HP 3000 Manuals HP 3000 Manuals
(CIERR) (contd.)
3833 MESSAGE EXPECTED "," AS TRACE PARAMETER DELIMETER.
(CIERR 3833)
CAUSE Delimiter used between parameters not accepted.
ACTION Check syntax.
---------------------------------------------------------------
3838 MESSAGE IMFCONTROL ERROR ! (CIERR 3838)
CAUSE Interactive mainframe facility control error.
ACTION Call your service representative and give the
IMFCONTROL error number that you received.
---------------------------------------------------------------
3839 MESSAGE COULD NOT OPEN FILE ! , ! (CIERR 3839)
CAUSE File referenced could not be accessed for the
reason shown in the message.
ACTION Check the file.
---------------------------------------------------------------
3840 MESSAGE EXPECTED "START","STOP","KILL",OR "TRACE".
(CIERR 3840)
CAUSE Unexpected command encountered in IMF/3000.
ACTION Check syntax.
---------------------------------------------------------------
3841 MESSAGE EXPECTED " " OR "," AFTER IMF COMMAND NAME.
(CIERR 3841)
CAUSE A missing or incorrect delimiter was encountered.
ACTION Check syntax and reenter the command correctly.
---------------------------------------------------------------
3842 MESSAGE NO BACKREFERENCE ALLOWED FOR IMF CONFIG. FILE.
(CIERR 3842)
CAUSE Unaccepted backreference encountered.
ACTION Check syntax.
---------------------------------------------------------------
3843 MESSAGE INVALID IMF CONFIGURATION FILE. (CIERR 3843)
CAUSE File not accepted.
ACTION Check the file name or the contents of the file.
---------------------------------------------------------------
3844 MESSAGE ONLY "TRACE ON" MAY BE CHAINED FROM IMF START.
(CIERR 3844)
CAUSE Unexpected reference encountered.
ACTION Check syntax.
---------------------------------------------------------------
3845 MESSAGE EXPECTED CARRIAGE RETURN OR SEMICOLON. (CIERR
3845)
CAUSE Unexpected user input encountered.
ACTION Reenter command.
---------------------------------------------------------------
3846 MESSAGE START COMPLETED. TRACE NOT STARTED DUE TO ERROR.
(CIWARN 3846)
CAUSE Trace error encountered.
ACTION No action required.
---------------------------------------------------------------
3847 MESSAGE THE "ENHANCE" PARAMETER REQUIRES AN "=" SIGN
FOLLOWED BY A DIGIT FROM 0 TO 3. (CIERR 3847)
CAUSE Unacceptable input encountered.
ACTION Check syntax.
---------------------------------------------------------------
3848 MESSAGE THE IMF COMMAND EXPECTS ONLY "ENHANCE" AND
"BLANKS" AS PARAMETERS. (CIERR 3848)
CAUSE Unacceptable input encountered.
ACTION Check syntax.
---------------------------------------------------------------
3850 MESSAGE SPECIFIED DEVICE TYPE MUST BE A DISC. (CIERR
3850)
CAUSE The device specified is not a disk drive.
ACTION Specify a disk drive as a device.
---------------------------------------------------------------
3851 MESSAGE FOREIGN EXPECTS EXACTLY ONE PARAMETER, THE DEVICE
NUMBER (CIERR 3851)
CAUSE The DEVICE parameter is not supported.
ACTION Provide device number.
---------------------------------------------------------------
3852 MESSAGE VOLUME IS ALREADY FOREIGN. (CIWARN 3852)
CAUSE Volume referenced is foreign.
ACTION No need to specify volume as foreign.
---------------------------------------------------------------
3853 MESSAGE NO VOLUME IS MOUNTED ON DRIVE. (CIERR 3853)
CAUSE Volume is not mounted on disk drive.
ACTION Check disk drive.
---------------------------------------------------------------
3854 MESSAGE VOLUME IS AN IN-USE PRIVATE VOLUME. (CIERR 3854)
CAUSE Volume referenced is currently in use.
ACTION Retry command later.
---------------------------------------------------------------
3855 MESSAGE VOLUME IS AN IN-USE SERIAL DISC. (CIERR 3855)
CAUSE Volume referenced is currently a serial disk that
is in use.
ACTION Retry command later.
---------------------------------------------------------------
3856 MESSAGE SPECIFIED DEVICE IS IN THE SYSTEM DOMAIN. (CIERR
3856)
CAUSE Device is part of the system domain.
ACTION Unknown.
