HP 3000 Manuals HP 3000 Manuals
SHOWSET
The VOLUTIL SHOWSET command is used to display information about a
particular volume set. The master volume of the volume set must be
mounted in the MASTER state as displayed by the DSTAT command.
Task
Displays volume set information.
Syntax
[ {CLASSES }]
[ {VOLUMES }]
[ {SETINFO }]
SHOWSET [SNAME=]sname [[INFO=] {DSTATUS }]
[ {STORAGE [;FREE][;PERM][;TRANS]}]
[ {LABELS [;MPEIX] }]
[ {MIRROR }]
[ {STRUCT }]
Parameter
sname The name assigned to the mirrored volume set.
Required.
MIRROR Include mirrored volume set information in the
display. Optional.
None of the other SHOWSET options are affected by mirrored disks. For a
detailed account of the other options, refer to the Volume Management
Reference Manual (32650-90045).
Example
This example shows how to use the VOLUTIL SHOWSET command.
______________________________________________________________
| |
| |
| volutil:SHOWSET ADMIN_SET MIRROR |
| |
| Volume Name Vol Status Mirr Status Ldev Mirr ldev |
| - - - - - - - - - - - - - - - - - - - - - - - - - - |
| MEMBER1 MASTER USER 30 * |
| MEMBER1 MASTER BACKUP 31 * |
| |
______________________________________________________________
Since the volume set is split, the "Mirr Ldev" field is not valid and
displays "*"s. The previous partner volume may or may not be mounted on
the system. If the volume set names and volume names match, the LDEVs
can be assumed to have been mirrored partners.
______________________________________________________________
| |
| |
| volutil:SHOWSET PROD_SET MIRROR |
| |
| Volume Name Vol Status Mirr Status Ldev Mirr ldev |
| - - - - - - - - - - - - - - - - - - - - - - - - - - |
| MEMBER1 MASTER NORMAL 30 31 |
| MEMBER1 MASTER NORMAL 31 30 |
| MEMBER2 MEMBER DISABLED 32 33 |
| MEMBER2 MEMBER NON-MIRROR 33 32 |
| MEMBER3 MEMBER REPAIR-DEST 34 35 |
| MEMBER3 MEMBER REPAIR-SRCE 35 34 |
| MEMBER4 MEMBER STAGED-DEST 36 37 |
| MEMBER4 MEMBER STAGED-SRCE 37 36 |
| MEMBER5 MEMBER PENDING 38 * |
| MEMBER6 MEMBER SUSPEND_MIRR 39 * |
| |
______________________________________________________________
Table 5-2. SHOWSET Mirrored Disk States
--------------------------------------------------------------
| | | |
| States | Description | Volume |
| | | Available? |
| | | |
--------------------------------------------------------------
| | | |
| NORMAL | Disks being mirrored. | Yes |
| | | |
--------------------------------------------------------------
| | | |
| PENDING | Partner did not mount | No |
| | upon system startup or | |
| | VSOPEN. | |
| | | |
--------------------------------------------------------------
| | | |
| DISABLED | Disk failure after | No, but |
| | volume mounted. | partner is. |
| | | |
--------------------------------------------------------------
| | | |
| NON-MIRROR | Disk does not have | Yes |
| | mirrored partner. | |
| | Partner went disabled | |
| | after mounting. | |
| | | |
--------------------------------------------------------------
| | | |
| SUSPEND-MIRROR | Disk does not have | Yes |
| | mirrored partner because | |
| | partner did not mount | |
| | and operator issued a | |
| | SUSPENDMIRRVOL command. | |
| | | |
--------------------------------------------------------------
| | | |
| REPAIR-DEST | Disk being repaired | Yes |
| | (copied to). | |
| | | |
--------------------------------------------------------------
| | | |
| REPAIR-SRCE | Disk initiating repair | Yes |
| | (copied from). | |
| | | |
--------------------------------------------------------------
| | | |
| STAGED-DEST | Disk awaiting repair as | No, but |
| | a REPAIR-DEST. | partner is. |
| | | |
--------------------------------------------------------------
| | | |
| STAGED-SRCE | Disk awaiting repair as | Yes |
| | a REPAIR-SRCE. | |
| | | |
--------------------------------------------------------------