HP 3000 Manuals HP 3000 Manuals
(CIERR) (contd.)
10302 MESSAGE WHILE'S AND ENDWHILE'S MUST BE PAIRED WITHIN USER
COMMANDS. (CIERR 10302)
---------------------------------------------------------------
10303 MESSAGE THIS ENDWHILE COMMAND DOES NOT HAVE A
CORRESPONDING WHILE. THE ENDWHILE IS IGNORED.
(CIWARN 10303)
CAUSE You supplied an ENDWHILE without having specified a
WHILE.
ACTION No action is reuired, unless you meant to place a
loop construct arround a set of commands preceeding
the WHILE.
---------------------------------------------------------------
10304 MESSAGE I/O READ ERROR IN WHILE COMMANDS INTERACTIVELY.
(CIERR 10304)
CAUSE Unknown.
ACTION Reenter the command. If it fails consistently,
consult with your system manager or support
representative.
---------------------------------------------------------------
10305 MESSAGE ERROR WRITING WHILE COMMANDS TO STORAGE AREA.
(CIERR 10305)
CAUSE Unknown.
ACTION Reenter the command. If it fails consistently,
consult with your system manager or support
representative.
---------------------------------------------------------------
10306 MESSAGE HIT MAXIMUM LOOPING LEVEL OF WHILE CONSTRUCT.
(CIERR 10306)
---------------------------------------------------------------
10307 MESSAGE NO WHILE COMMAND FOR ENDWHILE. (CIERR 10307)
---------------------------------------------------------------
10308 MESSAGE HIT MAXIMUM STACK LIMIT FOR LANGUAGE CONSTRUCTS.
(CIERR 10308)
---------------------------------------------------------------
10310 MESSAGE ERROR EXECUTING COMMANDS IN WHILE LOOP. (CIERR
10310)
CAUSE This general error is displayed when an error is
caused by a command that is enclosed within a
WHILE-ENDWHIL loop. If there are nested
WHILEs, this error will be produced for each
WHILE-ENDWHILE.
ACTION Examine the error that was displayed before this
error was produced. Reenter the command.
---------------------------------------------------------------
10311 MESSAGE HIT MAXIMUM NESTING LEVEL FOR CURRENT WHILE.
(CIERR 10311)
---------------------------------------------------------------
10312 MESSAGE WHILE TERMINATED ON READ OF LOOPED COMMANDS.
(CIERR 10312)
---------------------------------------------------------------
10313 MESSAGE CAN NOT PARSE WHILE COMMAND LINE. (CIERR 10313)
---------------------------------------------------------------
10314 MESSAGE NESTED WHILES ARE NOT AVAILABLE AT THIS TIME.
(CIERR 10314)
---------------------------------------------------------------
10315 MESSAGE SYNTAX OF WHILE COMMAND IS "WHILE &<CONDITION>".
(CIERR 10315)
CAUSE Evidently, you entered a WHILE but did not follow
it with a condition.
ACTION Reenter the WHILE and supply a condition to it.
---------------------------------------------------------------
10316 MESSAGE CAN NOT SUBSTITUTE OR LIST WHILE COMMAND LINE.
(CIERR 10316)
CAUSE Unknown.
ACTION Reenter the command. If it fails consistently,
consult with your system manager or support
representative.
---------------------------------------------------------------
10317 MESSAGE UNRECOGNIZED PARAMETERS TO THE WHILE COMMAND
(CIERR 10317)
---------------------------------------------------------------
10600 MESSAGE PRIVATE VOLUMES FACILITY NOT INVOKED. (CIERR
10600)
---------------------------------------------------------------
10601 MESSAGE OPERATOR REJECTED RESERVE REQUEST. (CIERR 10601)
---------------------------------------------------------------
10602 MESSAGE GROUP IN VOLUME SET SPECIFICATION DOES NOT EXIST.
(CIERR 10602)
CAUSE A non existent group in volume set was entered.
