HP 3000 Manuals HP 3000 Manuals
Chapter 2 Command Interpreter
(CIERR)
--------------------------------------------------------------
11 MESSAGE PROGRAMMATIC EXECUTION OF THIS COMMAND HAS BEEN
DISABLED. (CIERR 11)
CAUSE The command in question may not be executed
programatically.
ACTION See your system manager.
---------------------------------------------------------------
12 MESSAGE COMMAND NOT PROGRAMMATICALLY EXECUTABLE. (CIERR
12)
CAUSE The command in question may not be executed
programatically.
ACTION There is no way at present to change this
characteristic. If you feel that this is something
you need, you may wish to inform your system
manager or support representative.
---------------------------------------------------------------
13 MESSAGE COMMAND NOT TERMINATED BY CARRIAGE RETURN.
(CIERR 13)
CAUSE Somehow the system has attempted to execute your
command line without your having pressed the
carriage return key.
ACTION Reenter your command; be sure you press the return
key at the end of your command.
---------------------------------------------------------------
14 MESSAGE PARAMETER EXCEEDS 255 CHARACTERS. (CIERR 14)
CAUSE One of your command parameters contains more than
255 characters, which is the maximum allowed.
ACTION Reenter your command; be sure none of your
parameters exceeds 255 characters.
---------------------------------------------------------------
80 MESSAGE CAN'T INITIATE NEW SESSIONS NOW. (CIERR 80)
CAUSE This may mean that the maximum number of users are
currently logged on; or, it may mean that your
system management is doing something on the system
that requires all users to be logged off.
ACTION You can wait a while and try again later; if you
get this message again, contact your system
operator for assistance.
---------------------------------------------------------------
81 MESSAGE STACK TOO SMALL FOR STREAM COMMAND TO BEGIN
PROCESSING. (CIERR 81)
---------------------------------------------------------------
82 MESSAGE STREAM FACILITY NOT ENABLED: SEE OPERATOR.
(CIERR 82)
CAUSE Apparently your system management has disallowed
the use of the STREAM command.
ACTION See your system operator or system manager.
---------------------------------------------------------------
83 MESSAGE STREAM FILE MUST BE OF TYPE ASCII. (CIERR 83)
CAUSE You have attempted to stream a job file that is not
written in ASCII code.
ACTION The only way you can stream your job is to be sure
it is written in ASCII code.
---------------------------------------------------------------
84 MESSAGE RECORD LENGTH OF STREAM FILE MUST BE LESS THAN
256 BYTES. (CIERR 84)
CAUSE At least one of the records in your job file is
longer than the 255 bytes allowed by the system.
ACTION Edit your job file to ensure that no record is
longer than 255 characters.
---------------------------------------------------------------
86 MESSAGE CAN'T INITIATE NEW SESSIONS NOW DUE TO
INSUFFICIENT DISK SPACE. (CIERR 86)
CAUSE The system has run out of disk space and cannot
allow any more users to log on.
ACTION Discuss the problem with your system manager.
---------------------------------------------------------------
118 MESSAGE LDEV #/ MODEM PORT IS INCORRECTLY CONFIGURED ON
SYSTEM. CONNECTION REFUSED.
---------------------------------------------------------------
101 MESSAGE LISTFILE SELEQS MAY ONLY SELECT ON FTYPE. (CIERR
101)
---------------------------------------------------------------
102 MESSAGE LISTFILE SELEQS MAY ONLY SELECT USING EQUALITY.
(CIERR 102)
---------------------------------------------------------------
103 MESSAGE LISTFILE SELEQS MAY ONLY SELECT ON ONE PARAMETER.
(CIERR 103)
---------------------------------------------------------------
104 MESSAGE LISTFILE FTYPE VALUE IS UNKNOWN. USE KSAMXL OR
SPOOL. (CIERR 104)
