HP 3000 Manuals HP 3000 Manuals
(CIERR) (contd.)
252 MESSAGE FILE CODE OVERRIDES PREVIOUS FILE CODE. (CIWARN
252)
CAUSE You have included more than one file code in your
command line; the system is warning you that it is
using the last one named.
ACTION If you do not wish the system to use the last one
named in your command line, reenter the command,
omitting the redundancy.
---------------------------------------------------------------
253 MESSAGE UNKNOWN FILE CODE TYPE. (CIERR 253)
CAUSE You have entered a file code type that the system
does not recognize.
ACTION To review the command syntax, including what file
code types are acceptable, invoke the online Help
Facility or refer to the MPE/iX Commands Reference
Manual, (32650-90003).
---------------------------------------------------------------
254 MESSAGE NUMERIC FILE CODE MUST BE A POSITIVE INTEGER.
(CIERR 254)
CAUSE You have entered something other than a positive
integer as a numeric file code; the system will not
accept this data.
ACTION To review the command syntax, invoke the online
Help Facility or refer to the MPE/iX Commands
Reference Manual, (32650-90003); then reenter the
command with the appropriate numeric file code.
---------------------------------------------------------------
255 MESSAGE THE CODE= PARAMETER HAS ONLY ONE SUBPARAMETER.
(CIWARN 255)
CAUSE You have entered what appear to be multiple
subparameters for the CODE keyword; this is not
allowed.
ACTION To review the command syntax, invoke the online
Help Facility or refer to the MPE/iX Commands
Reference Manual, (32650-90003); then reenter the
command with the appropriate CODE parameter.
---------------------------------------------------------------
256 MESSAGE DEVICE= PARAMETER OVERRIDES PREVIOUS DEVICE=
PARAMETER. (CIWARN 256)
CAUSE You have included more than one device parameter in
your command line; the system is warning you that
it is using the last one named.
ACTION If you do not wish the system to use the last
device parameter named in your command line,
reenter the command, omitting the redundancy.
---------------------------------------------------------------
257 MESSAGE THE USER MAY NOT REDEFINE THE DEVICE FOR $STDIN,
$STDINX AND $STDLIST. (CIERR 257)
CAUSE You have attempted to specify a device parameter
for a system defined file; this is not allowed.
ACTION No action is required.
---------------------------------------------------------------
258 MESSAGE UNEXPECTED SPECIAL CHARACTER IN DEVICE NAME.
(CIERR 258)
CAUSE You have entered something in the device name that
the system does not recognize.
ACTION Check your command line for spelling errors.
Review the command syntax, including what device
names are allowed, by invoking the online Help
Facility or referring to the MPE/iX Commands
Reference Manual, (32650-90003); then reenter the
command, specifying an appropriate device name.
---------------------------------------------------------------
259 MESSAGE DS CLASS NAME > 8 CHARACTERS LONG. (CIERR 259)
CAUSE You have entered a DS class name that is longer
than the allowable eight characters.
ACTION Reenter the command, limiting the DS class name to
eight or fewer characters.
---------------------------------------------------------------
260 MESSAGE DEVICE NAME TOO LONG. 63 CHARACTERS IS THE
MAXIMUM. (CIERR 260)
CAUSE You have entered a device name that is longer than
the allowable 63 characters.
ACTION Reenter the command, limiting the device name to 63
or fewer characters.
---------------------------------------------------------------
261 MESSAGE OUTPUT PRIORITY AND/OR NUMBER OF COPIES MAY BE
SPECIFIED ONLY FOR OUTPUT DEVICEFILES. (CIERR 261)
CAUSE You have attempted to specify an output priority
and/or a number of copies for something other than
an output device file; this is not allowed.
ACTION To review the command syntax, invoke the online
Help Facility or refer to the MPE/iX Commands
Reference Manual, (32650-90003); then reenter the
command with the appropriate parameters specified.
