HP 3000 Manuals HP 3000 Manuals
Lesson 2 Examining a Job File
Q 3-14
-------------------------------------------------------------------------------------------
| |
| JOB Command Parameter Required Optional |
| |
-------------------------------------------------------------------------------------------
| |
| User Name X |
| |
| Account Name X |
| |
| Group Name X |
| |
| Job Name X |
| |
| Time X |
| |
| INPRI X |
| |
| RESTART X |
| |
| OUTCLASS X |
| |
| SPSAVE X |
| |
-------------------------------------------------------------------------------------------
Q 3-15 MYJOB1 is the job name; ACCTx is the account name;
USERx is the user name; CLASS is the group name.
Q 3-16 No. The group password should be inserted in the
!JOB command in order for MYJOB1 to run.
!JOB MYJOB1,USERx/UPASSX...CLASS/LASER..
Q 3-17 If the system crashes and you do not have the
RESTART parameter in your !JOB command, your job
will not continue processing when the system is
restarted, even if the operator uses the RECOVERY
option.
Q 3-18 (c) The outclass priority must be set above the
outfence.
Q 3-19 The job listing from MYJOB1 is scheduled to be
printed on the line printer (LP). The outclass
priority is 1 (which means the job listing will not
print).
Q 3-20 MYJOB1 IS DONE!! prints on USERx's screen when
MYJOB1 completes processing.
Q 3-21 This line accesses the editor.
Q 3-22 This line texts in MYFILE1 so that it can be listed
with the L ALL, OFFLINE command.
Q 3-23 The print priority of the output is 1. The line
printer (LP) is scheduled to print the output;
however, the output does not print until the
priority, currently 1, has a value above the
outfence.
Exercise 3-2: Lesson 2 Review
1. !JOB MYJOB2,
USERx/UPASSX.ACCTx/APASSX
2. SHOWJOB STATUS (to verify jobfence)
!JOB MYJOB2...;INPRI=10 (or 1 greater than the jobfence);...
3. !JOB MYJOB2,....ACCTx/APASSX,CLASS
;INPRI=10;RESTART;....
4. !JOB MYJOB2.....;OUTCLASS=LP,1
5. The line following !EDITOR should read T MYFILE2.CLASS
6. Add a line after EXIT: !TELL USERx.ACCTx MYJOB2 IS COMPLETE!!
The modified MYJOB2 file should now look like the following:
________________________________________________________
| |
| |
| !JOB MYJOB2,USERx/UPASSX.ACCTx/APASSX,CLASS;& |
| !INPRI=10;RESTART;OUTCLASS=LP,1 |
| !COMMENT MYJOB2 PRINTS MYFILE2 |
| !CONTINUE |
| !EDITOR |
| T MYFILE2.CLASS |
| L ALL, OFFLINE |
| EXIT |
| !TELL USERx.ACCTx MYJOB2 IS COMPLETE!! |
| !EOJ |
| |
________________________________________________________
*********** End of Exercise 3-2 **********