---------------------------------------------------------------
3857 MESSAGE DISK TYPE SPECIFIED MAY NOT BE MADE FOREIGN
(CIERR 3857)
CAUSE The disk drive type referenced can not be made
foreign.
ACTION Reenter another disk drive type.
---------------------------------------------------------------
3860 MESSAGE TRACE ALREADY BEING TURNED ON. (CIERR 3860)
CAUSE User has attempted to turn on the trace which is
currently on.
ACTION No need to turn the trace on.
---------------------------------------------------------------
3861 MESSAGE TRACE ALREADY BEING TURNED OFF. (CIERR 3861)
CAUSE The trace referenced has been turned off.
ACTION No need to turn the trace off.
---------------------------------------------------------------
3862 MESSAGE OPEN REQUIRES THREE OR LESS PARAMETERS. (CIERR
3862)
CAUSE Same as the message.
ACTION Check the syntax and reenter the command.
---------------------------------------------------------------
3863 MESSAGE SHUT REQUIRES THREE OR LESS PARAMETERS. (CIERR
3863)
CAUSE Only three or less parameters are required.
ACTION Check syntax.
---------------------------------------------------------------
3864 MESSAGE INVALID TERMINAL LDEV NUMBER. (CIERR 3864)
CAUSE The logical device number referenced is not valid.
ACTION Check syntax.
---------------------------------------------------------------
3865 MESSAGE INVALID GROUP ID. (CIERR 3865)
CAUSE Group identification is not valid.
ACTION Check the syntax and reenter the command with a
valid group id.
---------------------------------------------------------------
3866 MESSAGE LINE ALREADY SHUT. (CIERR 3866)
CAUSE Line referenced is already shut.
ACTION No need to shut line.
---------------------------------------------------------------
3867 MESSAGE LINE MUST BE OPEN BEFORE ACCESSING TRACE. (CIERR
3867)
CAUSE Line referenced is not open.
ACTION Open line before reentering command.
---------------------------------------------------------------
3868 MESSAGE TRACE ALREADY ON. (CIERR 3868)
CAUSE Trace is already turned on.
ACTION No need to turn trace on.
---------------------------------------------------------------
3869 MESSAGE TRACE ALREADY OFF. (CIERR 3869)
CAUSE Trace is already turned off.
ACTION No need to turn trace off.
---------------------------------------------------------------
3870 MESSAGE UNABLE TO OPEN CONFIGURATION FILE IN PUB.SYS.
(CIERR 3870)
CAUSE Configuration file in the PUB group of the SYS
account cannot be open.
ACTION Check the configuration file.
---------------------------------------------------------------
3871 MESSAGE NOT A MULTIPOINT LINE. (CIERR 3871)
CAUSE User is trying to access a nonmultipoint line.
ACTION Check syntax and device.
---------------------------------------------------------------
3872 MESSAGE LINE MUST BE OPEN BEFORE UP. (CIERR 3872)
CAUSE Line referenced must be opened.
ACTION Open the before performing the task.
---------------------------------------------------------------
3873 MESSAGE LINE MUST BE OPEN BEFORE DOWN. (CIERR 3873)
CAUSE Line is not open.
ACTION Open line before performing task.
---------------------------------------------------------------
3874 MESSAGE LINE MUST BE OPEN BEFORE MESSAGES. (CIERR 3874)
CAUSE The line is not open.
ACTION Open line before sending messages.
---------------------------------------------------------------
3875 MESSAGE EXPECTED 'NOW'. (CIERR 3875)
CAUSE Error in syntax.
ACTION Check syntax.
---------------------------------------------------------------
3876 MESSAGE LINE MUST BE OPEN BEFORE FALLBACK. (CIERR 3876)
CAUSE Line must be open before performing task.
ACTION Open line before performing task.
---------------------------------------------------------------
3877 MESSAGE DUPLEX REQUIRES THREE PARAMETERS. (CIERR 3877)
CAUSE Syntax error.
ACTION Check syntax.
---------------------------------------------------------------
3878 MESSAGE UP AND DOWN REQUIRE THREE PARAMETERS. (CIERR
3878)
CAUSE You did not enter three parameters.
ACTION Check the syntax and reenter the command using the
correct number of parameters.
---------------------------------------------------------------
3879 MESSAGE INVALID POLL ENTRY. (CIERR 3879)
CAUSE You entered a syntax error.
ACTION Check the syntax and reenter the command.
---------------------------------------------------------------
3880 MESSAGE MESSAGES REQUIRES THREE PARAMETERS. (CIERR 3880)
CAUSE Syntax error.
