HP 3000 Manuals HP 3000 Manuals
(Subsystem 143) (contd)
538 MESSAGE Opening a MAPPED ACCESS KSAM file without COPY
MODE is not allowed. (FILE OPEN ERROR 538)
---------------------------------------------------------------
539 MESSAGE A bounds violation occurred on the KSAM PARMS
OPTION (item# 54). (FILE OPEN ERROR 539)
---------------------------------------------------------------
540 MESSAGE The REVERSE VT OPTION (item# 48) is not valid, or
a bounds violation occurred on this option. (FILE
OPEN ERROR 540)
---------------------------------------------------------------
541 MESSAGE The group does not exist on the volume set; the
group was not found. (FILE OPEN ERROR 541)
---------------------------------------------------------------
542 MESSAGE The account does not exist on the volume set; the
account was not found. (FILE OPEN ERROR 542)
---------------------------------------------------------------
543 MESSAGE Using the specified block factor and record size
(plus overhead), the resultant block size is too
big. (FILE OPEN ERROR 543)
---------------------------------------------------------------
544 MESSAGE The requested file mapping options conflict with
the mapping options currently in effect for the
file which is already open. The conflict may be in
the follo wing options (item numbers): 18, 21, 57,
58, 60, 61. (FILE OPEN ERROR 544)
---------------------------------------------------------------
545 MESSAGE An unexpected trap was encountered; contact your
SE. (FILE OPEN ERROR 545)
---------------------------------------------------------------
546 MESSAGE The file system can not open a file for MAPPED
and WRITE access when the file is protected by
TRANSACTION MANAGEMENT. (FILE OPEN ERROR 546)
---------------------------------------------------------------
547 MESSAGE The UNPROTECTED VARIABLE ACCESS RIGHTS OPTION
(item# 62) was specified by a caller executing at
an incorrect privilege level. (FILE OPEN ERROR
547)
---------------------------------------------------------------
548 MESSAGE The UNPROTECTED VARIABLE ACCESS RIGHTS OPTION
(item# 62) is not valid, or a bounds violation
occurred on this option. (FILE OPEN ERROR 548)
---------------------------------------------------------------
549 MESSAGE An error occurred while writing to the file
label. (FILE OPEN ERROR 549)
---------------------------------------------------------------
550 MESSAGE A portion of the file resides on a volume which
is not mounted or is not accessible by the
operating system. (FILE OPEN ERROR 550)
---------------------------------------------------------------
551 MESSAGE The caller is not sufficiently privileged to
request the must allocate secondary storage option.
(FILE SYSTEM ERROR -551)
CAUSE The caller is not privileged enough to specify this
option.
ACTION Acquire the necessary privileges prior to the
operation.
---------------------------------------------------------------
552 MESSAGE The must allocate secondary storage option is not
valid. (FILE SYSTEM ERROR -552)
CAUSE Either the value is not valid, or a bounds
violation occurred.
ACTION Supply a legal value for this option.
---------------------------------------------------------------
553 MESSAGE An attempt was made to decrement the File Open
Count Table when the count had not been
incremented. (FILE SYSTEM ERROR -553)
CAUSE A coding error exists in the file system.
ACTION File an SR.
---------------------------------------------------------------
554 MESSAGE Redirecting a system file to a KSAM file is not
allowed. (PROCESS ERROR 554)
---------------------------------------------------------------
555 MESSAGE The perm-to-temp final disposition was specified
by a caller that is at an incorrect privilege
level. (FILE OPEN ERROR 555)
---------------------------------------------------------------
556 MESSAGE An error occurred during the expansion of COMMAND
INTERPRETER variables and expressions in the file
name. (FILE OPEN ERROR 556)
CAUSE Syntax or logic error in the expressions or missing
(undefined) COMMANDINTERPRETER variables.
---------------------------------------------------------------
557 MESSAGE The operating system is not in the UP state, yet
a COMMAND INTERPRETER variable or expression was
found in the file name. This is allowed only when
MPE/iX has booted completely up. (FILE OPEN ERROR
557)
---------------------------------------------------------------
558 MESSAGE For KSAM files, the CREATE domain is allowed only
when the Copy Mode option is enabled. (FILE OPEN
ERROR 558)
---------------------------------------------------------------
560 MESSAGE The caller lacks sufficient privilege to specify
the syntax value provided. (FILE SYSTEM ERROR
-560)
CAUSE A privileged syntax option was specified but the
caller was not privileged.
ACTION Acquire the necessary privileges, or specify a
different syntax.
---------------------------------------------------------------
561 MESSAGE The value supplied to the file close privilege
option is not valid. (FILE SYSTEM ERROR -561)
CAUSE A value outside the legal range of 0..3 was
specified.
ACTION Specify only legal privilege levels.
---------------------------------------------------------------
563 MESSAGE An internal error has occurred, an invalid
attempt has been made to allocate a direct access
device. (FILE SYSTEM ERROR -563)
CAUSE An error exists in the file system.
ACTION File an SR.
---------------------------------------------------------------
568 MESSAGE The inherit environment option is invalid. (FILE
SYSTEM ERROR -568)
CAUSE The value is not in the legal range, or a bounds
violation occurred.
ACTION Specify only legal values for the inherit
environment option.