---------------------------------------------------------------
105 MESSAGE LISTFILE PASS OPTION NOT VALID WITH THIS FORMAT.
(CIWARN 105)
---------------------------------------------------------------
106 MESSAGE LISTFILE LEVEL MUST BE -1, 0 TO 7, OR FORMAT
NAME. (CIWARN 106)
---------------------------------------------------------------
110 MESSAGE MISSING GROUP, LOGON ABORTED. (CIERR 110)
---------------------------------------------------------------
111 MESSAGE MISSING ACCOUNT, LOGON ABORTED. (CIERR 111)
---------------------------------------------------------------
112 MESSAGE MISSING USER, LOGON ABORTED. (CIERR 112)
---------------------------------------------------------------
113 MESSAGE MISSING HOME GROUP, LOGON ABORTED. (CIERR 113)
---------------------------------------------------------------
130 MESSAGE EMPTY CHARACTER CLASS IN FILE NAME. (CIERR 130)
---------------------------------------------------------------
131 MESSAGE CHARACTER CLASS RANGE "(ALPHABETIC-NUMERIC)" IN
FILE NAME. (CIERR 131)
---------------------------------------------------------------
132 MESSAGE CHARACTER CLASS RANGE "(NUMERIC-ALPHABETIC)" IN
FILE NAME. (CIERR 132)
---------------------------------------------------------------
133 MESSAGE CHARACTER CLASS RANGE WITHOUT STARTING CHARACTER
IN FILE NAME. (CIERR 133)
---------------------------------------------------------------
134 MESSAGE CHARACTER CLASS RANGE WITHOUT CLOSING CHARACTER
IN FILE NAME. (CIERR 134)
---------------------------------------------------------------
135 MESSAGE NON-ALPHANUMERIC CHARACTER CLASS FOUND IN FILE
NAME. (CIERR 135)
---------------------------------------------------------------
136 MESSAGE CHARACTER CLASS MISSING CLOSING ')' FOUND IN FILE
NAME. (CIERR 136)
---------------------------------------------------------------
137 MESSAGE CHARACTER CLASS NOT ALLOWED IN FILE NAME. (CIERR
137)
---------------------------------------------------------------
140 MESSAGE EMPTY CHARACTER CLASS IN GROUP NAME. (CIERR
140)
---------------------------------------------------------------
141 MESSAGE CHARACTER CLASS RANGE "(ALPHABETIC-NUMERIC)" IN
GROUP NAME. (CIERR 141)
---------------------------------------------------------------
142 MESSAGE CHARACTER CLASS RANGE "(NUMERIC-ALPHABETIC)" IN
GROUP NAME. (CIERR 142)
---------------------------------------------------------------
143 MESSAGE CHARACTER CLASS RANGE WITHOUT STARTING CHARACTER
IN GROUP NAME. (CIERR 143)
---------------------------------------------------------------
144 MESSAGE CHARACTER CLASS RANGE WITHOUT CLOSING CHARACTER
IN GROUP NAME. (CIERR 144)
---------------------------------------------------------------
145 MESSAGE NON-ALPHANUMERIC CHARACTER CLASS FOUND IN GROUP
NAME. (CIERR 145)
---------------------------------------------------------------
146 MESSAGE CHARACTER CLASS MISSING CLOSING ')' FOUND IN
GROUP NAME. (CIERR 146)
---------------------------------------------------------------
147 MESSAGE CHARACTER CLASS NOT ALLOWED IN GROUP NAME.
(CIERR 147)
---------------------------------------------------------------
150 MESSAGE EMPTY CHARACTER CLASS IN ACCOUNT NAME. (CIERR
150)
---------------------------------------------------------------
151 MESSAGE CHARACTER CLASS RANGE "(ALPHABETIC-NUMERIC)" IN
ACCOUNT NAME. (CIERR 151)
---------------------------------------------------------------
152 MESSAGE CHARACTER CLASS RANGE "(NUMERIC-ALPHABETIC)" IN
ACCOUNT NAME. (CIERR 152)
---------------------------------------------------------------
153 MESSAGE CHARACTER CLASS RANGE WITHOUT STARTING CHARACTER
IN ACCOUNT NAME. (CIERR 153)
---------------------------------------------------------------
154 MESSAGE CHARACTER CLASS RANGE WITHOUT CLOSING CHARACTER
IN ACCOUNT NAME. (CIERR 154)
---------------------------------------------------------------
155 MESSAGE NON-ALPHANUMERIC CHARACTER CLASS FOUND IN ACCOUNT
NAME. (CIERR 155)
---------------------------------------------------------------
156 MESSAGE CHARACTER CLASS MISSING CLOSING ')' FOUND IN
ACCOUNT NAME. (CIERR 156)