ACTION Check syntax.
---------------------------------------------------------------
3881 MESSAGE EXPECTED 'ON' OR 'OFF'. (CIERR 3881)
CAUSE You entered a syntax error.
ACTION Check the syntax and reenter the command.
---------------------------------------------------------------
3882 MESSAGE FALLBACK REQUIRES ONLY TWO PARAMETERS. (CIERR
3882)
CAUSE Systax error encountered.
ACTION Check syntax.
---------------------------------------------------------------
3883 MESSAGE MPLINE COMMAND REQUIRES AT LEAST TWO PARAMETERS.
(CIERR 3883)
CAUSE Syntax error encountered.
ACTION Check syntax.
---------------------------------------------------------------
3884 MESSAGE INVALID MPLINE COMMAND. (CIERR 3884)
CAUSE An unrecognized command has been entered.
ACTION Check file name.
---------------------------------------------------------------
3885 MESSAGE EXPECTED 'HALF' OR 'FULL'. (CIERR 3885)
CAUSE You did not enter the HALF or FULL option.
ACTION Check syntax and reenter the command using an
appropriate option.
---------------------------------------------------------------
3886 MESSAGE LINE MUST BE OPEN BEFORE DUPLEX. (CIERR 3886)
CAUSE Line referenced is not opened.
ACTION Open line before reentering command.
---------------------------------------------------------------
3887 MESSAGE DEBUG REQUIRES THREE OR LESS PARAMETERS. (CIERR
3887)
CAUSE Syntax error encountered.
ACTION Check syntax.
---------------------------------------------------------------
3888 MESSAGE PREVIOUS COMMAND STILL BEING PROCESSED. (CIERR
3888)
CAUSE The previous command is still executing.
ACTION Wait before reentering command.
---------------------------------------------------------------
3889 MESSAGE SYSTEM ERROR (UNABLE TO CREATE MPMON PROCESS).
(CIERR 3889)
CAUSE Problem with system has been encountered.
ACTION Call your service representative.
---------------------------------------------------------------
3890 MESSAGE UNABLE TO GET DATA SEGMENTS. (CIERR 3890)
CAUSE Data segments referenced can not be accessed.
Perhaps you are low on memory, or the amount
required exceeds the system configuration value for
virtual memory.
ACTION Ask the system manager to check the system
configuration and to possibly configure the system
for more virtual memory, or to actually acquire
more memory.
---------------------------------------------------------------
3891 MESSAGE UNABLE TO OPEN MPMON FILE IN PUB.SYS ACCOUNT.
(CIERR 3891)
CAUSE MPMON file can not be opened.
ACTION Check file security.
---------------------------------------------------------------
3892 MESSAGE SYSTEM ERROR (UNABLE TO ADOPT MPMON PROCESS).
(CIERR 3892)
CAUSE System unable to perform requested process.
ACTION Call your service representative.
---------------------------------------------------------------
3893 MESSAGE GROUP.ACCT NOT ALLOWED IN CONFIGURATION FILE
NAME. (CIERR 3993)
CAUSE The group and account are not allowed in the
configuration file name.
ACTION Check the syntax and reenter the command without
the group and account names.
---------------------------------------------------------------
3900 MESSAGE EXPECTED USER AND ACCOUNT NAME OR NO PARAMETERS.
(CIERR 3900)
CAUSE You entered a syntax error.
ACTION Check the syntax and reenter the command with a
user or account name, or nothing at all.
---------------------------------------------------------------
3903 MESSAGE NONE OF THE SPECIFIED USER(S) LOGGED ON. (CIERR
3903)
CAUSE Users referenced are not currently logged on.
ACTION Unable to execute this command.
---------------------------------------------------------------
3907 MESSAGE SM CAPABILITY IS NECESSARY TO SPECIFY "@" HERE.
(CIERR 3907)
CAUSE User does not have the user capability to use this
command.
ACTION Contact your system manager and ask for SM
capability.
---------------------------------------------------------------
3908 MESSAGE AM CAPABILITY IS NECESSARY TO SPECIFY "@" HERE.
(CIERR 3908)
CAUSE User does not have the user capability to execute
this command.
ACTION Contact your system manager and ask for SM
capability.
---------------------------------------------------------------
3909 MESSAGE NAME MUST START WITH ALPHA AND MUST CONTAIN ONLY
ALPHANUMERICS. (CIERR 3909)
CAUSE The file name did not begin with an alpha
character, and/or it contained characters which
were not alphanumeric.
ACTION Reenter file name.
---------------------------------------------------------------