HP 3000 Manuals HP 3000 Manuals
(CIERR) (contd.)
1424 MESSAGE EXPECTED [SESSION NAME,] USER.ACCT [,GROUP]
(CIERR 1424)
CAUSE The session name, user name, account, and group
were omitted.
ACTION Provide a valid session name, user name, account,
and group with this command.
---------------------------------------------------------------
1425 MESSAGE EXPECTED USER PASSWORD. (CIERR 1425)
CAUSE The user password was omitted.
ACTION Provide a valid password with this command.
---------------------------------------------------------------
1426 MESSAGE EXPECTED ACCOUNT NAME. (CIERR 1426)
CAUSE The account name was omitted.
ACTION Provide a valid account name with this command.
---------------------------------------------------------------
1427 MESSAGE EXPECTED ACCOUNT PASSWORD. (CIERR 1427)
CAUSE The account password was omitted.
ACTION Provide a valid account password with this command.
---------------------------------------------------------------
1428 MESSAGE EXPECTED FILE NAME. (CIERR 1428)
CAUSE No file name was specified.
ACTION Provide a valid file name with this command.
---------------------------------------------------------------
1429 MESSAGE EXPECTED GROUP NAME. (CIERR 1429)
CAUSE The group name was omitted.
ACTION Provide a valid group name with this command.
---------------------------------------------------------------
1430 MESSAGE EXPECTED GROUP PASSWORD. (CIERR 1430)
CAUSE The group password was omitted.
ACTION Provide a valid group password with this command.
---------------------------------------------------------------
1431 MESSAGE USER NEEDS IA CAPABILITY FOR SESSIONS. (CIERR
1431)
CAUSE You do not have interactive access (IA) capability.
ACTION Ask your account manager to assign IA capability to
the user.
---------------------------------------------------------------
1432 MESSAGE USER NEEDS BA CAPABILITY FOR JOBS. (CIERR 1432)
CAUSE User does not have batch access (BA) capability.
ACTION Ask your account manager to assign BA capability to
your user name.
---------------------------------------------------------------
1433 MESSAGE PARAMETERS ARE NOT ALLOWED FOR :DATA. (CIERR
1433)
CAUSE Parameters specified are not allowed with the DATA
command.
ACTION The DATA command only allows the job/sessionname,
username/password, accountname/password, and
filename parameters.
---------------------------------------------------------------
1434 MESSAGE FIRST CHARACTER IN NAME NOT ALPHABETIC. (CIERR
1434)
CAUSE The first character in an MPE/iX name must begin
with an alphabetic character.
ACTION Specify name that begins with an alphabetic
character
---------------------------------------------------------------
1435 MESSAGE NAME GREATER THAN 8 CHARACTERS LONG. (CIERR
1435)
CAUSE Name contains more than eight characters.
ACTION Specify a name that contains no more than eight
characters.
---------------------------------------------------------------
1436 MESSAGE ACCT/USER EXIST, GROUP NAME DOESN'T. (CIERR
1436)
CAUSE The group name provided does not exist in the
account.
ACTION Provide a valid group name.
---------------------------------------------------------------
1437 MESSAGE NON-EXISTENT ACCOUNT. (CIERR 1437)
CAUSE The account name provided does not exist on the
system.
ACTION Provide a valid account name.
---------------------------------------------------------------
1438 MESSAGE ACCT EXISTS, USER NAME DOESN'T. (CIERR 1438)
CAUSE The user name provided does not exist within the
specified account.
ACTION Provide a valid user name for this account.
---------------------------------------------------------------
1439 MESSAGE ACCT/USER EXIST, NO HOME GROUP FOR USER. (CIERR
1439)
CAUSE You are not assigned a home group.
ACTION You must specify a valid group name when logging on
if you are not assigned a home group.
---------------------------------------------------------------
1441 MESSAGE INCORRECT PASSWORD. (CIERR 1441)
CAUSE The password provided was incorrect.
ACTION Provide a valid password.
---------------------------------------------------------------
1442 MESSAGE ACCOUNT OUT OF CPU TIME. (CIERR 1442)
CAUSE Account has used all available CPU-time.
ACTION Ask your system manager to increase the amount of
CPU-time allowed this account.
---------------------------------------------------------------
1443 MESSAGE WARNING: ACCOUNT OUT OF CPU TIME. (CIWARN 1443)
CAUSE Account has used all available CPU-time.
ACTION Ask your account manager to increase the amount of
CPU-time allowed this account.
---------------------------------------------------------------
1444 MESSAGE MISSING PASSWORD. (CIERR 1444)
CAUSE The password was not supplied.
ACTION Provide a valid password.
---------------------------------------------------------------
1445 MESSAGE GROUP OUT OF CPU TIME. (CIERR 1445)
CAUSE Group has used all available CPU-time.
ACTION Ask your account manager to increase the amount of
CPU-time allowed this group.
---------------------------------------------------------------
1446 MESSAGE WARNING: GROUP OUT OF CPU TIME. (CIWARN 1446)
CAUSE Group has used all available CPU-time.
