HP 3000 Manuals

HP EDIT Reference Manual

Hardware 

Requirements 

HP EDIT processes 16-bit characters on MPE/XL systems and operates in
Native Mode.

HP EDIT can process Asian characters on the following terminals:

   *   HP 700/92A Terminal
          *   HP part number C1010-TKC for use in Korea, Taiwan, and the
              People's Republic of China.
          *   HP part number C1010-TKJ for use in Japan.

   *   Asian HP Vectra
          *   For use in Korea, Taiwan, and the People's Republic of
              China.
          *   The Asian HP Vectra requires Advancelink B.

   *   HP Vectra/AX
          *   HP part number 45970C-AX for use in Japan.
          *   The HP Vectra/AX requires Advancelink/AX.

Restrictions 

Hewlett-Packard does not recommend using HP EDIT in network environments
that do not support a highly interactive dialog between the user and the
host machine.  This precludes networks, such as X.25, which have a large
amount of lag time (greater than one-half second) and which use separate
transmissions for prompting and reading responses.  Hewlett-Packard also
recommends that you do not use HP EDIT on heavily loaded systems or those
burdened with a large number of terminals.[REV END]
[REV BEG]

MPE/iX 5.0 Documentation