HP 3000 Manuals HP 3000 Manuals
Adding Help to an Existing Form
1. From the main menu, press f1 (SELECT FRMS FIL).
2. Enter form file name and press ENTER .
3. Enter new help form name and press f1 (EDIT FORM).
4. Enter "Y" to create form.
5. Enter new help text and press ENTER . (Do not use RETURN or
ENTER keys to move cursor around on screen; use arrow keys.)
6. Press ENTER to save text entry.
7. Press ENTER again if form name displayed is correct. If form
name is not correct, enter the correct form name and press ENTER
.
8. If there is another help form to create, press f1 (EDIT FORM)
and go back to step 3. If there are no other forms to create,
continue to step 9.
9. Press f7 (FORM UTIL).
10. Press f1 (HELP AREAS).
11. Enter forms file name if forms file name displayed on screen is
not correct.
12. Enter form name which help form is to be attached to and press f2
(CREATE AREAS).
13. Move cursor to the upper left corner of help area and press f1
(UPPER LEFT).
14. Move cursor to the lower right corner of the help area and press
f2 (LOWER RIGHT).
15. Press f3 (HELP ATTR).
16. Enter name of help form created earlier that corresponds with the
help area you have just created and press ENTER .
17. To create additional help areas, go back to step 12. If you are
finished creating help areas on this form, continue with the next
step.
18. Press f8 (HELP MENU).
19. Press f8 (UTIL MENU).
20. Press f8 (EXIT FORM UTIL).
21. Press f8 (EXIT).