ACTION Ask your account manager to increase the amount of
CPU-time allowed this group.
---------------------------------------------------------------
1447 MESSAGE ACCOUNT NEEDS IA CAPABILITY FOR SESSIONS. (CIERR
1447)
CAUSE This account does not have interactive access (IA)
capability.
ACTION Ask your system manager to assign IA capability to
this account.
---------------------------------------------------------------
1448 MESSAGE ACCOUNT NEEDS BA CAPABILITY FOR JOBS. (CIERR
1448)
CAUSE Account is not assigned batch access (BA)
capability.
ACTION Ask your system manager to assign BA capability to
this account.
---------------------------------------------------------------
1449 MESSAGE PASSWORD PROMPTS ARE REQUIRED, EMBEDDED PASSWORDS
ARE NOT ALLOWED. (CIERR 1449)
CAUSE Same as message.
ACTION Remove embedded passwords.
---------------------------------------------------------------
1451 MESSAGE IGNORED DELIMITER. (CIWARN 1451)
CAUSE A specified delimiter was not required and ignored
by the system.
ACTION None.
---------------------------------------------------------------
1452 MESSAGE UNKNOWN KEYWORD. EXPECTED ONE OF TERM, PRI, TIME,
INPRI, HIPRI, OUTCLASS, RESTART. (CIWARN 1452)
CAUSE The specified keyword is not recognized by the JOB
command.
ACTION Use only valid keywords with this command
---------------------------------------------------------------
1453 MESSAGE NO "=" AFTER HIPRI OR RESTART. (CIWARN 1453)
CAUSE Syntax error.
ACTION Check syntax and reenter the command.
---------------------------------------------------------------
1454 MESSAGE EXPECTED "= 'VALUE' " AFTER KEYWORD, IGNORED.
(CIWARN 1454)
CAUSE The equal sign (=) and a value were expected to
follow the keyword but were omitted.
ACTION Enter both the equal sign (=) and a value for the
keyword.
---------------------------------------------------------------
1455 MESSAGE DUPLICATE KEY WORD, PREVIOUS VALUE IGNORED.
(CIWARN 1455)
CAUSE A keyword was specified more than once with this
command duplicated. The last value specified will
be used.
ACTION Enter the keyword only once using the desired
value.
---------------------------------------------------------------
1456 MESSAGE EXPECTED INTEGER VALUE; (1-13 FOR INPRI AND
OUTPRI, AND 1-127 FOR NUMCOPIES). DEFAULT USED
(CIWARN 1456)
CAUSE The values specified for INPRI/OUTPRI and NUMCOPIES
were not within the allowable ranges. The default
values (8 for INPRI/OUTPRI and 1 for NUMCOPIES)
will be used.
ACTION If you want to specify values other than the
default reenter the command.
---------------------------------------------------------------
1457 MESSAGE TERM VALID FOR SESSIONS AND INTERACTIVE JOBS
ONLY, DEFAULT USED. (CIWARN 1457)
CAUSE TERM may only be specified for sessions and
interactive jobs.
ACTION Check with your system supervisor to determine what
default value was specified for TERM during system
configuration.
---------------------------------------------------------------
1458 MESSAGE INVALID TERMINAL TYPE, IGNORED. (CIWARN 1458)
CAUSE The terminal type specified was incorrect and
ignored by the system.
ACTION Check with your system manager to determine what
terminal types are valid to specify.
---------------------------------------------------------------
1459 MESSAGE EXPECTED ONE OF BS, CS, DS, OR ES. DEFAULT USED.
(CIWARN 1459)
CAUSE You did not specify an execution priority queue
with the PRI= keyword. The default value (DS) was
used.
ACTION If you want an execution priority queue other than
DS reenter the command and specify another value.
---------------------------------------------------------------
1460 MESSAGE MUST HAVE 'SM' OR 'OP' CAP. TO SPECIFY HIPRI,
MAXIMUM INPRI OF 13 IS USED. (CIWARN 1460)
CAUSE You do not have system manager (SM) or system
supervisor (OP) capability. The jobfence was set
to 12 or less or the job limit was exceeded and you
were denied access to the system.
ACTION Ask your system supervisor to lower the jobfence.
---------------------------------------------------------------
1461 MESSAGE HIPRI PREVIOUSLY SPECIFIED, INPRI VALUE USED.
(CIWARN 1461)
CAUSE Same as message.
ACTION None; the message is for information only.
---------------------------------------------------------------
1462 MESSAGE LOWEST INPRI VALUE IS 1, 1 USED. (CIWARN 1462)
CAUSE Value specified for INPRI was less than 1.
ACTION If you want an INPRI value greater than 1 specify
the new value.
---------------------------------------------------------------
1463 MESSAGE HIGHEST INPRI VALUE IS 13, 13 USED. (CIWARN 1463)
CAUSE The value specified for INPRI exceeded 13.
ACTION If you want an INPRI value less than 13 specify the
new value.
---------------------------------------------------------------
1464 MESSAGE INPRI PREVIOUSLY SPECIFIED, HIPRI VALUE USED.
(CIWARN 1464)
CAUSE Same as message.
