HP 3000 Manuals HP 3000 Manuals
Status Returns
The first element of the status array returned by the Intrinsics (status
[1]) describes in broad terms the result of the Intrinsic call. If its
value is 0, the Intrinsic call was successfully completed without any
errors or exception conditions. The meaning of other values which may be
returned in this field are shown below:
Status [1]
-0 sres_success Intrinsic or transaction successful
-400 sres_parm1_unaccessible Cannot access first parameter
-401 sres_parm2_unaccessible Cannot access second parameter
-402 sres_parm3_unaccessible Cannot access third parameter
-403 sres_parm4_unaccessible Cannot access fourth parameter
-404 sres_parm5_unaccessible Cannot access fifth parameter
-405 sres_parm6_unaccessible Cannot access sixth parameter
-406 sres_parm7_unaccessible Cannot access seventh parameter
-407 sres_parm8_unaccessible Cannot access eighth parameter
-408 sres_parm9_unaccessible Cannot access ninth parameter
-409 sres_parm10_unaccessible Cannot access tenth parameter
-500 sres_no_ph_cap Application does not have PH capability
-501 sres_no_dh_cap Application does not have DS capability
-502 sres_no_sf_cap User does not have SF capability
-1000 sres_no_user_signon Application is not signed on as a user
-1001 sres_no_gate_signon Application is not signed on as a gateway
-1002 sres_no_signon Application is not signed on as a user or
gateway
-1003 sres_desk_down HP Desk is not available
-1004 sres_not_installed The HP Desk Intrinsics product is not
installed
-1005 sres_intrin_incompat HP Desk Intrinsics software and message
catalog are incompatible
-1006 sres_dataset_full A dataset is full
-1007 sres_userint_disabled HP Desk User Intrinsics sessions are
disabled
-1008 sres_gateint_disabled HP Desk Gateway Intrinsics sessions are
disabled
-1009 sres_no_sys_resource No MPE system resource
-1010 sres_load_error Cannot load Intrinsics Driver program
-1011 HP Desk Intrinsics software and message
sres_desk_intrin_incompat catalog are incompatible
-1012 sres_open_deskcat_fail Cannot open MAILCAT.MAILLIB.HPOFFICE
-1013 Cannot open INTRNCAT.MAILLIB.HPOFFICE
sres_open_intrincat_fail
-1014 sres_open_intrnlog_fail Cannot open INTRNLOG.MAILDB.HPOFFICE
-1015 sres_open_dictfile_fail Cannot open MAILDICT.MAILLIB.HPOFFICE
-1100 sres_tfile_access_fail Cannot access Transaction File
-1101 sres_tfile_create_fail Cannot create Transaction File
-1110 One or more transaction records has an
sres_invalid_trans_records invalid field
-1111 sres_bad_trans_sequence Transaction records are out of sequence,
or a transaction has an invalid type
-1112 sres_empty_tfile The Transaction File is empty
-1114 sres_tfile_too_small The Transaction File is too small
-1115 The record size of the Transaction File is
sres_tfile_recsize_too_small too small
-1116 sres_missing_tfile_name A Transaction File name must be supplied
-1118 sres_not_eof Unexpected records at end of Transaction
File
+1119 sres_tfile_warning Warning! Message sent although one or
more transaction records has an invalid
field
+1120 sres_acc_fail_error Warning! Message sent although one or
more transaction records has an error,
allowed by the Session Profile
sp_accept_fail transaction
-1121 sres_no_def_fname No default Transaction File name defined
-1122 You cannot create a randomly named
sres_random_open_disallowed Transaction File with this Intrinsic
-1123 sres_tfile_doesnt_exist Named Transaction File does not exist
-1124 sres_bad_tfile_code Transaction file has a bad file code
-1126 sres_filesys_error A File System error has been encountered
and registered in status subsys error
-1130 sres_insuff_discspace There was insufficient disc space to
create a file
-1131 sres_insuff_groupspace There was insufficient group disc space to
create a file
-1132 sres_insuff_accspace There was insufficient account disc space
to create a file
-1133 sres_sys_dir_overflow A system directory overflow condition was
generated while attempting to create a
file
-1134 sres_temp_dir_overflow A job temporary directory overflow
condition was generated while trying to
create a file
-1200 sres_invalid_op_type Invalid op. type
-1202 sres_no_matching_items No matching items
-1203 sres_invalid_body_type Body type field in tt_body type
transaction is invalid
-1204 sres_invalid_body_class Body class field in tt_body type
transaction is invalid
