Ap E. Default RTS Parameters [ Installing and Configuring HP X.400 Administrator's Guide ] MPE/iX 5.0 Documentation
Installing and Configuring HP X.400 Administrator's Guide
Appendix E Default RTS Parameters
The following table lists the parameter defaults for the RTS.
Table E-1. Default RTS Parameters
---------------------------------------------------------------------------------------------
| | |
| Dialogue Mode | One-way Monologue (0)* |
| Window Size | 1* |
| Checkpoint Size | 5 KB |
| SSDU Size | 5* |
| High Transfer Time Limit | 8 hours |
| | |
---------------------------------------------------------------------------------------------
| | |
| Normal Transfer Time Limit | 16 hours |
| Low Transfer Time Limit | 24 hours |
| RTS Recovery | Off |
| Profile Supported | NIST84 |
| Use unstructured SCID | Off |
| | |
---------------------------------------------------------------------------------------------
| | |
| Send 8883 as P1 Protocol id | No |
| Max Connection Retries | Unlimited |
| High Frequency to Transfer | 1 minute |
| Normal Frequency to Transfer | 1 minute |
| Low Frequency to Transfer | 10 minutes |
| | |
---------------------------------------------------------------------------------------------
* Not configurable.
MPE/iX 5.0 Documentation