HP 3000 Manuals HP 3000 Manuals
Appendix A SIGEDITOR Error Messages
Introduction
This appendix lists and explains the SIGEDITOR error messages.
-----------------------------------------------------------------------------
MESSAGE UNABLE TO OPEN TERMINAL. (SIGERR 001)
CAUSE There is a system problem with the terminal.
ACTION Contact your system manager if you are unable to resolve this
problem.
-----------------------------------------------------------------------------
MESSAGE UNABLE TO OPEN LIBRARY FORM FILE. (SIGERR 002)
CAUSE MPE could not find the specified form file.
ACTION Verify the form filename.
-----------------------------------------------------------------------------
MESSAGE FILE IS NOT A VALID FORM FILE OR IS CORRUPT. (SIGERR 003)
CAUSE An invalid form file was selected to be opened.
ACTION Verify the form filename.
-----------------------------------------------------------------------------
MESSAGE FILE SPECIFIED IS NOT A VALID FORMS FILE. (SIGERR 004)
CAUSE An invalid form file (or an old forms file) was selected to be
opened.
ACTION Verify the form filename. Verify that the form was created
with version 7.0 or higher of SIGEDITOR.
-----------------------------------------------------------------------------
MESSAGE UNABLE TO OPEN TEMPORARY WORK FILE. (SIGERR 005)
CAUSE There is either an existing temporary file or the system is out
of memory.
ACTION Purge the temporary file if it exists.
-----------------------------------------------------------------------------
MESSAGE UNEXPECTED FILE ERROR ON FORMS FILE. (SIGERR 007)
CAUSE There is a possible system problem.
ACTION Contact your system manager if you are unable to resolve this
problem.
-----------------------------------------------------------------------------
MESSAGE FORM DOES NOT EXIST. (SIGERR 011)
CAUSE The form file does not contain the specified form.
ACTION Verify that spelling of form name is correct, including the
usage of upper and lower case.
-----------------------------------------------------------------------------
MESSAGE FORM SPECIFIED ALREADY EXISTS. (SIGERR 013)
CAUSE The name specified for this form is the name of an existing
form in the same forms file.
ACTION Choose a unique form name.
-----------------------------------------------------------------------------
MESSAGE PLEASE ENTER A VALID FORM NAME. (SIGERR 015)
CAUSE The specified form name is not valid.
ACTION Use only alphanumeric characters when naming a form.
-----------------------------------------------------------------------------
MESSAGE THIS FORM CONTAINS NO FIELDS FOR EDITING ATTRIBUTES. (SIGERR
016)
CAUSE You can only edit field attributes when fields exist within a
form.
ACTION Check the form for fields.
-----------------------------------------------------------------------------
MESSAGE FILE SPECIFIED ALREADY EXISTS. (SIGERR 019)
CAUSE The specified file currently exists as a permanent file.
ACTION Enter another filename.
-----------------------------------------------------------------------------
MESSAGE UNABLE TO OPEN OUTPUT FILE SPECIFIED. (SIGERR 020)
CAUSE SIGEDITOR could not find the specified output file.
ACTION Verify that the filename is correct.
-----------------------------------------------------------------------------
MESSAGE UNEXPECTED FILE SYSTEM ERROR ON OUTPUT FILE. (SIGERR 022)
CAUSE There is a possible system problem.
ACTION Contact your system manager if you are unable to resolve this
problem.
-----------------------------------------------------------------------------
MESSAGE UNABLE TO OPEN S AND D SPECIFICATIONS FILE. (SIGERR 025)
CAUSE SIGEDITOR could not find the specified file.
ACTION Verify that the filename is correct.
-----------------------------------------------------------------------------
MESSAGE FORM FILE SPECIFIED ALREADY EXISTS. (SIGERR 026)
CAUSE The specified file currently exists as a permanent file.
ACTION Select a unique form filename.
-----------------------------------------------------------------------------
MESSAGE UNABLE TO PURGE OLD FORMS FILE. (SIGERR 029)
CAUSE There is a system problem, or the file is open from another
source.
ACTION Contact your system manager if you are unable to resolve this
problem.
-----------------------------------------------------------------------------
MESSAGE UNEXPECTED FILE SYSTEM ERROR ON S AND D SPEC FILE. (SIGERR 030)
CAUSE There is a possible system problem.
ACTION Contact your system manager if you are unable to resolve this
problem.
-----------------------------------------------------------------------------
MESSAGE RPG VERSION 6.XX FORMS FILE. RECONVERT S&D SPECS (SIGERR 031)
CAUSE SIGEDITOR tried to access a forms file created with RPG version
6.XX.
ACTION Reconvert the S&D specifications using the current version of
SIGEDITOR.