-1205 sres_insuff_desk_caps User does not have the capability to use
this Intrinsic
-1206 sres_partial_delete One or more delete transactions failed
-1207 sres_missing_bodytype Transaction file does not start with a
tt_body type transaction
+1208 sres_item_not_found Warning! Selected item not found
-1900 sres_unex_error Unexpected error
-2000 sres_invalid_username Username is invalid or badly formed
-2001 sres_long_username Username exceeds 36 characters
-2002 sres_missing_username Username must be supplied
-2003 sres_invalid_nodename Usernode is invalid or badly formed
-2004 sres_unknown_user User is not configured
-2005 sres_user_not_unique Usernode must be supplied as the user is
configured on more than one node
-2006 Principal name is invalid or badly formed
sres_invalid_principalname
-2007 sres_long_principalname Principal name exceeds 36 characters
-2008 Principal node is invalid or badly formed
sres_invalid_princ_nodename
-2009 sres_user_not_designate User is not configured as a Designate of
the Principal
-2010 Principal node must be supplied as the
sres_principal_not_unique Principal is configured on more than one
node
-2011 sres_signedon_elsewhere User is already signed on in another HP
Desk or Intrinsics session
-2200 Gateway name is invalid or badly formed
sres_invalid_gatewayname
-2201 sres_blank_gatewayname Gateway name must be supplied
-2202 sres_unknown_gateway Gateway is not configured
-2203 sres_gateway_not_intrin Gateway is not an Intrinsics gateway
-2204 sres_no_default_user A Default User must be configured on the
database
-2400 sres_wrong_password Password is incorrect
-3002 sres_no_current_msg No current message to forward or reply to
-3400 sres_no_recipients Message has no recipients
-3404 Failed to access file
sres_cannot_access_defipcin DEFIPCIN.MAILDB.HPOFFICE
-3405 Failed to access file
sres_cannot_access_mripcin
MRIPCIN.MAILDB.HPOFFICE
-3406 The Transaction File is incomplete
sres_incomplete_trans_file
-3407 No message has just been received, or it
sres_original_message_invalid is invalid
-3408 sres_msg_too_big Message is bigger than configured maximum
-3409 Start package transaction has no
sres_bad_package_structure corresponding End package transaction
-4100 Search item is invalid
sres_invalid_search_item
-4101 Search item does not exist
sres_nonexistent_search_item
-4102 sres_no_countries No countries are configured
-4103 sres_no_locations There are no locations matching the
selection criteria
-4104 sres_no_mailnodes There are no mailnodes matching the
selection criteria
-4105 sres_no_users There are no users matching the selection
criteria
-4106 sres_invalid_node Node is invalid or badly formed
-4107 sres_invalid_name Name is invalid or badly formed
-4108 sres_multiple_names Recipient name is not unique and node has
not been supplied
-4109 sres_no_matching_users There are no users with similar names to
those supplied
-4110 sres_unknown_node Node is not a configured mailnode
-4111 sres_unknown_name Name is not a configured user name
-4112 sres_unknown_server Server is not configured
-4113 sres_missing_node Node must be supplied
-4114 sres_missing_name User name must be supplied
-4115 sres_invalid_server Server name is invalid or badly formed
-4116 sres_missing_server Server name must be supplied
-4117 sres_invalid_country Country is invalid or badly formed
-4118 sres_missing_country Country must be supplied[REV BEG]
-4119 sres_dup_name_on_node User name is not unique[REV END]
-5000 Message source is invalid
sres_invalid_message_source
+5400 sres_no_messages No messages to receive
+5401 Message generated even though one or more
sres_item_conversion_failed item conversions failed
-5402 sres_message_too_big Message is larger than the size allowed
through the gateways
-5404 sres_disallowed_message Message not allowed to pass through the
gateway (for example a server message)
-5405 sres_no_nodes No nodes are routed through the gateway
-5406 sres_nesting_too_deep A composite item was found that contained
too many nested items (more than 50)
-5407 sres_missing_selector Expected a selector type transaction 5100
or 5200 following the body type
-5408 sres_bad_selector Unexpected transaction type following body
type. A selector transaction type 5100 or
5200 was expected
-5409 sres_incompat_selector That selector transaction (5100 or 5200)
is not compatible with the message source
-5410 sres_no_entry_found The HP Desk item selected by transaction