---------------------------------------------------------------
262 MESSAGE OUTPUT PRIORITY MUST BE AN INTEGER BETWEEN 1 AND
13. (CIERR 262)
CAUSE You have entered something that the system cannot
accept as an output priority.
ACTION You must specify a positive number between 1 and 13
to indicate the output priority. To review the
command syntax, invoke the online Help Facility or
refer to the MPE/iX Commands Reference Manual,
(32650-90003); then reenter the command with the
appropriate output priority specified.
---------------------------------------------------------------
263 MESSAGE NUMBER OF COPIES MUST BE AN INTEGER BETWEEN 1 AND
127. (CIERR 263)
CAUSE You have entered something that the system cannot
accept as a specification of the number of copies.
ACTION You must specify a positive number between 1 and
127 to indicate the number of copies. To review
the command syntax, invoke the online Help facility
or refer to the MPE/iX Commands Reference Manual,
(32650-90003); then reenter the command with the
appropriate number of copies specified.
---------------------------------------------------------------
264 MESSAGE UNEXPECTED DELIMITER FOUND. DEVICE PARAMETER
SYNTAX IS DEV=[device][,[output priority][,[number
of copies]]] (CIERR 264)
CAUSE You have entered something that the system does not
recognize.
ACTION Check for syntax or spelling errors and reenter the
command. For more information about the command
syntax, invoke the online Help Facility or refer
to the MPE/iX Commands Reference Manual,
(32650-90003).
---------------------------------------------------------------
265 MESSAGE DISK PARAMETER OVERRIDES PREVIOUS DISK PARAMETER.
(CIWARN 265)
CAUSE You have included more than one disk parameter in
your command line; the system is warning you that
it is using the last one named.
ACTION If you do not wish the system to use the last disk
parameter named in your command line, reenter the
command, omitting the redundancy.
---------------------------------------------------------------
266 MESSAGE NUMBER OF RECORDS MUST BE BETWEEN 1 AND
2147483647. (CIERR 266)
CAUSE You have specified a number that is outside the
acceptable range of 1 to 2147483647.
ACTION Reenter the command, being sure to keep the number
of records between 1 and 2147483647.
---------------------------------------------------------------
267 MESSAGE NUMBER OF EXTENTS MUST BE AN INTEGER BETWEEN 1
AND 32. (CIERR 267)
CAUSE You have entered something that the system cannot
accept as a specification of the number of extents.
You must specify an integer between 1 and 32.
ACTION Reenter the command, specifying an acceptable
number of extents. To review the command syntax,
invoke the online Help Facility or refer to the
MPE/iX Commands Reference Manual, (32650-90003).
---------------------------------------------------------------
268 MESSAGE NUMBER OF INITIALLY ALLOCATED EXTENTS MUST BE AN
INTEGER BETWEEN 1 AND !. (CIERR 268)
---------------------------------------------------------------
269 MESSAGE UNEXPECTED DELIMITER. SYNTAX OF DISK PARAMETER
IS DISC=[ # of logical records][,[# of extents][,[#
extents allocated]]] (CIERR 269)
CAUSE You have entered something that the system does not
recognize.
ACTION Check for syntax or spelling errors and reenter the
command. For more information about the command
syntax, invoke the online Help Facility or refer
to the MPE/iX Commands Reference Manual,
(32650-90003).
---------------------------------------------------------------
270 MESSAGE REC PARAMETER OVERRIDES PREVIOUS REC PARAMETER.
(CIWARN 270)
CAUSE You have included more than one REC parameter in
your command line; the system is warning you that
it is using the last one named.
ACTION If you do not wish the system to use the last one
named in your command line, reenter the command,
omitting the redundancy.
---------------------------------------------------------------
271 MESSAGE INVALID RECSIZE VALUE, EXPECT NON-ZERO INTEGER.
(CIERR 271)
CAUSE You have specified a record size value of zero;
this is not allowed.
