HP 3000 Manuals HP 3000 Manuals
(Subsystem 98) (contd.)
708 MESSAGE The procedure DEMOLISH_PORT can not send DEMOLISH
message to PFP port.
---------------------------------------------------------------
709 MESSAGE There are waiters on the demolished port.
---------------------------------------------------------------
710 MESSAGE The procedures DEMOLISH_PORT,
PFP_NAME_TO_PORT_NUM, and OPEN_PORT can not lock
the port directory; bad status from STLOCK.
---------------------------------------------------------------
711 MESSAGE The procedure DEMOLISH_PORT can not delete the
port directory entry; bad status from STDELID.
---------------------------------------------------------------
712 MESSAGE The procedures DEMOLISH_PORT and UNLOCK_DIRECTORY
can not unlock the port directory; bad status from
STUNLOCK.
---------------------------------------------------------------
713 MESSAGE At process termination time (DEMOLISH_PORT), an
error from TABLE MANAGEMENT occurred when releasing
the standard ports entry to the table.
---------------------------------------------------------------
714 MESSAGE The procedure DELETE_PORT_BASE can not
release the semaphore port; bad status from
RECEIVE_FROM_SEMAPHORE_PORT.
---------------------------------------------------------------
715 MESSAGE The procedure DELETE_PORT_ACCESS is still holding
the semaphore port after release.
---------------------------------------------------------------
716 MESSAGE The procedure LOSE_PORT can not flush waiting
process from the specified wait queue of the
semaphore port being purged; bad status from
REPLY_TO_WAITER.
---------------------------------------------------------------
717 MESSAGE The procedure CHANGE_OWNERSHIP corrupted the port
ownership list; port's ownership information
inconsistent with PIB's.
---------------------------------------------------------------
718 MESSAGE The procedure CHANGE_OWNERSHIP detected a
corrupted port ownership list; port's ownership
information does not agree with PIB's.
---------------------------------------------------------------
719 MESSAGE Various procedures caused an unexpected status
from PREP_PORT.
---------------------------------------------------------------
720 MESSAGE The procedure DEC_PFP_COUNT detected an error
accessing PFP upon CREATE_PORT error; can not
decrement PFP's use count.
---------------------------------------------------------------
721 MESSAGE The procedure LOCATE_PORT_ENTRY can not read port
directory entry; bad status from STREADKEY.
---------------------------------------------------------------
722 MESSAGE The procedures FAST_RELEASE_MSG_FRAME, SEND_MSG,
REL_MSG_FRAME,DO_SERVER(SCHEDULE_SERVER), and
RELEASE_FRAME cannot release message frame; bad
status from RELEASE_TABLE_ENTRY.
---------------------------------------------------------------
723 MESSAGE The procedures FAST_CONTINUE_SERVER_IN_PFP and
FAST_EXECUTE_SERVER_IN_PFP can not send message to
PFP port.
---------------------------------------------------------------
724 MESSAGE There is a problem with the message frame in the
GPO cache.
---------------------------------------------------------------
725 MESSAGE The port's server caused an unexpected escape.
---------------------------------------------------------------
726 MESSAGE The procedure INTERNAL_SEND can not get message
frame for internal send.
---------------------------------------------------------------
727 MESSAGE The procedure INTERNAL_SEND can not send to
internal facility port; bad status from SEND_MSG.
---------------------------------------------------------------
728 MESSAGE The PORT FACILITY PROCESS is not available yet.
---------------------------------------------------------------
729 MESSAGE The procedure DELAYED_AWAKE_PROCESS can not send
the delayed awake message to PFP.
---------------------------------------------------------------
730 MESSAGE The decrement of the port's total freeze count
causes it to become negative.
---------------------------------------------------------------
731 MESSAGE The port is already totally frozen, but partial
freeze failed; no reason for this to happen.
---------------------------------------------------------------
732 MESSAGE The procedure INITIATE_UNBLOCKED_MAKE_PRESENT (2)
can not get message frame for make present port;
bad status from GET_MSG_FRAME.
---------------------------------------------------------------
733 MESSAGE The procedures INITIATE_UNBLOCKED_MAKE_PRESENT
and PORT_MAKE_PRES can not cleanup the message on
the make present port and give it back to the
message pool; bad status from RETRIEVE_MSG.
---------------------------------------------------------------
734 MESSAGE The procedure BLOCKED_MAKE_PRESENT can not get
FREEZE reply from MEMORY MANAGER for MAKE_PRESENT;
bad status from EXTEND_RECEIVE.
---------------------------------------------------------------
735 MESSAGE The procedure BLOCKED_MAKE_PRESENT detected a bad
FREEZE reply message from MEMORY MANAGER.
---------------------------------------------------------------
736 MESSAGE The FREEZE count is zero; can not hold FREEZE
since port is not totally frozen.
---------------------------------------------------------------
737 MESSAGE The FREEZE count is zero; cannot release FREEZE
because the port must be totally frozen when
called.
