HP 3000 Manuals HP 3000 Manuals
VERIFY
Verifies the entries in the Formid Lookup Table.
Syntax
_________________________________________________________________________
| |
| VERI[FY][;W[SID]=Wsid] |
_________________________________________________________________________
Parameter
Wsid The workstation name. This can be up to eight alphanumeric
characters long; the first character must be alphabetic.
If you omit this parameter, the default workstation identifier
is used. You can specify a default workstation identifier in
the NRJE command.
Description
After building the Formid Lookup Table and then configuring it in the
NRJE Configuration: Workstation Data Page 2 screen, you should use the
VERIFY command to verify all of the records. Note that all of the
devices in the Formid Lookup Table must be available. Also, if your
workstation is established over a data communications line (DS line), the
line must be open. For additional information about the Formid Lookup
Table, see the SNA NRJE User/Programmer Reference Manual.
You should be logged on as MANAGER.SYS,NRJE when you issue this command.
If any Formid Lookup Table records reference a tape device, then a tape
mount request will be sent to the operator's console. This command can
be terminated by a [CTRL]-Y.
Text Reference
See RELOAD earlier in this chapter for information about reloading the
Formid Lookup Table.
Example
_______________________________________________________________________________________________
| |
| R18>VERIFY |
| |
| ............... A dot is printed as each record is verified. |
| ALL RECORDS PASSED |
| R18> |
| |
| |
| If an error occurs, NRJE will report the nature of the error |
| and will continue checking the remainder of the records in the table.|
| |
| R18>VERIFY |
| |
| ...... |
| RECORD 7: |
| UNKNOWN DEVICE CLASS. (CIERR 344) |
| NRJE FORMID = ANNE ;FILE EQUATION ATTEMPTED: |
| FILE TEST7 ;DEV= NOTTHERE |
| |
| .. |
| RECORD 10; |
| NONEXISTENT PERMANENT FILE (FSERR 52) |
| NRJE FORMID = PUNOUT ;FILE EQUATION ATTEMPTED: |
| FILE TEST10 =PUNMSG,OLD |
| |
| ............... |
| |
| ALL BUT 2 RECORD(S) PASSED. |
| R18> |
| |
| If an error is detected, NRJE will report the logical record |
| number of concatenated records in the Formid Lookup Table. |
| The first record is record zero. |
_______________________________________________________________________________________________