HP 3000 Manuals HP 3000 Manuals
GETUDC Program Error Messages
GETUDC sets the user-defined Job Control Word (JCW) GUERR to a value that
indicates the error or warning that occurred. If no error or warning
occurred, GUERR is set to zero.
When running interactively, some errors do not cause GETUDC to terminate.
When running in batch mode, if any error is encountered, GETUDC
terminates with an appropriate error message.
The following list of error and warning messages are issued by GETUDC.
Error messages are in the range 0 to 1999. Warning messages are in the
range 2000 to 2999.
0000 to MESSAGE The GUERR value is equivalent to a file system error number. The
1000 returned message is a file system error message.
CAUSE A file system error has occurred.
ACTION Look up the indicated file system error in the MPE V/E Intrinsics
Reference Manual (32033#90007) and take appropriate action.
--------------------------------------------------------------------------------------
1001 MESSAGE CATOPEN INTRINSIC ERROR:error number
FILE: GUCATnnn.PUB.SYS
UNABLE to OPEN THE MESSAGE CATALOG FILE (GUERR 1001)
CAUSE GETUDC is unable to open the NLS language catalog file.
ACTION The user should look up the indicated CATOPEN intrinsic error in
the MPE V/E Native Language Support Reference Manual
(32414-90001) and troubleshoot accordingly.
--------------------------------------------------------------------------------------
1002 MESSAGE CATREAD INTRINSIC ERROR: error numberFILE:
GUCATnnn.PUB.SYS
UNABLE TO DISPLAY CATALOG MESSAGE SET = n
MSG =m (GUERR 1002)
CAUSE GETUDC is unable to display the message desired, because a read
error occurred on the catalog file.
ACTION The user should look up the indicated CATREAD intrinsic error in
the MPE V/E Native Language Support Reference Manual
(32414-90001) and troubleshoot accordingly.
--------------------------------------------------------------------------------------
1003 MESSAGE SM CAPABILITY REQUIRED TO RUN THIS UTILITY. (GUERR 1003)
CAUSE The user does not have System Manager (SM) capability.
ACTION The user should have SM capability to run this utility.
--------------------------------------------------------------------------------------
1004 MESSAGE file system error message (FSERR nnn)
UNABLE TO OPEN $STDINX. (GUERR 1004)
CAUSE The cause is determined by the file system error returned.
ACTION Look up the indicated file system error, refer to the MPE V/E
Intrinsics Reference Manual (32033#90007), and troubleshoot
accordingly.
--------------------------------------------------------------------------------------
1005 MESSAGE file system error message (FSERR nnn) FILE: COMMAND.PUB.SYS
UNABLE TO OPEN THE FILE COMMAND.PUB.SYS. (GUERR 1005)
CAUSE GETUDC needs the file COMMAND.PUB.SYS in order to gather all UDC
files from the system. It is unable to open the file, because
the file is not present or because of other file system errors.
ACTION Look up the indicated file system error and take appropriate
action.
--------------------------------------------------------------------------------------
1006 MESSAGE ATTEMPT TO WRITE BEYOND END OF FILE. (GUERR 1006)
CAUSE The file created by GETUDC is not large enough to hold all UDC
file names.
ACTION Use a file equation to override the default file size (1023
records).
--------------------------------------------------------------------------------------
1007 MESSAGE file system error message (FSERRnnn) FILE: filename
FATAL ERROR RETURNED FROM FWRITE INTRINSIC. (GUERR 1007)
CAUSE A fatal error is returned from FWRITE intrinsic call.
ACTION Look up file name and the file system error, refer to the MPE V/E
Intrinsics Reference Manual (32033-90007), and take appropriate
action.
--------------------------------------------------------------------------------------
1008 MESSAGE file system error message (FSERR nnn) FILE: filename
FATAL ERROR RETURNED FROM FREAD INTRINSIC. (GUERR 1008)
CAUSE A fatal error is returned from FREAD intrinsic call.
ACTION Look up file name and the file system error, refer to the MPE V/E
Intrinsics Reference Manual (32033-90007), and take appropriate
action.
--------------------------------------------------------------------------------------
1009 MESSAGE file system error message (FSERRnnn) FILE: filename
FATAL ERROR RETURNED FROM FCLOSE INTRINSIC. (GUERR 1009)
CAUSE A fatal error is returned from FCLOSE intrinsic call.
ACTION Look up file name and the file system error, refer to the MPE V/E
Intrinsics Reference Manual (32033-90007), and take appropriate
action.