---------------------------------------------------------------
738 MESSAGE The procedure CHECK_PORT_DESCRIPTOR detected an
unknown port type in the port descriptor.
---------------------------------------------------------------
739 MESSAGE The procedure ENABLE_TIMEOUT can not alter the
standard message port for time out; bad status from
CHANGE_SUBQUEUE.
---------------------------------------------------------------
740 MESSAGE The procedure ENABLE_TIMEOUT can not get timer
for time out; bad status from GET_TIMER.
---------------------------------------------------------------
741 MESSAGE The procedure DISABLE_TIMEOUT can not access the
standard message port for time out; bad status from
PORT_INFO.
---------------------------------------------------------------
742 MESSAGE The procedure DISABLE_TIMEOUT can not release
timer; unexpected status from RELEASE_TIMER.
---------------------------------------------------------------
743 MESSAGE The timer has popped. Expected a reply message,
but RECEIVE failed; bad status from EXTEND_RECEIVE.
---------------------------------------------------------------
744 MESSAGE The procedure INCREASE_PROCESS_PRIORITY can not
hold or increase process's priority; bad status
from NOTIFY_DISPATCHER.
---------------------------------------------------------------
745 MESSAGE The procedure BOOST_SERVER_PRIORITY can not boost
server's priority; server's PIN is nil according to
the SCB.
---------------------------------------------------------------
746 MESSAGE The procedure DECREASE_CALLERS_PRIORITY can not
decrease caller's priority; bad status from
NOTIFY_DISPATCHER.
---------------------------------------------------------------
747 MESSAGE The procedure DROP_SERVER_PRIORITY can not drop
server's priority because server has nil PIN.
---------------------------------------------------------------
748 MESSAGE The caller wanted to WAIT, but can not WAIT while
program is on the ICS.
---------------------------------------------------------------
749 MESSAGE The procedure INTERRUPT_TARGET_PROCESS can not
AWAKE process blocked on port WAIT; bad status from
NOTIFY_DISPATCHER.
---------------------------------------------------------------
750 MESSAGE The system is trying to IMPEDE the process by
waiting for the unimpede message on the impede
subqueue of the process standard message port;
SEND_MSG failed.
---------------------------------------------------------------
751 MESSAGE The system is trying to UNIMPEDE the process by
sending a wakeup message to its standard message
port, but SEND_MSG failed.
---------------------------------------------------------------
752 MESSAGE The procedure CLEAR_WWS can not CLEAR the wake up
waiting switch; bad status from PORT_CONTROL.
---------------------------------------------------------------
753 MESSAGE Unexpected status was received from
IPC_WAIT_PROCESS.
---------------------------------------------------------------
754 MESSAGE Unexpected status was received from
IPC_AWAKE_PROCESS.
---------------------------------------------------------------
755 MESSAGE The procedure DELAYED_SEND can not perform the
actual delayed send; bad status from EXTEND_SEND or
INSERT_MSG.
---------------------------------------------------------------
756 MESSAGE Received unexpected status from EXTEND_RECEIVE
while receiving the delayed purge message.
---------------------------------------------------------------
757 MESSAGE An unrecoverable error occurred during
PORT_PURGE_PROCESS.
---------------------------------------------------------------
758 MESSAGE An error occurred while initializing PFP.
---------------------------------------------------------------
759 MESSAGE Bad status occurred from RECEIVE_MSG in
PORT_FACILITY_PROCESS.
---------------------------------------------------------------
760 MESSAGE Received an unexpected PFP message type.
---------------------------------------------------------------
761 MESSAGE Received bad status from internal operation.
---------------------------------------------------------------
762 MESSAGE Received message from an invalid subqueue on the
MAKE PRESENT port.
---------------------------------------------------------------
763 MESSAGE Requested MEMORY MANAGEMENT to MAKE PRESENT a
port entity; MEMORY MANAGEMENT'S reply indicates
the MAKE PRESENT was unsuccessful.
---------------------------------------------------------------
764 MESSAGE Received unexpected message type in MAKE PRESENT
message.
---------------------------------------------------------------
765 MESSAGE The procedure GET_SHR_OWNER_ENTRY can not get
free entry from the shared owner list pool; shared
owner list exhausted.
---------------------------------------------------------------
766 MESSAGE The processes WAIT_FOR_RESOURCE and
WAKE_UP_HEAD_WAITER can not block process to wait
for semaphore; bad status from NOTIFY_DISPATCHER
while blocking process.
---------------------------------------------------------------
767 MESSAGE Either the dispatcher or interrupts were disabled
after awaking from a CB WAIT.
---------------------------------------------------------------
768 MESSAGE The owner of the semaphore being blocked is
NIL_PIN.
---------------------------------------------------------------
769 MESSAGE Various procedures caused the system to abort in
an attempt to access unknown semaphore type.
---------------------------------------------------------------