type 5100 or 5200 does not exist
-5411 sres_invalid_selector The selector transaction (type 5100 or
5200) is not consistent with the current
list of that area
-5412 sres_sel_item_deleted The HP Desk item referenced has been
deleted
-5413 sres_too_many_gateways Maximum number of concurrent gateways
exceeded
-5414 sres_too_many_drivers Maximum number of concurrent Drivers
exceeded
-5415 sres_too_many_nodes Maximum number of concurrent nodes
exceeded
+5416 sres_foreign_truncated Warning! One or more foreign address
fields truncated due to insufficient
allocated in transaction record
+5417 Warning! Ouput message contains encrypted
sres_msg_has_encrypted_item items
+5418 Warning! This is a Principal's private
sres_principal_private_msg message[REV BEG]
+5420 sres_message_forwarded Warning! This routed message has been
forwardedto the next recipient in the
Route List[REV END][REV BEG]
+5421 sres_message_rejected Warning! This routed message has been
rejected[REV END]
-6000 Diary access not permitted
sres_diary_access_disallowed
-6100 Missing required transaction records
sres_missing_trans_records
-6101 sres_no_type_5300 Required type 5300 missing
-6102 sres_no_type_5400 Required type 5400 missing
-6103 sres_no_type_11210 Required type 11210 missing
-6104 sres_no_type_11700 Required type 11700 missing
-6105 sres_no_type_11750 Required type 11750 missing
-6106 sres_incompatible_type Incompatible transaction type
-6107 sres_duplicate_type Duplicate transaction type
-6108 sres_invalid_type Invalid transaction type
-6150 Body type is inconsistent with the
sres_inconsistent_body_type Intrinsic
-6200 Invalid field entry (refer to status [3]
sres_invalid_field_entry and status [4] for more details)
-6300 Disallowed appointment clash
sres_disallowed_appt_clash
-6400 sres_bad_content_file Bad content reference transaction
-6401 sres_empty_content_file Referenced content file is empty
-6402 Referenced content file does not exist
sres_content_doesnt_exist
-6500 sres_userdate_full User-date dataset is full
-6501 sres_entry_index_full Entry-index dataset is full
-6502 sres_owns_full Owns dataset is full
-6503 Mail-item subject dataset is full
sres_mail_item_subj_full
-6504 sres_insertion_full Insertion dataset is full
-6505 sres_keyword_full Keyword dataset is full
-6506 sres_simple_entry_full Simple entry dataset is full
-7000 sres_no_current_message There is no current message to delete
-7001 Selected message does not exist
sres_message_does_not_exist
-7200 Message length is invalid
sres_message_len_invalid
-7201 sres_no_message_exists No message exists for supplied code
-7202 The message is longer than the supplied
sres_message_len_too_big message length
-8100 sres_no_items_in_tray No items in In Tray
-8300 sres_no_convert_trans No tt_convert transaction found in file
+8400 Warning! Converted file located in
sres_file_in_runtime_grp run-time group
[REV BEG]
Status [2]
This is reserver for future use.
Status [3]
This reports the number of erroneous transactions in the Transaction File
(where relevant).
Status [4]
This shows the position in the file of the first erroneous trasaction
(where relevant). A value of 0 refer to the first record in the file.
Status [5]
This shows subsystem errors (where relevant).
1 subsys_fs Error detected by an MPE file system
Intrinsic
2 subsys_image Error detected by an IMAGE Intrinsic
10 subsys_process Error detected by an MPE create process
Intrinsic
11 subsys_procinfo Error detected by MPE ProcInfo
12 subsys_genmsg Error detected on MPE Genmessage
13 subsys_jobinfo Error detected on MPE Jobinfo
14 subsys_mbox Error detected on MPE Send/ReceiveMail
15 subsys_nm_switch Error detected with MPE/XL Hpswitchtocm
(MPE/XL) only
20000 Internal error in HP Desk
30000 Unexpected error
Status [6]
This displays an error value if Status [5] <> 0. For example, if Status
[5] has a value of 1, Status [6] gives the number of the FS error which
has occurred.
1 subsys_fs File system error value
2 subsys_image IMAGE error value
10 subsys_process CreateProcess error value
11 subsys_procinfo ProcInfo error value
12 subsys_genmsg GenMessage error value
13 subsys_jobinfo Error detected on MPE Jobinfo
14 subsys_mbox Error detected on MPE Send/ReceiveMail
15 subsys_nm_switch Error detected with MPE/XL Hpswitchtocm
Status [7-12]
This displays other information, dependant on the value of Status
[1].[REV END]