ACTION Reenter the command, specifying an appropriate
integer for the record size. To review the command
syntax, invoke the online Help Facility or refer
to the MPE/iX Commands Reference Manual,
(32650-90003).
---------------------------------------------------------------
272 MESSAGE BLOCKING FACTOR MUST BE INTEGER BETWEEN 1 AND
255. (CIERR 272)
CAUSE You have entered something that the system does not
recognize as a blocking factor. Your blocking
factor must be an integer between 1 and 255.
ACTION Reenter the command, specifying an appropriate
blocking factor. To review the command syntax,
invoke the online Help Facility or refer to the
MPE/iX Commands Reference Manual, (32650-90003).
---------------------------------------------------------------
273 MESSAGE EXPECTED RECORD FORMAT OF F, V OR U. (CIERR 273)
CAUSE You have entered an unacceptable record format.
The record format must be F, V, or U.
ACTION Reenter the command, specifying an acceptable
record format.
---------------------------------------------------------------
274 MESSAGE EXPECTED "ASCII" OR "BINARY". (CIERR 274)
CAUSE You have entered something that the system does not
recognize, where either ASCII or BINARY was
expected.
ACTION Review the command syntax by invoking the online
Help Facility or referring to the MPE/iX Commands
Reference Manual, (32650-90003); then reenter the
command with the correct specifications.
---------------------------------------------------------------
275 MESSAGE UNEXPECTED DELIMITER. SYNTAX OF REC= PARAMETER
IS
REC=[record size][,[blocking
factor][,[F/V/U][,[ASCII/BINARY]]]] (CIERR 275)
CAUSE You have entered something that the system does not
recognize as a value for the REC parameter.
ACTION Check for syntax or spelling errors and reenter the
command. For more information about the command
syntax, invoke the online Help Facility or refer
to the MPE/iX Commands Reference Manual,
(32650-90003).
---------------------------------------------------------------
276 MESSAGE FILE COMMAND TABLE FULL, UNABLE TO ENTER FILE
COMMAND. (CIERR 276)
---------------------------------------------------------------
277 MESSAGE EXPECTED ";" OR CARRIAGE RETURN. "," WOULD IMPLY
ILLEGAL ATTEMPT TO SPECIFY FILE DOMAIN. (CIERR
277)
CAUSE You entered a comma where the system expected
either a semicolon or a carriage return. The comma
suggests that you tried to specify a file domain,
which is not allowed in this instance.
ACTION Check for syntax or spelling errors and reenter the
command. For more information about the command
syntax, invoke the online Help Facility or refer
to the MPE/iX Commands Reference Manual,
(32650-90003).
---------------------------------------------------------------
278 MESSAGE EXPECTED ";" OR CARRIAGE RETURN. "=" WOULD IMPLY
ILLEGAL ATTEMPT TO SPECIFY AN ACTUAL FILE
DESIGNATOR. (CIERR 278)
CAUSE You entered an equal sign where the system expected
either a semicolon or a carriage return. The
equals sign suggests that you tried to specify an
actual file designator, which is not allowed in
this instance.
ACTION Check for syntax or spelling errors and reenter the
command. For more information about the command
syntax, invoke the online Help Facility or refer
to the MPE/iX Commands Reference Manual,
(32650-90003).
---------------------------------------------------------------
279 MESSAGE BUILD OF FILE ! FAILED. (CIERR 279)
CAUSE The specified file was not built as requested.
ACTION Look for accompanying error messages. If none,
check for syntax or spelling errors and reenter the
command. For more information about the command
syntax, invoke the online Help Facility or refer
to the MPE/iX Commands Reference Manual,
(32650-90003).
---------------------------------------------------------------
280 MESSAGE EXPECTED AN INTEGER BETWEEN 0 AND 12 AS THE
MONTH. (CIERR 280)
CAUSE You have entered something that the system does not
recognize as a specification of the month. You
must enter an integer from 0 to 12.
