HP 3000 Manuals HP 3000 Manuals
(Subsystem 236) (contd)
9555 MESSAGE Output spooler, LDEV #: The spooler received an
invalid message type on its port.
---------------------------------------------------------------
9556 MESSAGE Output spooler, LDEV #: The spooler received an
unexpected escape during normal processing.
---------------------------------------------------------------
9557 MESSAGE Output spooler, LDEV #: The spooler detected a
fatal condition while performing an internal
calculation. Please report the spooling subsystem
error number to your support engineer.
---------------------------------------------------------------
9558 MESSAGE Output spooler, LDEV #: The spooler could not
access the Spooling Process Information Table
(SPIT).
---------------------------------------------------------------
9559 MESSAGE Output spooler, LDEV #: The spooler failed to
update the Spooling Process Information Table
(SPIT).
---------------------------------------------------------------
9560 MESSAGE Output spooler, LDEV #: Spoolfile internal
format error, attempted to access beyond file
bounds. The file will be deferred.
---------------------------------------------------------------
9561 MESSAGE Output spooler, LDEV #: Unsupported internal
function code "!". Legal values are 1-4 and
64-255.
---------------------------------------------------------------
9562 MESSAGE Output spooler, LDEV #: The device storage
manager reported an invalid device status type "!".
Please report the type and the spooling subsystem
error number to your support engineer.
---------------------------------------------------------------
9563 MESSAGE Output spooler, LDEV #: The device reported a
parity or self-test error.
---------------------------------------------------------------
9564 MESSAGE Output spooler, LDEV #: The device has
insufficient memory to process data in this file.
---------------------------------------------------------------
9565 MESSAGE Output spooler, LDEV #: The device has reported
100 protocol errors while processing this file.
---------------------------------------------------------------
9566 MESSAGE Output spooler, LDEV #: The device has reported
100 instances of data overrun while processing this
file.
---------------------------------------------------------------
9567 MESSAGE Output spooler, LDEV#\: The required HPSPOOL
account is missing. The spooler cannot continue.
---------------------------------------------------------------
9568 MESSAGE Output spooler, LDEV #: The spooler could not
open CATALOG.PUB.SYS to format the error trailer
for SPOOLID #O!. The spooler will continue without
printing the error trailer.
CAUSE The spooler could not FOPEN CATALOG.PUB.SYS. The
reason for this failure is displayed following this
message.
ACTION Correct the problem with CATALOG.PUB.SYS. This
allows the spooler to print future error trailers,
however the spooler will not print any error
trailers until the problem is corrected.
---------------------------------------------------------------
9569 MESSAGE Output spooler, LDEV #: The GENMESSAGE intrinsic
reported error ! while formatting the error trailer
for SPOOLID #O!. The spooler will continue without
printing the error trailer.
CAUSE Self-explanatory.
ACTION Determine the cause of the GENMESSAGE error and
correct it. This allows the spooler to print
future error trailers, however the spooler will not
print any error trailers until the problem is
corrected.
---------------------------------------------------------------
9570 MESSAGE Output spooler, LDEV #: The spooler detected a
non-fatal condition while performing an internal
calculation to print the error trailer for SPOOLID
#O!. The spooler will continue without finishing
the error trailer.
CAUSE Corruption in the list of messages which make up
the error trailer. The index into the list
exceeded the maximum number of possible elements in
the list without detection of the end-of-list mark.
ACTION Report the message number to your support engineer.
---------------------------------------------------------------
9571 MESSAGE Output spooler, LDEV #: Could not set (clear)
serial printer transparent mode.
---------------------------------------------------------------
9572 MESSAGE Output spooler, LDEV #\: Spoolfile ! deferred
due to a user command.
CAUSE A user entered a SPOOLF <spoolid set>;DEFER or
ALTSPOOLFILE <spoolid -or- ldev> ; DEFER which
referenced the file currently being printed by this
device's spooler.
ACTION This message is informational. No action is
required.
---------------------------------------------------------------
9573 MESSAGE Output spooler, LDEV #\: Spoolfile ! deferred
due to a file error or abnormal condition.
CAUSE 1. The file system reported an error while
accessing the spoolfile. 2. The spooler detected
internal spoolfile format corruption.
ACTION Either of the above reasons generates an
appropriate error message. Correct the situation
if possible, then SPOOLF...;UNDEFER the file to try
to reprint the file.
