HP 3000 Manuals HP 3000 Manuals
AS/400 Configuration Overview Before communication between the HP 3000 and the IBM SNA AS/400 system is possible, both systems must be configured. The AS/400 configuration should be done first, and it consists of specifying values for certain parameters. The AS/400 configuration must be coordinated with the SNA node configuration on the HP 3000. Coordination between the AS/400 system and the SNA services also must be done. The relationships between AS/400 parameters and HP 3000 configuration values are explained later in this chapter and in the Node Manager's Guide for each SNA service. Your IBM system programmer should send copies of the AS/400 configuration to you or your Hewlett-Packard support contact, so that this coordination can be accomplished. The HP SNA Products Remote System Configuration Guide (J2220-61025) explains AS/400 configuration for the SNA links.