HP 3000 Manuals HP 3000 Manuals
Chapter 7 Directory Traversal Subsystem
(Subsystem 519)
--------------------------------------------------------------
This section presents the error messages for the Directory Traversal
Subsystem (519).
[REV BEG]
---------------------------------------------------------------
1 MESSAGE Undefined error.
CAUSE An error occurred that is not translated by the
DIRT subsystem.
ACTION Set break point at DIRT.HANDLE_ERROR and look at
the stack trace to see which subsystem is
generating the error in the first place.
---------------------------------------------------------------
31 MESSAGE DIRT cannot go beyond PX_MAX_LEVEL (PX_PATH_MAX
div 2) levels. The levels are counted from / and
CWD depending on whether the path_ptr^ is absolute
of relative path name.
CAUSE DIRT's internal limitation due to using arrays of
fixed size.
ACTION Either you can continue traversing at least other
directories that are not that deep (error function
returns TRUE) or you can change the CWD to a lower
level directory and continue search from there.
---------------------------------------------------------------
32 MESSAGE DIRT cannot return a filename longer than
PX_PATH_MAX bytes.
CAUSE During the traversal of the directory, DIRT
encountered a file whose pathname would exceed
PX_PATH_MAX bytes.
ACTION Either you can skip this name (error function
returns TRUE) or you can change the CWD to a lower
level directory and continue search from there.
---------------------------------------------------------------
33 MESSAGE Path_ptr^ contains a name in MPE structure but
name length exceeds 16 characters.
CAUSE Names directly under /, MPE account, MPE group
cannot exceed 16 characters.
ACTION Pass a correct path_ptr^.
---------------------------------------------------------------
61 MESSAGE Error during HPDIRREAD.
CAUSE DIRT called HPDIRREAD and encountered unexpected
error.
ACTION Set a break point at DIRT.HANDLE_ERROR and look at
the stack trace to see what error is being
generated by HPDIRREAD.
---------------------------------------------------------------
91 MESSAGE Undefined error while using directory services.
CAUSE DIRT called some directory services and encountered
unexpected error.
ACTION Set a break point at DIRT.HANDLE_ERROR and look at
the stack trace to see what error is being
generated by directory services.
---------------------------------------------------------------
92 MESSAGE A component of the path does not exist.
CAUSE A component of the path_ptr^ does not exist.
ACTION Check the path_ptr^ and try again.
---------------------------------------------------------------
93 MESSAGE A component of the path is not a directory.
CAUSE A component of the path_ptr^ exists but is not a
directory.
ACTION Check the path_ptr^ and try again.
---------------------------------------------------------------
94 MESSAGE User lacks TD access.
CAUSE User lacks TD access on a directory in the path.
ACTION Either give user the TD access or tell user about
the security violation.
---------------------------------------------------------------
95 MESSAGE The last component of the path does not exist.
CAUSE The last component of the path_ptr^ does not exist.
ACTION Check the path_ptr^ and try again.
---------------------------------------------------------------
96 MESSAGE Internal security error.
CAUSE Unknown. DIRT was using some security service
while the error occurred.
ACTION Set a break point at DIRT.HANDLE_ERROR and look at
the stack trace to see what error is being
generated by security.
---------------------------------------------------------------
121 MESSAGE Error while calling HPFOPEN.
CAUSE Unknown. DIRT was calling HPFOPEN when the error
occurred.
ACTION Set a break point at DIRT.HANDLE_ERROR and look at
the stack trace to see what error is being
generated by HPFOPEN.
---------------------------------------------------------------
122 MESSAGE Security violation during HPFOPEN, failed to open
a directory.
CAUSE User lacks appropriate access to HPFOPEN the
directory.
ACTION Check if the user has RD access on the directory.
---------------------------------------------------------------
123 MESSAGE Too many file already open, failed to open a
directory.
CAUSE The user has too many files already open.
ACTION Close the files/directories opened prior to calling
DIRT. It is also possible that there are too many
directories being opened by DIRT itself. In such a
case change CWD to a lower level and try again.
---------------------------------------------------------------
124 MESSAGE The directory has been opened exclusively by
someone else.
CAUSE DIRT is trying to HPFOPEN a directory that is
opened exclusively by someone else.
ACTION Wait for the other process to close the directory
or skip this directory by error function returning
TRUE.
---------------------------------------------------------------
125 MESSAGE The UFID of the directory is a bad one.
CAUSE It is possible that there is directory corruption.
Also, it is possible that the directory has been
purged by someone else in a small time window (not
a bug - just that state of the dir has changed).
ACTION If it is the first reason, run FSCHECK to see if
everything is ok. If it is the second reason,
don't worry and just skip this directory.
---------------------------------------------------------------
156 MESSAGE The filter supplied to DIRT is not correct.
CAUSE The filter_ptr^ is not correct syntactically.
ACTION Check the filter_ptr^ and try again.
---------------------------------------------------------------
157 MESSAGE The path supplied to DIRT is not correct.
\CAUSE\ The path_ptr^ is not correct syntactically.
ACTION Check the path_ptr^ and try again.
---------------------------------------------------------------
161 MESSAGE Error occurred while calling Genfxlate.
CAUSE Error occurred while calling Genfxlate.
ACTION Check the MPE syntax path_ptr^ and try again.
---------------------------------------------------------------
162 MESSAGE Genfxlate found group component of name doesn't
exist or is a dir.
CAUSE MPE syntax path_ptr^ has a non-existent group or is
a directory.
ACTION Check the MPE syntax path_ptr^ and try again.
---------------------------------------------------------------
163 MESSAGE Genfxlate found account component of name doesn't
exist or is a dir.
CAUSE MPE syntax path_ptr^ has a non-existent account or
is a directory.
ACTION Check the MPE syntax path_ptr^ and try again.
---------------------------------------------------------------[REV END]