---------------------------------------------------------------
581 MESSAGE The link spool file option was specified without
the link device option being specified. (FILE
SYSTEM ERROR -581)
CAUSE The link spool file option and the link device
option must be specified together.
ACTION Specify both of these options.
---------------------------------------------------------------
592 MESSAGE The requested operation is not allowed on a
read-only volume. (FILE SYSTEM ERROR -592)
CAUSE A write operation was requested for an object on a
read-only volume.
ACTION Move the file to a read/write volume.
---------------------------------------------------------------
593 MESSAGE The creation of this CM file cannot be made an
atomic operation. (FILE SYSTEM ERROR -593)
CAUSE The FMAVT SIR could not be acquired.
ACTION Retry the operation.
---------------------------------------------------------------
594 MESSAGE CM file opens cannot be restored to normal
operation. (FILE SYSTEM ERROR -594)
CAUSE The FMAVT SIR could not be released.
ACTION Take a dump of the system and file an SR.
---------------------------------------------------------------
595 MESSAGE Files of this file type cannot be created outside
the MPE namespace. (FILE SYSTEM ERROR -595)
CAUSE An attempt was made to create a file outside the
MPE namespace that is not currently supported.
ACTION Use an MPE namespace name to create this file.
---------------------------------------------------------------
596 MESSAGE The specified file code is not valid in this
context. (FILE SYSTEM ERROR -596)
CAUSE An attempt was made to assign a negative file code
to a file outside an MPE group.
ACTION Use a positive file code, or create the file in a
group.
---------------------------------------------------------------
597 MESSAGE NEW Domain cannot be specified for named
hierarchical file system files.
CAUSE Specifying NEW Domain for a named file or
specifying TEMPORARY Domain to open a file whose
parent is a directory in the hierarchical file
system (HFS) is prohibited.
ACTION When opening a file in the NEW Domain in a HFS
directory, do not specify a filename. Files in the
TEMPORARY Domain are restricted to classic MPE/iX
groups.
---------------------------------------------------------------
598 MESSAGE An invalid value was specified for the read
format option. (FILE SYSTEM ERROR -598)
CAUSE The value of the read format option is not valid.
ACTION Supply a valid value for the read format option.
---------------------------------------------------------------
599 MESSAGE Both the file name and the file syntax must be
specified with the raw open option. (FILE SYSTEM
ERROR -599)
CAUSE One or both of the file name and name syntax
options were not specified with the raw open
option.
ACTION Supply both the file name and the name syntax
options with the raw open option.
---------------------------------------------------------------
600 MESSAGE The procedure detected the end of the file, or no
error detected. (FSERR 0)
---------------------------------------------------------------
601 MESSAGE The procedure detected an illegal DB register
setting. (FSERR 601)
---------------------------------------------------------------
602 MESSAGE This is an illegal capability. (FSERR 602)
---------------------------------------------------------------
603 MESSAGE The required parameter is missing. (FSERR 603)
---------------------------------------------------------------
604 MESSAGE Disk free space allocation disabled on all disks
in domain (FSERR 4)
CAUSE A CM error was detected.
ACTION File an SR.
---------------------------------------------------------------
605 MESSAGE DRT number > 511 (FSERR 5)
CAUSE A CM error was detected.
ACTION File an SR.
---------------------------------------------------------------
606 MESSAGE Device has no available spare blocks. (FSERR 6)
CAUSE A CM error was detected.
ACTION File an SR.
---------------------------------------------------------------
607 MESSAGE Unformatted or uninitialized media on device.
(FSERR 7)
CAUSE A CM error was detected.
ACTION File an SR.
---------------------------------------------------------------
608 MESSAGE The procedure detected an illegal parameter
value. (FSERR 608)
---------------------------------------------------------------
609 MESSAGE An invalid file was specified in FOPTIONS. (FSERR
609)
---------------------------------------------------------------
610 MESSAGE This is an invalid record size specification.
(FSERR 610)
---------------------------------------------------------------
611 MESSAGE The procedure detected an invalid blocksize.
(FSERR 611)
---------------------------------------------------------------
612 MESSAGE Record number out of range (FSERR 12)
CAUSE A CM error was detected.
ACTION File an SR.
---------------------------------------------------------------
613 MESSAGE Can't open file multi-access, out of FMAVT
entries (FSERR 13)
CAUSE A CM error was detected.
ACTION File an SR.
---------------------------------------------------------------
615 MESSAGE EXCEEDED THE MAXIMUM MESSAGE FILE OPENS FOR WRITE
ACCESS (FSERR 15)
CAUSE A CM error was detected.
ACTION File an SR.
---------------------------------------------------------------
616 MESSAGE More than 255 opens of a file occurred. (FSERR
616)
---------------------------------------------------------------
617 MESSAGE A magnetic tape runaway occurred. (FSERR 617)
---------------------------------------------------------------
618 MESSAGE The device powered up. (FSERR 618)
---------------------------------------------------------------
619 MESSAGE The forms control was reset. (FSERR 619)
---------------------------------------------------------------
620 MESSAGE This is an invalid operation. (FSERR 620)
---------------------------------------------------------------
621 MESSAGE A data parity error occurred. (FSERR 621)
---------------------------------------------------------------
622 MESSAGE A software time out occurred. (FSERR 622)
---------------------------------------------------------------
623 MESSAGE The procedure detected the end of the tape.
(FSERR 623)
---------------------------------------------------------------