/R 2218)

           CAUSE      The access methods are not identical accross
                      store/restore devices.

           ACTION     Use consistent access methods for all drives.

---------------------------------------------------------------

2219         MESSAGE    DEVICE FILE "!" REFERENCES STORAGE MEDIA THAT HAS
                      A RECORD SIZE DIFFERENT THAN FIRST DEVICE OF THE
                      '(RE)STORESET'.  ALL DEVICE FILES IN A SET MUST USE
                      THE SAME RECORD SIZE.  (S/R 2219)

           CAUSE      The record sizes are not identical accross
                      store/restore devices.

           ACTION     Use consistent record size for all drives.

---------------------------------------------------------------

2220         MESSAGE    DEVICE FILE "!" REFERENCES STORAGE MEDIA WITH A
                      FORMAT DIFFERENT THAN FIRST DEVICE OF THE
                      '(RE)STORESET'.  ALL DEVICE FILES IN A SET MUST USE
                      THE SAME FORMAT (EITHER LABELED OR UNLABELED).
                      (S/R 2220)

           CAUSE      The media format are not identical accross
                      store/restore devices.

           ACTION     Use consistent media format for all drives.

---------------------------------------------------------------

2221         MESSAGE    TAPE DENSITY OF DEVICES IN (RE)STORESET ! DOES
                      NOT MATCH THE DENSITY OF THE DEVICES IN
                      (RE)STORESET !.  ALL DENSITIES MUST MATCH.  (S/R
                      2221)

           CAUSE      The tape density are not identical accross
                      store/restore devices.

           ACTION     Use consistent device density for all drives.

---------------------------------------------------------------



MPE/iX 5.0 Documentation