--------------------------------------------------------------------------------------
1010 MESSAGE file system error message (FSERR nnn) FILE:
DUPCOMMD.group.account
UNABLE TO OPEN TEMPORARY COPY OF COMMAND.PUB.SYS. (GUERR 1010)
CAUSE GETUDC copies the file COMMAND.PUB.SYS to a temporary file and
scans this temporary file instead. It is unable to open this
file.
ACTION Look up the file system error, refer to the MPE V/E Intrinsics
Reference Manual (32033-90007), and take appropriate action.
--------------------------------------------------------------------------------------
1011 MESSAGE file system error message (FSERR nnn) FILE:
DUPCOMMD.group.account
UNABLE TO CLOSE DUPLICATE COPY OF COMMAND.PUB.SYS. (GUERR 1011)
CAUSE GETUDC copies the file COMMAND.PUB.SYS to a temporary file and
scans this temporary file instead. It is unable to close this
file.
ACTION Look up the file system error, refer to the MPE V/E Intrinsics
Reference Manual (32033-90007), and take appropriate action.
--------------------------------------------------------------------------------------
1012 MESSAGE file system error message (FSERR nnn) FILE: filename
FATAL ERROR RETURNED FROM FOPEN INTRINSIC. (GUERR 1012)
CAUSE The cause is determined by the file system error returned.
ACTION Look up the file name and file system error returned, refer to
the MPE V/E Intrinsics Reference Manual (32033-90007), and take
appropriate action.
--------------------------------------------------------------------------------------
1013 MESSAGE file system error message (FSERR nnn) FILE: filename
FATAL ERROR RETURNED FROM FREADDIR INTRINSIC. (GUERR 1013)
CAUSE GETUDC scans the temporary copy of the file COMMAND.PUB.SYS by
means of the FREADDIR intrinsic. A fatal error is returned from
the intrinsic call.
ACTION Look up the file name and file system error returned, refer to
the MPE V/E Intrinsics Reference Manual (32033-90007), and take
appropriate action.
1014 MESSAGE INCORRECT FILE FORMAT FOR COMMAND.PUB.SYS. (GUERR 1014)
CAUSE The file COMMAND.PUB.SYS is in an incorrect file format (record
size is less than 20 words and/or the file is an ASCII file).
ACTION Purge the file COMMAND.PUB.SYS, rebuild the file in correct
format, and perform :SETCATALOG commands appropriately to
recreate the UDC environment in the system.
--------------------------------------------------------------------------------------
1015 MESSAGE COMMAND.PUB.SYS IS CORRUPTED. (GUERR 1015)
CAUSE The file COMMAND.PUB.SYS is corrupted. (Maximum number of
entries in the file is greater than number of records (EOF) of
the file.)
ACTION Purge the file COMMAND.PUB.SYS, rebuild the file in correct
format, and perform :SETCATALOG commands appropriately to
recreate the UDC environment in the system.
--------------------------------------------------------------------------------------
2001 MESSAGE CATCLOSE INTRINSIC ERROR: error number FILE: GUCATnnn.PUB.SYS
UNABLE TO CLOSE THE MESSAGE CATALOG FILE. (GUWARN 2001)
CAUSE The cause is determined by the error number returned.
ACTION No action required.
--------------------------------------------------------------------------------------
2002 MESSAGE file system error message (FSERR nnn) FILE: COMMAND.PUB.SYS
UNABLE TO CLOSE THE FILE COMMAND.PUB.SYS.(GUWARN 2002)
CAUSE The cause is determined by the file system error.
ACTION No action required.
--------------------------------------------------------------------------------------
2003 MESSAGE file system error message (FSERR nnn) FILE: filename
UNABLE TO CLOSE $STDINX. (GUWARN 2003)
CAUSE The cause is determined by the file system error.
ACTION No action required.
--------------------------------------------------------------------------------------
2004 MESSAGE COMMAND.PUB.SYS IS EMPTY. (GUWARN 2004)
CAUSE The file COMMAND.PUB.SYS is empty.
ACTION No action required.
--------------------------------------------------------------------------------------
2005 MESSAGE ERROR RETURNED FROM FCHECK INTRINSIC. (GUWARN 2005)
CAUSE Unknown.
ACTION No action required.
--------------------------------------------------------------------------------------
2006 MESSAGE file system error message (FSERR nnn) FILE:
DUPCOMMD.group.account
UNABLE TO CLOSE TEMPORARY COPY OF COMMAND.PUB.SYS. (GUWARN 2006)
CAUSE GETUDC is unable to close the temporary copy of COMMAND.PUB.SYS
after the scan is completed.
ACTION No action required.
--------------------------------------------------------------------------------------