ACTION To review the command syntax, invoke the online
Help Facility or refer to the MPE/iX Commands
Reference Manual, (32650-90003); then reenter the
command with the correct month specification.
---------------------------------------------------------------
281 MESSAGE EXPECTED A "/" BETWEEN THE MONTH AND THE DAY.
(CIERR 281)
CAUSE You have not followed the correct syntax for
entering the date.
ACTION Check for syntax or spelling errors and reenter the
command. For more information about the command
syntax, invoke the online Help Facility or refer
to the MPE/iX Commands Reference Manual,
(32650-90003).
---------------------------------------------------------------
282 MESSAGE EXPECTED A DAY NUMBER BETWEEN 1 AND !. (CIERR
282)
CAUSE You have entered a "day" number that the system
will not accept.
ACTION Check for syntax or spelling errors and reenter the
command. For more information about the command
syntax, invoke the online Help Facility or refer
to the MPE/iX Commands Reference Manual,
(32650-90003).
---------------------------------------------------------------
283 MESSAGE IF MONTH IS 0, DAY MUST BE 0. (CIERR 283)
CAUSE You have specified the month as zero; therefore,
the system expects the day and year to be zero as
well.
ACTION To review the command syntax, invoke the online
Help Facility or refer to the MPE/iX Commands
Reference Manual, (32650-90003); then reenter the
command with the day specified correctly.
---------------------------------------------------------------
284 MESSAGE EXPECTED A "/" BETWEEN THE DAY AND THE YEAR.
(CIERR 284)
CAUSE You have not followed the correct syntax for
entering the date.
ACTION Check for syntax or spelling errors and reenter the
command. For more information about the command
syntax, invoke the online Help Facility or refer
to the MPE/iX Commands Reference Manual,
(32650-90003).
---------------------------------------------------------------
285 MESSAGE IF MONTH AND DAY ARE 0, YEAR MUST BE 0. (CIERR
285)
CAUSE You have specified the month and day as zero;
therefore, the system expects the year to be zero
as well.
ACTION To review the command syntax, invoke the online
Help Facility or refer to the MPE/iX Commands
Reference Manual, (32650-90003); then reenter the
command with the year specified correctly.
---------------------------------------------------------------
286 MESSAGE EXTRANEOUS PARAMETER TO EXPIRATION DATE. (CIERR
286)
CAUSE You have entered something that the system does not
recognize as part of the expiration date.
ACTION Check for syntax or spelling errors and reenter the
command. For more information about the command
syntax, invoke the online Help Facility or refer
to the MPE/iX Commands Reference Manual,
(32650-90003).
---------------------------------------------------------------
287 MESSAGE LABEL= REDUNDANTLY SPECIFIED. LAST LABEL USED.
(CIERR 287)
CAUSE You have included more than one label specification
in your command line; the system is warning you
that it is using the last one named.
ACTION If you do not wish the system to use the last one
named in your command line, reenter the command,
omitting the redundancy.
---------------------------------------------------------------
288 MESSAGE VOLUME ID LENGTH LIMITED TO 6 CHARACTERS. (CIERR
288)
CAUSE You have specified a volume ID that is longer than
six characters; this is not allowed.
ACTION Reenter your command, specifying a volume ID of six
or fewer characters.
---------------------------------------------------------------
289 MESSAGE EMBEDDED SPECIAL CHARACTERS NOT ALLOWED IN VOLUME
ID. (CIERR 289
CAUSE You have entered something that the system does not
recognize in your volume ID specification.
ACTION Check for syntax or spelling errors and reenter the
command. For more information about the command
syntax, invoke the online Help Facility or refer
to the MPE/iX Commands Reference Manual,
(32650-90003).
---------------------------------------------------------------
290 MESSAGE VOLUME TYPE MUST BE "ANS" OR "IBM". (CIERR 290)
CAUSE You have specified an unacceptable volume type; the
type must be either ANS or IBM.