-----------------------------------------------------------------------------
MESSAGE FILE SPECIFIED IS NOT AN OLD FORMS FILE. (SIGERR 032)
CAUSE An invalid form file (or an old forms file) was selected.
ACTION Verify the form filename. Verify that the form was created
with version 7.0 or higher of SIGEDITOR.
-----------------------------------------------------------------------------
MESSAGE UNABLE TO OPEN MESSAGE CATALOG FILE. (SIGERR 035)
CAUSE MPE could not find the specified catalog.
ACTION Contact your system manager if you are unable to resolve this
problem.
-----------------------------------------------------------------------------
MESSAGE UNKNOWN COMMAND ARGUMENT PASSED TO PROGRAM. (SIGERR 038)
CAUSE An invalid parameter was passed to SIGEDITOR.
ACTION Refer to the descriptions of parameters accepted by SIGEDITOR
(in this manual).
-----------------------------------------------------------------------------
MESSAGE UNEXPECTED FILE SYSTEM ERROR HAS OCCURRED. (SIGERR 039)
CAUSE There is a possible system problem.
ACTION Contact your system manager if you are unable to resolve this
problem.
-----------------------------------------------------------------------------
MESSAGE INVALID PROCESSING OPTION SPECIFIED. (SIGERR 040)
CAUSE A value other than "A" or "P" was input.
ACTION Type "A" to process all form files or "P" for a prompt before
processing each forms file.
-----------------------------------------------------------------------------
MESSAGE A (Y)ES OR (N)O RESPONSE IS REQUIRED. (SIGERR 041)
CAUSE A value other than "Y" or "N" was input while using the forms
conversion program.
ACTION Type "Y" to review conversion results, or "N" to omit the
review step.
-----------------------------------------------------------------------------
MESSAGE INVALID FILE SETS SPECIFIED. SEE MANUAL. (SIGERR 043)
CAUSE An invalid file set was specified.
ACTION See the rules for valid file sets when converting S and D
specifications (chapter 2).
-----------------------------------------------------------------------------
MESSAGE FILE SYSTEM ERROR ON OUTPUT FILE. (SIGERR 047)
CAUSE There is a possible system problem.
ACTION Contact your system manager if you are unable to resolve this
problem.
-----------------------------------------------------------------------------
MESSAGE UNEXPECTED FILE SYSTEM ERROR ON CONSOLE WORK FILE. (SIGERR 049)
CAUSE There is a possible system problem.
ACTION Contact your system manager if you are unable to resolve this
problem.
-----------------------------------------------------------------------------
MESSAGE FIELDS AND CONSTANTS HAVE EXCEEDED CAPACITY. (SIGERR 050)
CAUSE There are more than 256 fields and constants on this form.
ACTION Reduce the number of fields and constants to less than 256.
-----------------------------------------------------------------------------
MESSAGE EXTRA DATA SEGMENT GET/FREE FAILURE. (SIGERR 057)
CAUSE A system error has occurred.
ACTION Contact your system manager for assistance.
-----------------------------------------------------------------------------
MESSAGE EXTRA DATA SEGMENT READ/WRITE FAILURE (SIGERR 058)
CAUSE A system error has occurred.
ACTION Contact your system manager for assistance.
-----------------------------------------------------------------------------
MESSAGE MAXIMUM NUMBER OF 10 FORMS EXCEEDED. (SIGERR 059)
CAUSE There are too many record definitions for the console file.
ACTION Reduce the number of record types in the RPG input
specifications for this file.
-----------------------------------------------------------------------------
MESSAGE TOTAL NUMBER OF FIELDS WILL NOT FIT ON FORM. (SIGERR 060)
CAUSE There are too many fields defined for a console form.
ACTION Reduce the number of fields defined in the RPG input
specifications for this form.
-----------------------------------------------------------------------------
MESSAGE NON-NUMERIC ID WAS ENTERED. (SIGERR 061)
CAUSE A special or alphabetic character was entered for either the
"LIST ENTRY ID" or "NEW LIST ENTRY ID" field on the help area
update/delete form.
ACTION Reenter the ID using only the digits 0-9. Leading or trailing
blanks are also allowed.
-----------------------------------------------------------------------------
MESSAGE ID ENTERED WAS NOT FOUND. (SIGERR 062)
CAUSE The "LIST ENTRY ID" entered on the help area update/delete form
does not exist.
ACTION Recheck the ID to make sure that it exists and was entered
correctly.
-----------------------------------------------------------------------------
MESSAGE NEW ID ENTERED ALREADY EXISTS. (SIGERR 063)
CAUSE The "NEW LIST ENTRY ID" entered on the help area update/delete
form for a change ID operation already exists.