ACTION Verify existence of group and volume set specified.
---------------------------------------------------------------
10603 MESSAGE ACCOUNT IN VOLUME SET SPECIFICATION DOES NOT
EXIST. (CIERR 10603)
CAUSE A non existent account in volume set was entered.
ACTION Verify existence of account and volume set
specified.
---------------------------------------------------------------
10604 MESSAGE VOLUME SET IS NOT PHYSICALLY MOUNTED ON SYSTEM.
(CIERR 10604)
CAUSE Volume set configured, but not mounted.
ACTION Mount volume set.
---------------------------------------------------------------
10605 MESSAGE VOLUME SET CURRENTLY MOUNTED WITH DIFFERENT
GENERATION. (CIERR 10605)
---------------------------------------------------------------
10606 MESSAGE MOUNTED VOLUME TABLE ERROR (SYSTEM PROBLEM).
(CIERR 10606)
---------------------------------------------------------------
10607 MESSAGE LDEV# ! IS NOT A DISC. (CIERR 10607)
CAUSE Specified logical device is not a configured disk
drive.
ACTION Verify logical device numbers of disk drives.
---------------------------------------------------------------
10608 MESSAGE LDEV ! IS NOT IN VOLUME TABLE -- TRY SWITCHING
DISK UNIT OFFLINE, THEN ONLINE. (CIERR 10608)
CAUSE Logical device number cannot be found in volume
table.
ACTION Switch disk offline, then online. (Then reboot
system.)10620
---------------------------------------------------------------
10609 MESSAGE CLOSE PENDING ON VOLUME SET. (CIERR 10609)
CAUSE There is an outstanding close on the volume set.
ACTION Open volume set or wait for close to complete.
---------------------------------------------------------------
10610 MESSAGE VOLUME SET IS CLOSED. (CIERR 10610)
CAUSE Volume set has been closed.
ACTION Open volume set if desired.
---------------------------------------------------------------
10611 MESSAGE VOLUME SET NAME GREATER THAN 32 CHARACTERS.
(CIERR 10611)
CAUSE Volume set name specified exceeds 32 character
maximum.
ACTION Verify volume set name and reenter.
---------------------------------------------------------------
10612 MESSAGE MOUNTABLE VOLUMES FACILITY DISABLED BY OPERATOR.
(CIERR 10612)
---------------------------------------------------------------
10613 MESSAGE UNABLE TO OBTAIN MASTER VOLUME ID. (CIERR 10613)
---------------------------------------------------------------
10614 MESSAGE UNABLE TO OBTAIN MAGIC UFID FOR SPECIAL RESERVE
FILE. (CIERR 10614)
---------------------------------------------------------------
10615 MESSAGE UNABLE TO OPEN SPECIAL RESERVE FILE. (CIERR
10615)
---------------------------------------------------------------
10616 MESSAGE SEND MSG TO SYSTEM PROCESS (AVR) FAILED. (CIERR
10616)
---------------------------------------------------------------
10617 MESSAGE RECEIVE MSG FROM SYSTEM PROCESS (AVR) FAILED.
(CIERR 10617)
---------------------------------------------------------------
10618 MESSAGE SYSTEM PROCESS (AVR) UNABLE TO OPEN SPECIAL
RESERVE FILE. (CIERR 10618)
---------------------------------------------------------------
10619 MESSAGE FWRITE FAILURE DURING INFORMATION DISPLAY. (CIERR
10619)
---------------------------------------------------------------
10620 MESSAGE ERROR OCCURRED GATHERING DSTAT INFORMATION.
(CIERR 10620)
CAUSE Problem with DSTAT command information processing.
ACTION Reboot; document circumstances; verify DSTAT
command now works properly.