ACTION Reenter the command, specifying an appropriate
volume type. To review the command syntax, invoke
the online Help Facility or refer to the MPE/iX
Commands Reference Manual, (32650-90003).
---------------------------------------------------------------
291 MESSAGE EXPECTED "NEXT", "ADDF" OR A FOUR DIGIT NUMBER AS
THE SEQUENCE FIELD. (CIERR 291)
CAUSE You have entered something that the system does not
recognize as an acceptable sequence specification.
The system expected NEXT, ADDF, or a number.
ACTION Reenter the command, specifying an appropriate
sequence. To review the command syntax, invoke the
online Help Facility or refer to the MPE/iX
Commands Reference Manual, (32650-90003).
---------------------------------------------------------------
292 MESSAGE EXTRANEOUS PARAMETER TO THE LABEL KEYWORD.
(CIERR 292)
CAUSE You have entered something that the system does not
recognize in the LABEL parameter.
ACTION Check for syntax or spelling errors and reenter the
command. For more information about the command
syntax, invoke the online Help Facility or refer
to the MPE/iX Commands Reference Manual,
(32650-90003).
---------------------------------------------------------------
293 MESSAGE FORMS MESSAGE REDUNDANTLY SPECIFIED. LAST
MESSAGE USED. (CIERR 293)
CAUSE You have included more than one forms message in
your command line; the system is warning you that
it is using the last one named.
ACTION If you do not wish the system to use the last one
named in your command line, reenter the command,
omitting the redundancy.
---------------------------------------------------------------
294 MESSAGE FORMS MESSAGE MUST BE TERMINATED WITH A PERIOD.
(CIERR 294)
CAUSE You have left off a closing period in your forms
message.
ACTION Reenter the command, adding a period at the end of
the forms message.
---------------------------------------------------------------
295 MESSAGE FORMS MESSAGE TRUNCATED TO 49 CHARACTERS.
(CIWARN 295)
CAUSE Your forms message was longer than the 49
characters allowed; the system has deleted all
characters after the 49th.
ACTION If you do not want those characters deleted,
reenter the command with a shorter message
specified. To review the command syntax, invoke
the online Help Facility or refer to the MPE/iX
Commands Reference Manual, (32650-90003).
---------------------------------------------------------------
296 MESSAGE NOLABEL OVERRIDES PREVIOUS LABEL. (CIWARN 296)
CAUSE You have specified NOLABEL and the system is
warning you that your specification of LABEL
earlier in the command line is being overridden.
ACTION No action is required, unless you actually want to
specify LABEL rather than NOLABEL, in which case
you must reenter the command, omitting the NOLABEL
specification.
---------------------------------------------------------------
297 MESSAGE NOLOCK OVERRIDES PREVIOUS LOCK. (CIWARN 297)
CAUSE You have specified NOLOCK and the system is warning
you that your specification of LOCK earlier in the
command line is being overridden.
ACTION No action is required, unless you actually want to
specify LOCK rather than NOLOCK, in which case you
must reenter the command, omitting the NOLOCK
specification.
---------------------------------------------------------------
298 MESSAGE LOCK OVERRIDES PREVIOUS NOLOCK. (CIWARN 298)
CAUSE You have specified LOCK and the system is warning
you that your specification of NOLOCK earlier in
the command line is being overridden.
ACTION No action is required, unless you actually want to
specify NOLOCK rather than LOCK, in which case you
must reenter the command, omitting the LOCK
specification.
---------------------------------------------------------------
299 MESSAGE UNKNOWN KEYWORD FOR BUILD COMMAND. (CIERR 299)
CAUSE You have entered something that the system does not
recognize.
ACTION Check for syntax or spelling errors and reenter the
command. For more information about the command
syntax, invoke the online Help Facility or refer
to the MPE/iX Commands Reference Manual,
(32650-90003).
---------------------------------------------------------------