HP 3000 Manuals HP 3000 Manuals
Append To End Of Line From Macro
Purpose
Enables you to add text to the end of a line within an executing macro.
Default Syntax
$;
Description
This command, when executed within a macro, suspends a currently
executing macro and enables you to add text starting at the end of the
current line.
Command Process
When the macro pauses for your input, HP EDIT moves the cursor one column
beyond the last character of the current line, enabling you to add
unlimited text. You can add subsequent lines by pressing Return without
preceding it with the / key. When you have finished adding text, press /
and Return to return to Command mode. HP EDIT then resumes execution of
the macro.
Syntax Considerations
In order to use this command within a macro, you must properly construct
the macro using correct syntax. Refer to the Define Macro command for
information about required syntax.
Since the standard Meta key (ESC) is displayed as ^[ when inserted in a
macro, HP EDIT provides the dollar sign ($) as an alternate Meta key.
Consequently, you should use the recommended syntax of $; within a macro.
Procedure
To execute this command within a macro:
1. Construct the macro containing the command using proper macro
syntax. Refer to the Define Macro command for information about
constructing macros. If the macro is preemptive, skip to Step 3.
2. Execute the macro by pressing the m key. HP EDIT displays Specify
macroname on the message line.
3. Type the macro name as specified in the macro. HP EDIT executes
the macro and pauses for your input.
4. Provide the input and then press the / and Return keys to return
to Command mode. HP EDIT resumes execution of the macro.
Example
To construct, define, and execute a macro that pauses for you to append
text to the end of a line:
1. Insert a new line in text by executing the Insert Line (I)
command.
2. Type in the following macro beginning at the cursor position:
m;=AAppend to/^m$;; to add text./^m
3. Press / and Return to exit Text Entry mode and enter Command mode.
4. Execute the Define Macro (z) command. HP EDIT removes the macro
from the screen and stores it for subsequent execution.
5. Issue the Execute Macro (m) command. HP EDIT displays the
following prompt on the message line:
Specify macroname
6. Press the ; key. HP EDIT executes the macro and waits for your
input after the following text is displayed on your terminal:
Append to_
7. Press the Space bar and type end of line as shown:
Append to end of line_
8. Press / and Return to return to Command mode. HP EDIT resumes and
concludes the macro execution and appends to add text. following
your input as shown:
Append to end of line to add text._
Related Commands
Append Line From Macro
Append To Character From Macro
Append To End Of Line
Append To Word From Macro
Define Replace Pattern From Macro
Define Search Pattern From Macro
Insert Character From Macro
Insert Line From Macro
Replace Character From Macro
Replace Line From Macro
Replace Word From Macro
Overwrite From Macro