ACTION Reenter the ID, making sure that it has not already been used.
-----------------------------------------------------------------------------
MESSAGE ZERO (0) IS NOT A VALID ID. (SIGERR 064)
CAUSE Either the "LIST ENTRY ID" of the "NEW LIST ENTRY ID" field was
left blank or contains all zeros on the help area update/delete
form.
ACTION Reenter the ID using a valid number.
-----------------------------------------------------------------------------
MESSAGE ID ENTERED IS NOT ON THE SCREEN. (SIGERR 065)
CAUSE The "LIST ENTRY ID" entered on the help area update/delete form
for a change attributes operation is not on the screen.
ACTION Reenter the ID using a number that appears on the screen, or
use the scrolling functions to display the entry you want to
change.
-----------------------------------------------------------------------------
MESSAGE HELP FORM NAME IS INVALID. (SIGERR 066)
CAUSE The help form name entered is not in the required format.
ACTION Reenter the name, making sure that it is 8 characters long and
that the last 2 characters are numeric digits from 0 through 9.
-----------------------------------------------------------------------------
MESSAGE SUPPRESS SELECTION IND. MUST BE BLANK OR 01 TO 99. (SIGERR 067)
CAUSE The suppress selection indicator is not a legal value.
ACTION Reenter the indicator, making sure it is blank or an indicator
in the range 01 to 99.
-----------------------------------------------------------------------------
MESSAGE NON-NUMERIC HELP DOC. STARTING LINE NUMBER ENTERED. (SIGERR
068)
CAUSE A numeric value between one and 24 must be used here.
ACTION Reenter the appropriate data.
-----------------------------------------------------------------------------
MESSAGE UPPER LEFT ROW MUST BE ZERO OR 01 TO 24. (SIGERR 069)
CAUSE The upper left row number is not in the required range.
ACTION Reenter the row number, making sure that it is in the range 00
to 24.
-----------------------------------------------------------------------------
MESSAGE UPPER LEFT COLUMN MUST BE ZERO OR 01 TO 80. (SIGERR 070).
CAUSE The upper left column number is not in the required range.
ACTION Reenter the column number making sure that it is in the range
00 to 80.
-----------------------------------------------------------------------------
MESSAGE LOWER RIGHT ROW MUST BE ZERO OR 01 TO 24. (SIGERR 071)
CAUSE The lower right row number is not in the required range.
ACTION Reenter the row number, making sure that it is in the range 00
to 24.
-----------------------------------------------------------------------------
MESSAGE LOWER RIGHT COLUMN MUST BE ZERO OR 01 TO 80. (SIGERR 072)
CAUSE The lower right column number is not in the required range.
ACTION Reenter the column number, making sure that it is in the range
01 to 80.
-----------------------------------------------------------------------------
MESSAGE INVALID NULL HELP AREA DEFINITION. (SIGERR 073)
CAUSE One or more row or column numbers in the help area definitions
are not zero for a null help area definition.
ACTION Reenter the row and column numbers as zeros to define a null
help area or as nonzero values in the proper ranges to define a
normal help area.
-----------------------------------------------------------------------------
MESSAGE UPPER LEFT IS NOT ABOVE AND TO THE LEFT OF LOWER RIGHT. (SIGERR
074)
CAUSE The upper left row and column numbers used to define the help
area must be less than or equal to the lower right row and
column numbers, and they are not.
ACTION Reenter the row and column numbers, making sure that they are
correct in relation to each other.
-----------------------------------------------------------------------------
MESSAGE UPPER LEFT MUST BE DEFINED FIRST. (SIGERR 075)
CAUSE An attempt was made to select the lower right corner of the
help area before the upper left corner was selected.
ACTION Select the upper left corner first, then the lower right
corner.
-----------------------------------------------------------------------------
MESSAGE UPPER LEFT AND/OR LOWER RIGHT CORNER NOT DEFINED. (SIGERR 076)
CAUSE An attempt was made to set the attributes for a help area
before both corners were selected.
ACTION First select the upper left corner of the help area, then
select the lower right corner of the help area, then select the
help area attributes.
-----------------------------------------------------------------------------
MESSAGE MAXIMUM NUMBER OF HELP AREAS (256) ALREADY EXIST. (SIGERR 077)
CAUSE The maximum number of help areas have already been defined for
this form.
ACTION You must delete some help areas before any more can be defined
for this form. Perhaps several help areas can be combined into
one larger help area.
-----------------------------------------------------------------------------
MESSAGE UPPER LEFT ROW CANNOT BE LESS THAN START LINE. (SIGERR 078)
CAUSE A help area must start at or below the starting line of the
application form.
ACTION Redefine the corners of the help area so that the help area
location is correct in relation to the starting line number of
the application form.