HP 3000 Manuals

HP SNA Products Remote System Configuration Guide

Appendix B  JES Examples 

This appendix contains sample JES and POWER configurations 
for the LU types described in chapter 2.

To ensure that the host configuration is compatible with HP's SNA
products, there are values that HP requires you set for some operands.
These values are in bold in this appendix.

If an operand is in bold but the value for it is not, you must include
the operand, but you do not have to set it to the value shown.  For
example, NUMRDR=2, means you must include the NUMRDR operand, but you do
not have to set it to 2.  There are also values that HP suggests for
other operands, which are noted.

Required parameters must be coded as specified.  Variable parameters must
be set within the constraints defined by HP and the host.


CAUTION  HP requires that the host be configured as defined in chapter 2
         of this manual.  Any HP time spent solving problems related to
         incorrect configuration of the host is billable to the customer
         on a time and materials basis.  The configuration listings must
         be available to your HP representative in case your installation
         requires servicing.


Examples begin on the next page.

MPE/iX 5.0 Documentation