---------------------------------------------------------------
9574 MESSAGE Output spooler, LDEV #\: The spooler was unable
to send a message to its port.
CAUSE The MPE/iX Ports Facility returned an error status
to the spooler. The spooler process will
terminate.
ACTION This should never happen. If it does, record all
displayed messages, restart the spooler process and
contact your Hewlett-Packard representative.
---------------------------------------------------------------
9575 MESSAGE Output spooler, LDEV #\: Error while trying to
set spooler state to SUSPEND PENDING.
CAUSE An internal routine which modifies the running
state of the spooler process reported an error
status to the spooler. The spooler process will
terminate.
ACTION This should never happen. If it does, record all
displayed messages, restart the spooler process and
contact your Hewlett-Packard representative.
---------------------------------------------------------------
9901 MESSAGE Output spooler, LDEV #: I/O error, the FCONTROL
intrinsic failed while creating the checkpoint file
group.
---------------------------------------------------------------
9902 MESSAGE Output spooler, LDEV #: I/O error, the
FDEVICECONTROL intrinsic failed.
---------------------------------------------------------------
9903 MESSAGE Output spooler, LDEV #: The spooler encountered
an unexpected escape while processing an FOPEN or
FCLOSE. The escape code is pushed on the stack.
---------------------------------------------------------------
9904 MESSAGE Output spooler, LDEV #: The spooler encountered
an unexpected escape while processing an FCLOSE.
The escape code is pushed on the stack.
---------------------------------------------------------------
10750 MESSAGE Command string contains an invalid PURGE option.
CAUSE The PURGE option on the OUTPUT command of the
SPFXFER utility was incorrectly specified.
ACTION Check and correct the spelling and/or syntax of the
OUTPUT command.
---------------------------------------------------------------
10751 MESSAGE File specifier too long in command string.
---------------------------------------------------------------
10752 MESSAGE Invalid command name.
---------------------------------------------------------------
10753 MESSAGE Invalid tape filename in command string.
---------------------------------------------------------------
10754 MESSAGE Invalid user name in command string.
---------------------------------------------------------------
10755 MESSAGE Invalid command syntax.
---------------------------------------------------------------
10756 MESSAGE Invalid delimiter in command string.
---------------------------------------------------------------
10757 MESSAGE Keyword missing in command string.
---------------------------------------------------------------
10758 MESSAGE Invalid parameters in command string.
---------------------------------------------------------------
10759 MESSAGE Command is too long.
---------------------------------------------------------------
10760 MESSAGE An error has been returned by MYCOMMAND.
---------------------------------------------------------------
10761 MESSAGE Terminal I/O error.
---------------------------------------------------------------
10762 MESSAGE No files were found under the specified
USER.ACCOUNT.
---------------------------------------------------------------
10763 MESSAGE Unable to open tape device.
---------------------------------------------------------------
10764 MESSAGE Cannot open spoolfile on disc.
---------------------------------------------------------------
10765 MESSAGE Invalid tape format.
---------------------------------------------------------------
10766 MESSAGE Error while reading tape.
---------------------------------------------------------------
10773 MESSAGE EOF mark not found.
---------------------------------------------------------------
10774 MESSAGE Wrong reel - incorrect tape label.
---------------------------------------------------------------
10775 MESSAGE Wrong real - incorrect reel number.
---------------------------------------------------------------
10776 MESSAGE Wrong reel - incorrect SPOOK version.
---------------------------------------------------------------
10777 MESSAGE Unable to close tape device.
---------------------------------------------------------------
10778 MESSAGE Error while reading file.
---------------------------------------------------------------
10779 MESSAGE Error while writing file.
---------------------------------------------------------------
10780 MESSAGE Error while writing to tape.
---------------------------------------------------------------
10781 MESSAGE File not found.
---------------------------------------------------------------
10782 MESSAGE Invalid file ID.
---------------------------------------------------------------
10785 MESSAGE Insufficient capability.
---------------------------------------------------------------
10786 MESSAGE Unexpected end of tape encountered.
---------------------------------------------------------------
10787 MESSAGE Wrong reel has been mounted.
---------------------------------------------------------------
10788 MESSAGE Multi reel abort.
---------------------------------------------------------------
10789 MESSAGE Error occurred while accessing Native Mode device
files.
---------------------------------------------------------------