---------------------------------------------------------------
10621 MESSAGE USER DOES NOT HAVE VOLUME SET RESERVED. (CIERR
10621)
---------------------------------------------------------------
10622 MESSAGE VSRESERVESYS (OR LMOUNT) ALREADY ISSUED ON VOLUME
SET. (CIERR 10622)
CAUSE Command has already been issued on volume set.
ACTION None.
---------------------------------------------------------------
10623 MESSAGE VSRESERVE (OR MOUNT) ALREADY ISSUED ON VOLUME
SET. (CIERR 10623)
CAUSE Command has already been issued on volume set.
ACTION None.
---------------------------------------------------------------
10624 MESSAGE ERROR OBTAINING USER INFORMATION. (CIERR 10624)
CAUSE Unknown.
---------------------------------------------------------------
10625 MESSAGE NO VOLUME SETS CURRENTLY RESERVED. (CIERR 10625)
---------------------------------------------------------------
10626 MESSAGE VOLSET COMPONENT OF NAME > 8 CHARACTERS. (CIERR
10626)
CAUSE VOLSET name specified exceeded 8 characters.
ACTION Verify correct volume set name of less than 9
characters.
---------------------------------------------------------------
10627 MESSAGE GROUP COMPONENT OF NAME > 8 CHARACTERS. (CIERR
10627)
CAUSE Group names cannot exceed eight characters;
evidently, you entered more than eight characters
for a group name.
ACTION Reenter the command and supply a group name that is
up to eight characters long.
---------------------------------------------------------------
10628 MESSAGE ACCOUNT COMPONENT OF NAME > 8 CHARACTERS. (CIERR
10628)
CAUSE Account names cannot exceed eight characters;
evidently, you entered more than eight characters
for an account name.
ACTION Reenter the command and supply an account name that
is up to eight characters long.
---------------------------------------------------------------
10629 MESSAGE UNABLE TO CLOSE SPECIAL RESERVE FILE. (CIERR
10629)
CAUSE Unknown.
---------------------------------------------------------------
10630 MESSAGE SYSTEM PROCESS (AVR) UNABLE TO CLOSE SPECIAL
RESERVE FILE. (CIERR 10630)
CAUSE Unknown.
---------------------------------------------------------------
10631 MESSAGE INVALID NUMERIC VALUE FOR KEYWORD PARAMETER.
(CIERR 10631)
CAUSE An invalid numeric value was entered for the
parameter used.
ACTION Verify valid, available numeric values.
---------------------------------------------------------------
10632 MESSAGE VOLUME SET IS ALREADY OPEN. (CIERR 10632)
CAUSE An attempt was made to open an already open volume
set.
ACTION None.
---------------------------------------------------------------
10633 MESSAGE VOLUME SET IS ALREADY CLOSED. (CIERR 10633)
CAUSE An attempt was made to close a volume set that is
already closed.
ACTION None.
---------------------------------------------------------------
10634 MESSAGE VSRESERVESYS (OR LMOUNT) IS IN EFFECT ON VOLUME
SET. (CIERR 10634)
---------------------------------------------------------------
10635 MESSAGE VOLUME SET OPEN IN PROGRESS. (CIERR 10635)
---------------------------------------------------------------
10636 MESSAGE VOLUME SET CLOSE IN PROGRESS. (CIERR 10636)
---------------------------------------------------------------
10637 MESSAGE VOLUME SET IN USE, CLOSE PENDING APPLIED TO
VOLUME SET. (CIERR 10637)
CAUSE A volume set CLOSE command was issued and volume
set specified is currently in use.
ACTION Wait for CLOSE to complete, or OPEN the volume set
specified.
---------------------------------------------------------------
10639 MESSAGE SPLIT CAN ONLY BE SPECIFIED FOR A MIRRORED VOLUME
SET. (CIERR 10639)
CAUSE The SPLIT option to VSCLOSE was specified for a
non-mirrored volume set.
ACTION Use the SPLIT option only for a mirrored volume
set.
---------------------------------------------------------------