ACTION None; the message is for information only.
---------------------------------------------------------------
1465 MESSAGE OUTCLASS VALID FOR JOBS ONLY, IGNORED. (CIWARN
1465)
CAUSE Same as message.
ACTION None; the message is for information only.
---------------------------------------------------------------
1466 MESSAGE INV. OUTCLASS-EXPECT CLASS NAME OR LDEV; DEFAULT
USED. (CIWARN 1466)
CAUSE Same as message.
ACTION None; the message is for information only.
---------------------------------------------------------------
1467 MESSAGE MUST HAVE ND CAP. TO SPECIFY OUTCLASS. (CIWARN
1467)
CAUSE Same as message.
ACTION Ask the system manager to assign the ND capability
to your user.
---------------------------------------------------------------
1468 MESSAGE LOWEST OUTPRI IS 1, 1 USED. (CIWARN 1468)
CAUSE A value of less than 1 was specified for OUTPRI and
the system will default to the value of 1.
ACTION If you want an OUTPRI value greater than 1 specify
the new value.
---------------------------------------------------------------
1469 MESSAGE HIGHEST OUTPRI IS 13, 13 USED. (CIWARN 1469)
CAUSE A value of more than 13 was specified for OUTPRI
and the system will default to the value of 13.
ACTION If you want an OUTPRI value less than 13 specify
the new value.
---------------------------------------------------------------
1470 MESSAGE EXPECTED INT. BETWEEN 1 AND 127 FOR NUMCOPIES.
(CIWARN 1470)
CAUSE The value specified for NUMCOPIES was not with the
allowable range of 1 to 127.
ACTION Specify a value of between 1 and 127 for NUMCOPIES.
---------------------------------------------------------------
1471 MESSAGE 127 IS MAX. NUMBER OF COPIES, 127 USED. (CIWARN
1471)
CAUSE The value specified for number of copies was more
than 127 and the system defaults to 127.
ACTION If you want more than 127 copies you will have to
enter more than once.
---------------------------------------------------------------
1472 MESSAGE OUTCLASS ONLY HAS 3 PARAMETERS:
[DEVICE][,OUTPRI][,NUMCOPIES]. EXTRA PARAMETER
IGNORED. (CIWARN 1472)
CAUSE The parameter specified was not valid with the
OUTCLASS keyword.
ACTION Use only the DEVICE, OUTPRI, or NUMCOPIES
parameters with the OUTCLASS keyword.
---------------------------------------------------------------
1473 MESSAGE RESTART FOR JOBS ONLY, IGNORED. (CIWARN 1473)
CAUSE Same as message.
ACTION None; the message is for information only.
---------------------------------------------------------------
1475 MESSAGE GROUP PASSWORD SPECIFIED BUT NOT REQUIRED;
IGNORED. (CIWARN 1475)
CAUSE The group password specified was not required and
was ignored by the system.
ACTION None.
---------------------------------------------------------------
1476 MESSAGE ACCOUNT PASSWORD SPECIFIED BUT NOT REQUIRED;
IGNORED. (CIWARN 1476)
CAUSE The account password specified was not required and
was ignored by the system.
ACTION None.
---------------------------------------------------------------
1477 MESSAGE USER PASSWORD SPECIFIED BUT NOT REQUIRED;
IGNORED. (CIWARN 1477)
CAUSE The user password specified was not required and
was ignored by the system.
ACTION None.
---------------------------------------------------------------
1478 MESSAGE INVALID OUTCLASS DEVICE TYPE, DEFAULT USED.
(CIWARN 1478)
CAUSE The device type specified was not a valid LDEV
number of device class name and the default will be
used.
ACTION Check with your system manager to determine what
default was assigned to outclass device type during
system configuration.
---------------------------------------------------------------
1479 MESSAGE EXPECT INTEGER BETWEEN 1 AND 32767, "?", OR
"UNLIM",DEFAULT OF UNLIMITED TIME IS USED. (CIWARN
1479)
CAUSE The TIME parameter of the HELLO command was not
given a value and the default of unlimited time
will be used.
ACTION If you want to limit the amount of time allowed for
logging on specify a valid value.
---------------------------------------------------------------
1480 MESSAGE MINIMUM NUMBER OF COPIES IS 1, 1 USED. (CIWARN
1480)
CAUSE The number of copies specified was less than 1 and
1 copy will be printed.
ACTION If you want more than one copy specify the new
value.
---------------------------------------------------------------
1481 MESSAGE EXPECTED INTEGER VALUE BETWEEN 1-14. DEFAULT
USED. (CIWARN 1481)
CAUSE The value specified was not within the allowable
range of from 1 to 14, and the default was used.
ACTION To specify a value other than the default specify a
value from between 1 and 14.
---------------------------------------------------------------
1482 MESSAGE NUMBER OF COPIES MUST BE INTEGER BETWEEN 1-127.
(CIWARN 1482)
CAUSE The value specified was not within the allowable
range of from between 1 and 127.
ACTION Enter a valid value in the range between 1 and 127.
---------------------------------------------------------------