---------------------------------------------------------------
157 MESSAGE CHARACTER CLASS NOT ALLOWED IN ACCOUNT NAME.
(CIERR 157)
---------------------------------------------------------------
160 MESSAGE EMPTY CHARACTER CLASS IN LOCK WORD. (CIERR 160)
---------------------------------------------------------------
161 MESSAGE CHARACTER CLASS RANGE "(ALPHABETIC-NUMERIC)" IN
LOCK WORD. (CIERR 161)
---------------------------------------------------------------
162 MESSAGE CHARACTER CLASS RANGE "(NUMERIC-ALPHABETIC)" IN
LOCK WORD. (CIERR 162)
---------------------------------------------------------------
163 MESSAGE CHARACTER CLASS RANGE WITHOUT STARTING CHARACTER
IN LOCK WORD. (CIERR 163)
---------------------------------------------------------------
164 MESSAGE CHARACTER CLASS RANGE WITHOUT CLOSING CHARACTER
IN LOCK WORD. (CIERR 164)
---------------------------------------------------------------
165 MESSAGE NON-ALPHANUMERIC CHARACTER CLASS FOUND IN LOCK
WORD. (CIERR 165)
---------------------------------------------------------------
166 MESSAGE CHARACTER CLASS MISSING CLOSING ')' FOUND IN LOCK
WORD. (CIERR 166)
---------------------------------------------------------------
167 MESSAGE CHARACTER CLASS NOT ALLOWED IN LOCK WORD. (CIERR
167)
---------------------------------------------------------------
190 MESSAGE NO FILES MATCH 'SELEQ' FOR ! (CIWARN 190)
---------------------------------------------------------------
199 MESSAGE NO LOCKWORDS ALLOWED IN :FILE FORMAL DESIGNATORS.
(CIERR 199)
CAUSE You have included a lockword in your FILE
statement; this is not allowed.
ACTION Reenter the file equation, leaving out the
lockword. To review the syntax of the FILE
command, invoke the online Help Facility or refer
to the MPE/iX Commands Reference Manual,
(32650-90003).
---------------------------------------------------------------
200 MESSAGE MORE THAN 200 PARAMETERS TO BUILD COMMAND.
(CIERR 200)
CAUSE You have included more than 200 parameters in your
BUILD command; this is not allowed.
ACTION Reenter the BUILD command; limit the number of
parameters to 30 or less. To review the syntax of
this command, invoke the online Help Facility or
refer to the MPE/iX Commands Reference Manual,
(32650-90003).
---------------------------------------------------------------
201 MESSAGE NAME OF FILE TO BE BUILT IS A REQUIRED PARAMETER.
(CIERR 201)
CAUSE You have failed to enter a filename in the BUILD
command.
ACTION Reenter the FILE command, specifying a filename.
To review the syntax of this command, invoke the
online Help Facility or refer to the MPE/iX
Commands Reference Manual, (32650-90003).
---------------------------------------------------------------
202 MESSAGE FILE CODE MISSING, DEFAULTED TO 0. (CIWARN 202)
CAUSE You did not supply a file code value to the
command. System used a default value.
ACTION No action is required, unless the default value is
not what you desired.
---------------------------------------------------------------
203 MESSAGE MORE THAN 200 PARAMETERS TO FILE COMMAND. (CIERR
203)
CAUSE You have included more than 200 parameters in your
FILE command; this is not allowed.
ACTION Reenter the FILE command; limit the number of
parameters to 30 or less. To review the syntax of
this command, invoke the online Help Facility or
refer to the MPE/iX Commands Reference Manual,
(32650-90003).
---------------------------------------------------------------
204 MESSAGE FILE COMMAND REQUIRES AT LEAST TWO PARAMETERS,
INCLUDING THE FORMAL NAME OF THE FILE. (CIERR 204)
CAUSE You have specified less than two parameters in your
FILE statement; a minimum of two is required.
ACTION Reenter the FILE command; specify at least one
parameter in addition to the formal filename. To
review the syntax of this command, invoke the
online Help Facility or refer to the MPE/iX
Commands Reference Manual, (32650-90003).
---------------------------------------------------------------